Unlike the Alice2 chips used on 1st generation E-MU cards, the Tina/Tina2 chips used on the 2nd gen cards have only six GPIN pins, which means that we need to use a smaller mask. Failure to do so would falsify the read data if the FPGA tried to raise an IRQ right at that moment. This wasn't a problem so far, as we didn't actually enable FPGA IRQs, but that's going to change soon.

Signed-off-by: Oswald Buddenhagen oswald.buddenhagen@gmx.de --- v2: - added description --- include/sound/emu10k1.h | 3 ++- sound/pci/emu10k1/io.c | 5 ++++- 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 89dbd2e93410..83130965c90a 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -252,7 +252,8 @@ #define MUSTAT_ORDYN 0x40 /* 0 = MUDATA can accept a command or data */

#define A_GPIO 0x18 /* GPIO on Audigy card (16bits) */ -#define A_GPINPUT_MASK 0xff00 +#define A_GPINPUT_MASK 0xff00 /* Alice/2 has 8 input pins */ +#define A3_GPINPUT_MASK 0x3f00 /* ... while Tina/2 has only 6 */ #define A_GPOUTPUT_MASK 0x00ff

// The GPIO port is used for I/O config on Sound Blasters; diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c index f0134689c320..42b06f2e5552 100644 --- a/sound/pci/emu10k1/io.c +++ b/sound/pci/emu10k1/io.c @@ -255,16 +255,19 @@ void snd_emu1010_fpga_write(struct snd_emu10k1 *emu, u32 reg, u32 value)

void snd_emu1010_fpga_read(struct snd_emu10k1 *emu, u32 reg, u32 *value) { + // The higest input pin is used as the designated interrupt trigger, + // so it needs to be masked out. + u32 mask = emu->card_capabilities->ca0108_chip ? 0x1f : 0x7f; unsigned long flags; if (snd_BUG_ON(reg > 0x3f)) return; reg += 0x40; /* 0x40 upwards are registers. */ spin_lock_irqsave(&emu->emu_lock, flags); outw(reg, emu->port + A_GPIO); udelay(10); outw(reg | 0x80, emu->port + A_GPIO); /* High bit clocks the value into the fpga. */ udelay(10); - *value = ((inw(emu->port + A_GPIO) >> 8) & 0x7f); + *value = ((inw(emu->port + A_GPIO) >> 8) & mask); spin_unlock_irqrestore(&emu->emu_lock, flags); }