From: Fabio Estevam fabio.estevam@freescale.com

sgtl5000 microphone gain only has 2 bits of resolution, so maximum value is 3.

From Eric Nelson:

"We also found that for the microphones we have here (commodity PC boom mics) a default value of 2 for the gain gives the best results."

So change the default microphone gain as well.

Signed-off-by: Eric Nelson eric.nelson@boundarydevices.com Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- Changes since v1: - Add sgtl5000 into the Subject

sound/soc/codecs/sgtl5000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index cb1675c..92bbfec 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -401,7 +401,7 @@ static const struct snd_kcontrol_new sgtl5000_snd_controls[] = { 5, 1, 0),

SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL, - 0, 4, 0, mic_gain_tlv), + 0, 3, 0, mic_gain_tlv), };

/* mute the codec used by alsa core */ @@ -1344,7 +1344,7 @@ static int sgtl5000_probe(struct snd_soc_codec *codec) SGTL5000_HP_ZCD_EN | SGTL5000_ADC_ZCD_EN);

- snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 0); + snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 2);

/* * disable DAP