The Zaurus SL-5600 seems to have a microphone input. Otherwise all DAPM input and output pins of the wm8731 are either used in the card's DAPM routing table or are marked as not connected.

So add the microphone to the DAPM tables and set the fully_routed flag of the card instead of manually marking the unused inputs and outputs as not connected. This makes the code a bit shorter and cleaner.

Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/pxa/poodle.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-)

diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index 0fce8c4..80b457a 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -192,6 +192,7 @@ static int poodle_amp_event(struct snd_soc_dapm_widget *w, static const struct snd_soc_dapm_widget wm8731_dapm_widgets[] = { SND_SOC_DAPM_HP("Headphone Jack", NULL), SND_SOC_DAPM_SPK("Ext Spk", poodle_amp_event), +SND_SOC_DAPM_MIC("Microphone", NULL), };

/* Corgi machine connections to the codec pins */ @@ -204,6 +205,8 @@ static const struct snd_soc_dapm_route poodle_audio_map[] = { /* speaker connected to LOUT, ROUT */ {"Ext Spk", NULL, "ROUT"}, {"Ext Spk", NULL, "LOUT"}, + + {"MICIN", NULL, "Microphone"}, };

static const char *jack_function[] = {"Off", "Headphone"}; @@ -220,20 +223,6 @@ static const struct snd_kcontrol_new wm8731_poodle_controls[] = { poodle_set_spk), };

-/* - * Logic for a wm8731 as connected on a Sharp SL-C7x0 Device - */ -static int poodle_wm8731_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - - snd_soc_dapm_nc_pin(dapm, "LLINEIN"); - snd_soc_dapm_nc_pin(dapm, "RLINEIN"); - - return 0; -} - /* poodle digital audio interface glue - connects codec <--> CPU */ static struct snd_soc_dai_link poodle_dai = { .name = "WM8731", @@ -242,7 +231,6 @@ static struct snd_soc_dai_link poodle_dai = { .codec_dai_name = "wm8731-hifi", .platform_name = "pxa-pcm-audio", .codec_name = "wm8731.0-001b", - .init = poodle_wm8731_init, .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, .ops = &poodle_ops, @@ -261,6 +249,7 @@ static struct snd_soc_card poodle = { .num_dapm_widgets = ARRAY_SIZE(wm8731_dapm_widgets), .dapm_routes = poodle_audio_map, .num_dapm_routes = ARRAY_SIZE(poodle_audio_map), + .fully_routed = true, };

static int poodle_probe(struct platform_device *pdev)

Most DAPM input and output pins of the wm8750 are either used in the card's DAPM routing table or are marked as not connected. The only exceptions are the LINPUT1, RINPUT1, LINPUT2 input pins. Lets assume that those were simply overlooked and that the routing table is complete.

Set the fully_routed flag of the card instead of manually marking the unused inputs and outputs as not connected. This makes the code a bit shorter and cleaner.

Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/pxa/z2.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/sound/soc/pxa/z2.c b/sound/soc/pxa/z2.c index bcbfbe8..990b1aa 100644 --- a/sound/soc/pxa/z2.c +++ b/sound/soc/pxa/z2.c @@ -132,16 +132,8 @@ static const struct snd_soc_dapm_route z2_audio_map[] = { */ static int z2_wm8750_init(struct snd_soc_pcm_runtime *rtd) { - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; int ret;

- /* NC codec pins */ - snd_soc_dapm_disable_pin(dapm, "LINPUT3"); - snd_soc_dapm_disable_pin(dapm, "RINPUT3"); - snd_soc_dapm_disable_pin(dapm, "OUT3"); - snd_soc_dapm_disable_pin(dapm, "MONO1"); - /* Jack detection API stuff */ ret = snd_soc_card_jack_new(rtd->card, "Headset Jack", SND_JACK_HEADSET, &hs_jack, hs_jack_pins, @@ -189,6 +181,7 @@ static struct snd_soc_card snd_soc_z2 = { .num_dapm_widgets = ARRAY_SIZE(wm8750_dapm_widgets), .dapm_routes = z2_audio_map, .num_dapm_routes = ARRAY_SIZE(z2_audio_map), + .fully_routed = true, };

static struct platform_device *z2_snd_device;