[alsa-devel] Patch to enable audio on alc888 vendor id 0x10ec0888 revision id 0x100202

newer
[alsa-devel] [PATCH 1/3] ALSA: hda...

older
[alsa-devel] [PATCH] ASoc: tegra:...

Greg Farrell

6 Oct 2014 6 Oct '14

4:16 p.m.

Hi,

I am dealing with some Atom based boards that have a Realtek ALC888 providing HDA-Intel codec support. Vendor_id of 0x10ec0888.

These boards worked for us when they came with an earlier revision of the chip but did not work for us with a revision_id of 0x100202 .

Symptoms on kernel 3.11 (FC18) and 3.17rc7 were identical - sound was present but was almost completely inaudible even when mixers were raised to the max.

Investigations showed that forcing OFF EAPD resulted in normal amplified sound while turning it on resulted in the almost inaudible sound. This is - to my limited understanding - counter to how other chipsets work and makes me wonder if this particular chip version has an inverted EAPD bit. It was also necessary to skip the normal ALC888 coef fixup code (alc888_coef_init) in order for sound to work correctly.

I'm providing a patch that performs this behaviour only for alc888's with a vendor_id of 0x10ec0888 and a revision_id of 0x100202. It applies cleanly against 3.11 and 3.17rc7 but as I do not have a suitable build host for a 3.17 kernel it has only been tested with the 3.11 kernel.

I hope this is useful to anyone else running into this problem with this particular hardware.

Greg

greg@gregfarrell.org greg.farrell@lincor.com

--- a/sound/pci/hda/patch_realtek.c 2014-10-03 16:41:50.374730157 +0100 +++ b/sound/pci/hda/patch_realtek.c 2014-10-03 16:52:57.539099277 +0100 @@ -289,7 +289,11 @@ { unsigned int tmp;

- alc_auto_setup_eapd(codec, true); + if ( !(codec->vendor_id == 0x10ec0888 && codec->revision_id == 0x100202) ) + alc_auto_setup_eapd(codec, true); + else + printk(KERN_INFO "hda_codec: %s: alc_auto_init_amp skipping alc_auto_setup_eapd due to chip revision test", codec->chip_name); + switch (type) { case ALC_INIT_GPIO1: snd_hda_sequence_write(codec, alc_gpio1_init_verbs); @@ -323,7 +327,10 @@ alc889_coef_init(codec); break; case 0x10ec0888: - alc888_coef_init(codec); + if ( codec->revision_id != 0x100202 ) + alc888_coef_init(codec); + else + printk(KERN_INFO "hda_codec: %s: alc_auto_init_amp 0x10ec0888 type skipping alc888_coef_init due to revision_id test", codec->chip_name); break; #if 0 /* XXX: This may cause the silent output on speaker on some machines */ case 0x10ec0267:

Show replies by date

Takashi Iwai

6 Oct 6 Oct

4:24 p.m.

New subject: [alsa-devel] Patch to enable audio on alc888 vendor id 0x10ec0888 revision id 0x100202

Adding Kailang to Cc, who should have a better clue about this.

At Mon, 06 Oct 2014 15:16:25 +0100, Greg Farrell wrote:

...

Hi,

I am dealing with some Atom based boards that have a Realtek ALC888 providing HDA-Intel codec support. Vendor_id of 0x10ec0888.

These boards worked for us when they came with an earlier revision of the chip but did not work for us with a revision_id of 0x100202 .

Symptoms on kernel 3.11 (FC18) and 3.17rc7 were identical - sound was present but was almost completely inaudible even when mixers were raised to the max.

Investigations showed that forcing OFF EAPD resulted in normal amplified sound while turning it on resulted in the almost inaudible sound. This is - to my limited understanding - counter to how other chipsets work and makes me wonder if this particular chip version has an inverted EAPD bit. It was also necessary to skip the normal ALC888 coef fixup code (alc888_coef_init) in order for sound to work correctly.

I'm providing a patch that performs this behaviour only for alc888's with a vendor_id of 0x10ec0888 and a revision_id of 0x100202. It applies cleanly against 3.11 and 3.17rc7 but as I do not have a suitable build host for a 3.17 kernel it has only been tested with the 3.11 kernel.

I hope this is useful to anyone else running into this problem with this particular hardware.

Is the chip really identified as ALC888 by the driver? Please give alsa-info.sh output (run with --no-upload option), just to be sure. The same codec ID (10ec:0888) is used by various chips, so we may need to use a different thing to check the validity of alc888_coef_init() application.

thanks,

Takashi

...

Greg

greg@gregfarrell.org greg.farrell@lincor.com

--- a/sound/pci/hda/patch_realtek.c 2014-10-03 16:41:50.374730157 +0100 +++ b/sound/pci/hda/patch_realtek.c 2014-10-03 16:52:57.539099277 +0100 @@ -289,7 +289,11 @@ { unsigned int tmp;

alc_auto_setup_eapd(codec, true);

if ( !(codec->vendor_id == 0x10ec0888 && codec->revision_id ==

0x100202) )
   alc_auto_setup_eapd(codec, true);
else
   printk(KERN_INFO "hda_codec: %s: alc_auto_init_amp skipping 
alc_auto_setup_eapd due to chip revision test", codec->chip_name);
switch (type) {
case ALC_INIT_GPIO1:
    snd_hda_sequence_write(codec, alc_gpio1_init_verbs);
@@ -323,7 +327,10 @@ alc889_coef_init(codec); break; case 0x10ec0888:
       alc888_coef_init(codec);
       if ( codec->revision_id != 0x100202 )
           alc888_coef_init(codec);
       else
           printk(KERN_INFO "hda_codec: %s: alc_auto_init_amp 
0x10ec0888 type skipping alc888_coef_init due to revision_id test", codec->chip_name); break; #if 0 /* XXX: This may cause the silent output on speaker on some machines */ case 0x10ec0267:

Greg Farrell

4:52 p.m.

On 06/10/14 15:24, Takashi Iwai wrote:

...

Is the chip really identified as ALC888 by the driver? Please give alsa-info.sh output (run with --no-upload option), just to be sure. The same codec ID (10ec:0888) is used by various chips, so we may need to use a different thing to check the validity of alc888_coef_init() application. thanks, Takashi

It is. One other thing of note is that there is a 'SKU not ready' error.

I originally intended to just cut & paste enough content from the alsa-info.sh output file to show it is detected as a ALC888 chip but figured that I was better giving you everything rather than filtering based on what I feel is helpful to you. Apologies for the size of the email.

This is from a FC20 machine running 3.17rc7. Output is very similar on Fedora 18 / 3.11 kernel where it is also detected as ALC888 and the behaviour is identical.

Greg

upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.64 !!################################

!!Script ran on: Thu Oct 2 10:47:45 UTC 2014

!!Linux Distribution !!------------------

Fedora release 20 (Heisenbug) Fedora release 20 (Heisenbug) NAME=Fedora ID=fedora PRETTY_NAME="Fedora 20 (Heisenbug)" CPE_NAME="cpe:/o:fedoraproject:fedora:20" HOME_URL="https://fedoraproject.org/" BUG_REPORT_URL="https://bugzilla.redhat.com/" REDHAT_BUGZILLA_PRODUCT="Fedora" REDHAT_BUGZILLA_PRODUCT_VERSION=20 REDHAT_SUPPORT_PRODUCT="Fedora" REDHAT_SUPPORT_PRODUCT_VERSION=20 Fedora release 20 (Heisenbug) Fedora release 20 (Heisenbug)

!!DMI Information !!---------------

Manufacturer: JAOtech Limited Product Name: JAO-ATOM-L-N270-945GSE-00 Product Version: 6.0 Firmware Version: 6.00 PG

!!Kernel Information !!------------------

Kernel release: 3.17.0-0.rc7.git0.1.vanilla.mainline.knurd.1.fc20.i686 Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: Yes

!!ALSA Version !!------------

Driver version: k3.17.0-0.rc7.git0.1.vanilla.mainline.knurd.1.fc20.i686 Library version: Utilities version: 1.0.27.2

!!Loaded ALSA modules !!-------------------

snd_hda_intel

!!Sound Servers on this system !!----------------------------

Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes

!!Soundcards recognised by ALSA !!-----------------------------

0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfdff8000 irq 26

!!PCI Soundcards installed in the system !!--------------------------------------

00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)

!!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------

00:1b.0 0403: 8086:27d8 (rev 02) Subsystem: 8086:27d8

!!Loaded sound module options !!---------------------------

!!Module: snd_hda_intel align_buffer_size : -1 bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N snoop : Y

!!HDA-Intel Codec information !!--------------------------- --startcollapse--

Codec: Realtek ALC888 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0888 Subsystem Id: 0xe6fe0000 Revision Id: 0x100202 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 CLKSTOP Power: setting=D0, actual=D0 GPIO: io=2, o=0, i=0, unsolicited=1, wake=1 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x411: Stereo Device: name="ALC888 Analog", type="Audio", device=0 Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x411: Stereo Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x411: Stereo Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x05 [Audio Output] wcaps 0x411: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 Device: name="ALC888 Digital", type="SPDIF", device=1 Converter: stream=5, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="ALC888 Analog", type="Audio", device=0 Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x1e 0x1e] Converter: stream=1, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=1, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=1, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="ALC888 Alt Analog", type="Audio", device=2 Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100711: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Mic Playback Volume", index=1, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Mic Playback Switch", index=1, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=5, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=5, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x1f 0x1f] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x1f 0x1f] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Control: name="Surround Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x1f 0x1f] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Control: name="Center Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Volume", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x1f 0x1f] Connection: 2 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x05 0x0b Node 0x10 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x11 [Pin Complex] wcaps 0x400780: Mono Digital Pincap 0x00000014: OUT Detect Pin Default 0x411110f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x10 Node 0x12 [Pin Complex] wcaps 0x400401: Stereo Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Line Out Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001003e: IN OUT HP EAPD Detect Trigger EAPD 0x2: EAPD Pin Default 0x04014110: [Jack] Line Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x15 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001003e: IN OUT HP EAPD Detect Trigger EAPD 0x2: EAPD Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c 0x0d* 0x0e 0x0f 0x26 Node 0x16 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c 0x0d 0x0e* 0x0f 0x26 Node 0x17 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c 0x0d 0x0e 0x0f* 0x26 Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Center Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Switch", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Control: name="Mic Boost Volume", index=1, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Mic Jack", index=1, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x04a19830: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x21: IN VREF_50 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Surround Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Mic Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x04a1383f: [Jack] Mic at Ext Right Conn = 1/8, Color = Blue DefAssociation = 0x3, Sequence = 0xf Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1c [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x598301f0: [N/A] Line In at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1e [Pin Complex] wcaps 0x400780: Mono Digital Control: name="SPDIF Phantom Jack", index=0, device=0 Pincap 0x00000014: OUT Detect Pin Default 0x99430120: [Fixed] SPDIF Out at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0x2, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400680: Mono Digital Pincap 0x00000024: IN Detect Pin Default 0x41c46060: [N/A] SPDIF In at Ext Rear Conn = RCA, Color = Orange DefAssociation = 0x6, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=25 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 12 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b 0x12 Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Audio Output] wcaps 0x411: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x25 0x0b --endcollapse--

!!ALSA Device nodes !!-----------------

crw-rw----+ 1 root audio 116, 2 Oct 2 11:45 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 7 Oct 2 11:45 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 4 Oct 2 11:46 /dev/snd/pcmC0D0c crw-rw----+ 1 root audio 116, 3 Oct 2 11:46 /dev/snd/pcmC0D0p crw-rw----+ 1 root audio 116, 5 Oct 2 11:46 /dev/snd/pcmC0D1p crw-rw----+ 1 root audio 116, 6 Oct 2 11:45 /dev/snd/pcmC0D2c crw-rw----+ 1 root audio 116, 1 Oct 2 11:45 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Oct 2 11:45 /dev/snd/timer

/dev/snd/by-path: total 0 drwxr-xr-x. 2 root root 60 Oct 2 11:45 . drwxr-xr-x. 3 root root 220 Oct 2 11:45 .. lrwxrwxrwx. 1 root root 12 Oct 2 11:45 pci-0000:00:1b.0 -> ../controlC0

!!ALSA configuration files !!------------------------

!!System wide config file (/etc/asound.conf)

# # Place your global alsa-lib configuration here... #

!!Aplay/Arecord output !!--------------------

APLAY

**** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0

ARECORD

**** List of CAPTURE Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: ALC888 Alt Analog [ALC888 Alt Analog] Subdevices: 1/1 Subdevice #0: subdevice #0

!!Amixer output !!-------------

!!-------Mixer controls for card 0 [Intel]

Card hw:0 'Intel'/'HDA Intel at 0xfdff8000 irq 26' Mixer name : 'Realtek ALC888' Components : 'HDA:10ec0888,e6fe0000,00100202' Controls : 39 Simple ctrls : 18 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] [0.00dB] Front Right: Playback 255 [100%] [0.00dB] Simple mixer control 'Front',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [on] Front Right: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'Surround',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [on] Front Right: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'Center',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'LFE',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 3 [100%] [30.00dB] Front Right: 3 [100%] [30.00dB] Simple mixer control 'Mic',1 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Mic Boost',1 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 3 [100%] [30.00dB] Front Right: 3 [100%] [30.00dB] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'IEC958 Default PCM',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'Beep',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [12.00dB] [on] Front Right: Playback 31 [100%] [12.00dB] [on] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 31 Front Left: Capture 30 [97%] [28.50dB] [on] Front Right: Capture 30 [97%] [28.50dB] [on] Simple mixer control 'Capture',1 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 31 Front Left: Capture 0 [0%] [-16.50dB] [off] Front Right: Capture 0 [0%] [-16.50dB] [off] Simple mixer control 'Channel Mode',0 Capabilities: enum Items: '2ch' '4ch' '6ch' Item0: '2ch' Simple mixer control 'Input Source',0 Capabilities: cenum Items: 'Mic' 'Mic 1' Item0: 'Mic' Simple mixer control 'Input Source',1 Capabilities: cenum Items: 'Mic' 'Mic 1' Item0: 'Mic'

!!Alsactl output !!--------------

--startcollapse-- state.Intel { control.1 { iface MIXER name 'Channel Mode' value '2ch' comment { access 'read write' type ENUMERATED count 1 item.0 '2ch' item.1 '4ch' item.2 '6ch' } } control.2 { iface MIXER name 'Front Playback Volume' value.0 31 value.1 31 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -4650 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.3 { iface MIXER name 'Front Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.4 { iface MIXER name 'Surround Playback Volume' value.0 31 value.1 31 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -4650 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.5 { iface MIXER name 'Surround Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.6 { iface MIXER name 'Center Playback Volume' value 31 comment { access 'read write' type INTEGER count 1 range '0 - 31' dbmin -4650 dbmax 0 dbvalue.0 0 } } control.7 { iface MIXER name 'LFE Playback Volume' value 31 comment { access 'read write' type INTEGER count 1 range '0 - 31' dbmin -4650 dbmax 0 dbvalue.0 0 } } control.8 { iface MIXER name 'Center Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.9 { iface MIXER name 'LFE Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.10 { iface MIXER name 'Mic Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.11 { iface MIXER name 'Mic Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.12 { iface MIXER name 'Mic Playback Volume' index 1 value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.13 { iface MIXER name 'Mic Playback Switch' index 1 value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.14 { iface MIXER name 'Input Source' value Mic comment { access 'read write' type ENUMERATED count 1 item.0 Mic item.1 'Mic 1' } } control.15 { iface MIXER name 'Input Source' index 1 value Mic comment { access 'read write' type ENUMERATED count 1 item.0 Mic item.1 'Mic 1' } } control.16 { iface MIXER name 'Capture Volume' value.0 30 value.1 30 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -1650 dbmax 3000 dbvalue.0 2850 dbvalue.1 2850 } } control.17 { iface MIXER name 'Capture Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.18 { iface MIXER name 'Capture Volume' index 1 value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -1650 dbmax 3000 dbvalue.0 -1650 dbvalue.1 -1650 } } control.19 { iface MIXER name 'Capture Switch' index 1 value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.20 { iface MIXER name 'Mic Boost Volume' value.0 3 value.1 3 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3000 dbvalue.0 3000 dbvalue.1 3000 } } control.21 { iface MIXER name 'Mic Boost Volume' index 1 value.0 3 value.1 3 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3000 dbvalue.0 3000 dbvalue.1 3000 } } control.22 { iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.23 { iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.24 { iface MIXER name 'IEC958 Playback Default' value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.25 { iface MIXER name 'IEC958 Playback Switch' value false comment { access 'read write' type BOOLEAN count 1 } } control.26 { iface MIXER name 'IEC958 Default PCM Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.27 { iface MIXER name 'Master Playback Volume' value 31 comment { access 'read write' type INTEGER count 1 range '0 - 31' dbmin -4650 dbmax 0 dbvalue.0 0 } } control.28 { iface MIXER name 'Master Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.29 { iface CARD name 'Mic Jack' value true comment { access read type BOOLEAN count 1 } } control.30 { iface CARD name 'Mic Jack' index 1 value true comment { access read type BOOLEAN count 1 } } control.31 { iface CARD name 'Line Out Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.32 { iface CARD name 'SPDIF Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.33 { iface MIXER name 'Beep Playback Volume' value.0 31 value.1 31 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 1200 dbvalue.1 1200 } } control.34 { iface MIXER name 'Beep Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.35 { iface PCM name 'Playback Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.36 { iface PCM name 'Capture Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.37 { iface PCM device 1 name 'Playback Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.38 { iface PCM device 2 name 'Capture Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.39 { iface MIXER name 'PCM Playback Volume' value.0 255 value.1 255 comment { access 'read write user' type INTEGER count 2 range '0 - 255' tlv '0000000100000008ffffec1400000014' dbmin -5100 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } } --endcollapse--

!!All Loaded Modules !!------------------

Module fuse ip6t_rpfilter ip6t_REJECT xt_conntrack bnep bluetooth cfg80211 rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iTCO_wdt ppdev iTCO_vendor_support snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel uvcvideo snd_hda_controller snd_hda_codec videobuf2_vmalloc videobuf2_memops coretemp videobuf2_core v4l2_common snd_hwdep videodev snd_seq snd_seq_device serio_raw pcspkr snd_pcm media i2c_i801 joydev snd_timer lpc_ich snd soundcore parport_pc parport acpi_cpufreq i915 i2c_algo_bit video drm_kms_helper e1000e drm ata_generic pata_acpi ptp pps_core

!!Sysfs Files !!-----------

/sys/class/sound/hwC0D0/init_pin_configs: 0x11 0x411110f0 0x12 0x411111f0 0x14 0x04014110 0x15 0x411111f0 0x16 0x411111f0 0x17 0x411111f0 0x18 0x04a19830 0x19 0x04a1383f 0x1a 0x411111f0 0x1b 0x411111f0 0x1c 0x411111f0 0x1d 0x598301f0 0x1e 0x99430120 0x1f 0x41c46060

/sys/class/sound/hwC0D0/driver_pin_configs:

/sys/class/sound/hwC0D0/user_pin_configs:

/sys/class/sound/hwC0D0/init_verbs:

/sys/class/sound/hwC0D0/hints:

!!ALSA/HDA dmesg !!--------------

[ 18.164118] uvcvideo: Found UVC 1.00 device USB Camera Device (174f:142b) [ 18.193973] snd_hda_intel 0000:00:1b.0: irq 26 for MSI/MSI-X [ 18.200809] input: USB Camera Device as /devices/pci0000:00/0000:00:1e.0/0000:02:03.2/usb2/2-2/2-2:1.0/input/input8 -- [ 18.201610] USB Video Class driver (1.1.1) [ 18.305764] sound hdaudioC0D0: ALC888: SKU not ready 0x598301f0 [ 18.305987] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 18.305999] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.306072] sound hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.306080] sound hdaudioC0D0: mono: mono_out=0x0 [ 18.306088] sound hdaudioC0D0: dig-out=0x1e/0x0 [ 18.306095] sound hdaudioC0D0: inputs: [ 18.306105] sound hdaudioC0D0: Mic=0x19 [ 18.306114] sound hdaudioC0D0: Mic=0x18 [ 18.392187] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 18.392652] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 18.396462] iTCO_vendor_support: vendor-support=0

Takashi Iwai

4:55 p.m.

New subject: [alsa-devel] Patch to enable audio on alc888 vendor id 0x10ec0888 revision id 0x100202

At Mon, 06 Oct 2014 15:52:36 +0100, Greg Farrell wrote:

...

On 06/10/14 15:24, Takashi Iwai wrote:

...
Is the chip really identified as ALC888 by the driver? Please give alsa-info.sh output (run with --no-upload option), just to be sure. The same codec ID (10ec:0888) is used by various chips, so we may need to use a different thing to check the validity of alc888_coef_init() application. thanks, Takashi

It is. One other thing of note is that there is a 'SKU not ready' error.

This message is irrelevant. It means just that the codec SSID isn't set in Realtek-compliant way.

...

I originally intended to just cut & paste enough content from the alsa-info.sh output file to show it is detected as a ALC888 chip but figured that I was better giving you everything rather than filtering based on what I feel is helpful to you. Apologies for the size of the email.

Yep, that's more helpful indeed.

I'll wait for Kailang's comment on this issue.

thanks,

Takashi

Kailang

7 Oct 7 Oct

11:38 a.m.

New subject: [alsa-devel] Patch to enable audio on alc888 vendor id 0x10ec0888 revisionid 0x100202

Hi Takashi,

It maybe wrong format for verb table of 0x1d. I think the verb table was not create by Realtek AE. EAPD need to high level for this case. But its SSID was not assigned. It didn't use fixup table to support it.

1. Create SVID and SSID 2. Change BIOS verb table of 0x1d

I will check with our AE for the verb table setting.

BR, Kailang

...

-----Original Message----- From: Takashi Iwai [mailto:tiwai@suse.de] Sent: Monday, October 06, 2014 10:56 PM To: Greg Farrell Cc: alsa-devel@alsa-project.org; Jaroslav Kysela; Kailang Subject: Re: Patch to enable audio on alc888 vendor id 0x10ec0888 revision id 0x100202

At Mon, 06 Oct 2014 15:52:36 +0100, Greg Farrell wrote:

...
On 06/10/14 15:24, Takashi Iwai wrote:

...
Is the chip really identified as ALC888 by the driver?

Please give

...
...
alsa-info.sh output (run with --no-upload option), just

to be sure.

...
...
The same codec ID (10ec:0888) is used by various chips, so we may need to use a different thing to check the validity of alc888_coef_init() application. thanks, Takashi

It is. One other thing of note is that there is a 'SKU not

ready' error.

This message is irrelevant. It means just that the codec SSID isn't set in Realtek-compliant way.

...
I originally intended to just cut & paste enough content from the alsa-info.sh output file to show it is detected as a ALC888

chip but

...
figured that I was better giving you everything rather than

filtering

...
based on what I feel is helpful to you. Apologies for the

size of the email.

Yep, that's more helpful indeed.

I'll wait for Kailang's comment on this issue.

thanks,

Takashi

------Please consider the environment before printing this e-mail.

3729

Age (days ago)

3730

Last active (days ago)

List overview

Download

4 comments

3 participants

tags (0)

participants (3)

Greg Farrell
Kailang
Takashi Iwai