Add speaker tuning initialization DSP commands, and also define previously unknown DSP command values.

Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 119 +++++++++++++++++++++++++++++++++++ 1 file changed, 119 insertions(+)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 7491e2044638..2e664aeee1c4 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -589,6 +589,60 @@ static const struct ct_eq_preset ca0132_alt_eq_presets[] = { } };

+/* + * Definitions for the DSP req's to handle speaker tuning. These all belong to + * module ID 0x96, the output effects module. + */ +enum speaker_tuning_reqs { + /* + * Currently, this value is always set to 0.0f. However, on Windows, + * when selecting certain headphone profiles on the new Sound Blaster + * connect software, the QUERY_SPEAKER_EQ_ADDRESS req on mid 0x80 is + * sent. This gets the speaker EQ address area, which is then used to + * send over (presumably) an equalizer profile for the specific + * headphone setup. It is sent using the same method the DSP + * firmware is uploaded with, which I believe is why the 'ctspeq.bin' + * file exists in linux firmware tree but goes unused. It would also + * explain why the QUERY_SPEAKER_EQ_ADDRESS req is defined but unused. + * Once this profile is sent over, SPEAKER_TUNING_USE_SPEAKER_EQ is + * set to 1.0f. + */ + SPEAKER_TUNING_USE_SPEAKER_EQ = 0x1f, + SPEAKER_TUNING_ENABLE_CENTER_EQ = 0x20, + SPEAKER_TUNING_FRONT_LEFT_VOL_LEVEL = 0x21, + SPEAKER_TUNING_FRONT_RIGHT_VOL_LEVEL = 0x22, + SPEAKER_TUNING_CENTER_VOL_LEVEL = 0x23, + SPEAKER_TUNING_LFE_VOL_LEVEL = 0x24, + SPEAKER_TUNING_REAR_LEFT_VOL_LEVEL = 0x25, + SPEAKER_TUNING_REAR_RIGHT_VOL_LEVEL = 0x26, + SPEAKER_TUNING_SURROUND_LEFT_VOL_LEVEL = 0x27, + SPEAKER_TUNING_SURROUND_RIGHT_VOL_LEVEL = 0x28, + /* + * Inversion is used when setting headphone virtualization to line + * out. Not sure why this is, but it's the only place it's ever used. + */ + SPEAKER_TUNING_FRONT_LEFT_INVERT = 0x29, + SPEAKER_TUNING_FRONT_RIGHT_INVERT = 0x2a, + SPEAKER_TUNING_CENTER_INVERT = 0x2b, + SPEAKER_TUNING_LFE_INVERT = 0x2c, + SPEAKER_TUNING_REAR_LEFT_INVERT = 0x2d, + SPEAKER_TUNING_REAR_RIGHT_INVERT = 0x2e, + SPEAKER_TUNING_SURROUND_LEFT_INVERT = 0x2f, + SPEAKER_TUNING_SURROUND_RIGHT_INVERT = 0x30, + /* Delay is used when setting surround speaker distance in Windows. */ + SPEAKER_TUNING_FRONT_LEFT_DELAY = 0x31, + SPEAKER_TUNING_FRONT_RIGHT_DELAY = 0x32, + SPEAKER_TUNING_CENTER_DELAY = 0x33, + SPEAKER_TUNING_LFE_DELAY = 0x34, + SPEAKER_TUNING_REAR_LEFT_DELAY = 0x35, + SPEAKER_TUNING_REAR_RIGHT_DELAY = 0x36, + SPEAKER_TUNING_SURROUND_LEFT_DELAY = 0x37, + SPEAKER_TUNING_SURROUND_RIGHT_DELAY = 0x38, + /* Of these two, only mute seems to ever be used. */ + SPEAKER_TUNING_MAIN_VOLUME = 0x39, + SPEAKER_TUNING_MUTE = 0x3a, +}; + /* DSP command sequences for ca0132_alt_select_out */ #define ALT_OUT_SET_MAX_COMMANDS 9 /* Max number of commands in sequence */ struct ca0132_alt_out_set { @@ -6874,6 +6928,67 @@ static void ca0132_refresh_widget_caps(struct hda_codec *codec) } }

+/* + * Default speaker tuning values setup for alternative codecs. + */ +static const unsigned int sbz_default_delay_values[] = { + /* Non-zero values are floating point 0.000198. */ + 0x394f9e38, 0x394f9e38, 0x00000000, 0x00000000, 0x00000000, 0x00000000 +}; + +static const unsigned int zxr_default_delay_values[] = { + /* Non-zero values are floating point 0.000220. */ + 0x00000000, 0x00000000, 0x3966afcd, 0x3966afcd, 0x3966afcd, 0x3966afcd +}; + +static const unsigned int ae5_default_delay_values[] = { + /* Non-zero values are floating point 0.000100. */ + 0x00000000, 0x00000000, 0x38d1b717, 0x38d1b717, 0x38d1b717, 0x38d1b717 +}; + +/* + * If we never change these, probably only need them on initialization. + */ +static void ca0132_alt_init_speaker_tuning(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int i, tmp, start_req, end_req; + const unsigned int *values; + + switch (ca0132_quirk(spec)) { + case QUIRK_SBZ: + values = sbz_default_delay_values; + break; + case QUIRK_ZXR: + values = zxr_default_delay_values; + break; + case QUIRK_AE5: + values = ae5_default_delay_values; + break; + default: + values = sbz_default_delay_values; + break; + } + + tmp = FLOAT_ZERO; + dspio_set_uint_param(codec, 0x96, SPEAKER_TUNING_ENABLE_CENTER_EQ, tmp); + + start_req = SPEAKER_TUNING_FRONT_LEFT_VOL_LEVEL; + end_req = SPEAKER_TUNING_REAR_RIGHT_VOL_LEVEL; + for (i = start_req; i < end_req + 1; i++) + dspio_set_uint_param(codec, 0x96, i, tmp); + + start_req = SPEAKER_TUNING_FRONT_LEFT_INVERT; + end_req = SPEAKER_TUNING_REAR_RIGHT_INVERT; + for (i = start_req; i < end_req + 1; i++) + dspio_set_uint_param(codec, 0x96, i, tmp); + + + for (i = 0; i < 6; i++) + dspio_set_uint_param(codec, 0x96, + SPEAKER_TUNING_FRONT_LEFT_DELAY + i, values[i]); +} + /* * Creates a dummy stream to bind the output to. This seems to have to be done * after changing the main outputs source and destination streams. @@ -7373,6 +7488,8 @@ static void sbz_setup_defaults(struct hda_codec *codec) } }

+ ca0132_alt_init_speaker_tuning(codec); + ca0132_alt_create_dummy_stream(codec); }

@@ -7440,6 +7557,8 @@ static void ae5_setup_defaults(struct hda_codec *codec) } }

+ ca0132_alt_init_speaker_tuning(codec); + ca0132_alt_create_dummy_stream(codec); }

Add bass redirection controls for surround outputs. This uses the DSP to redirect audio below the bass redirection crossover frequency to the LFE channel from the front/rear L/R speakers. This only goes into effect if the speakers aren't set as full range, and only if the surround configuration has an LFE channel.

Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 130 +++++++++++++++++++++++++++++++++-- 1 file changed, 126 insertions(+), 4 deletions(-)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index c9cd4fc218fe..d97358406401 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -149,6 +149,8 @@ enum { SPEAKER_CHANNEL_CFG_ENUM, SPEAKER_FULL_RANGE_FRONT, SPEAKER_FULL_RANGE_REAR, + BASS_REDIRECTION, + BASS_REDIRECTION_XOVER, #define EFFECTS_COUNT (EFFECT_END_NID - EFFECT_START_NID) };

@@ -1123,6 +1125,8 @@ struct ca0132_spec { unsigned char speaker_range_val[2]; unsigned char mic_boost_enum_val; unsigned char smart_volume_setting; + unsigned char bass_redirection_val; + long bass_redirect_xover_freq; long fx_ctl_val[EFFECT_LEVEL_SLIDERS]; long xbass_xover_freq; long eq_preset_val; @@ -4324,6 +4328,35 @@ static int ca0132_alt_set_full_range_speaker(struct hda_codec *codec) return 0; }

+static int ca0132_alt_surround_set_bass_redirection(struct hda_codec *codec, + bool val) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int tmp; + int err; + + if (val && spec->channel_cfg_val != SPEAKER_CHANNELS_4_0 && + spec->channel_cfg_val != SPEAKER_CHANNELS_2_0) + tmp = FLOAT_ONE; + else + tmp = FLOAT_ZERO; + + err = dspio_set_uint_param(codec, 0x96, SPEAKER_BASS_REDIRECT, tmp); + if (err < 0) + return err; + + /* If it is enabled, make sure to set the crossover frequency. */ + if (tmp) { + tmp = float_xbass_xover_lookup[spec->xbass_xover_freq]; + err = dspio_set_uint_param(codec, 0x96, + SPEAKER_BASS_REDIRECT_XOVER_FREQ, tmp); + if (err < 0) + return err; + } + + return 0; +} + /* * These are the commands needed to setup output on each of the different card * types. @@ -4593,6 +4626,15 @@ static int ca0132_alt_select_out(struct hda_codec *codec) ca0132_effects_set(codec, X_BASS, spec->effects_switch[X_BASS - EFFECT_START_NID]);

+ if (spec->cur_out_type == SURROUND_OUT) + err = ca0132_alt_surround_set_bass_redirection(codec, + spec->bass_redirection_val); + else + err = ca0132_alt_surround_set_bass_redirection(codec, 0); + + if (err < 0) + goto exit; + /* run through the output dsp commands for the selected output. */ for (i = 0; i < alt_out_presets[spec->cur_out_type].commands; i++) { err = dspio_set_uint_param(codec, @@ -5282,6 +5324,18 @@ static int ca0132_vnode_switch_set(struct snd_kcontrol *kcontrol, return ret; } /* End of control change helpers. */ + +static void ca0132_alt_bass_redirection_xover_set(struct hda_codec *codec, + long idx) +{ + snd_hda_power_up(codec); + + dspio_set_param(codec, 0x96, 0x20, SPEAKER_BASS_REDIRECT_XOVER_FREQ, + &(float_xbass_xover_lookup[idx]), sizeof(unsigned int)); + + snd_hda_power_down(codec); +} + /* * Below I've added controls to mess with the effect levels, I've only enabled * them on the Sound Blaster Z, but they would probably also work on the @@ -5290,6 +5344,7 @@ static int ca0132_vnode_switch_set(struct snd_kcontrol *kcontrol, */

/* Sets DSP effect level from the sliders above the controls */ + static int ca0132_alt_slider_ctl_set(struct hda_codec *codec, hda_nid_t nid, const unsigned int *lookup, int idx) { @@ -5335,8 +5390,12 @@ static int ca0132_alt_xbass_xover_slider_ctl_get(struct snd_kcontrol *kcontrol, struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct ca0132_spec *spec = codec->spec; long *valp = ucontrol->value.integer.value; + hda_nid_t nid = get_amp_nid(kcontrol);

- *valp = spec->xbass_xover_freq; + if (nid == BASS_REDIRECTION_XOVER) + *valp = spec->bass_redirect_xover_freq; + else + *valp = spec->xbass_xover_freq;

return 0; } @@ -5391,16 +5450,25 @@ static int ca0132_alt_xbass_xover_slider_put(struct snd_kcontrol *kcontrol, struct ca0132_spec *spec = codec->spec; hda_nid_t nid = get_amp_nid(kcontrol); long *valp = ucontrol->value.integer.value; + long *cur_val; int idx;

+ if (nid == BASS_REDIRECTION_XOVER) + cur_val = &spec->bass_redirect_xover_freq; + else + cur_val = &spec->xbass_xover_freq; + /* any change? */ - if (spec->xbass_xover_freq == *valp) + if (*cur_val == *valp) return 0;

- spec->xbass_xover_freq = *valp; + *cur_val = *valp;

idx = *valp; - ca0132_alt_slider_ctl_set(codec, nid, float_xbass_xover_lookup, idx); + if (nid == BASS_REDIRECTION_XOVER) + ca0132_alt_bass_redirection_xover_set(codec, *cur_val); + else + ca0132_alt_slider_ctl_set(codec, nid, float_xbass_xover_lookup, idx);

return 0; } @@ -5968,6 +6036,11 @@ static int ca0132_switch_get(struct snd_kcontrol *kcontrol, return 0; }

+ if (nid == BASS_REDIRECTION) { + *valp = spec->bass_redirection_val; + return 0; + } + return 0; }

@@ -6054,6 +6127,14 @@ static int ca0132_switch_put(struct snd_kcontrol *kcontrol, changed = 0; }

+ if (nid == BASS_REDIRECTION) { + spec->bass_redirection_val = *valp; + if (spec->cur_out_type == SURROUND_OUT) + ca0132_alt_surround_set_bass_redirection(codec, *valp); + + changed = 0; + } + exit: snd_hda_power_down(codec); return changed; @@ -6436,6 +6517,39 @@ static int ca0132_alt_add_rear_full_range_switch(struct hda_codec *codec) snd_ctl_new1(&knew, codec)); }

+/* + * Bass redirection redirects audio below the crossover frequency to the LFE + * channel on speakers that are set as not being full-range. On configurations + * without an LFE channel, it does nothing. Bass redirection seems to be the + * replacement for X-Bass on configurations with an LFE channel. + */ +static int ca0132_alt_add_bass_redirection_crossover(struct hda_codec *codec) +{ + const char *namestr = "Output: Bass Redirection Playback Volume"; + struct snd_kcontrol_new knew = + HDA_CODEC_VOLUME_MONO(namestr, BASS_REDIRECTION_XOVER, 1, 0, + HDA_OUTPUT); + + knew.tlv.c = NULL; + knew.info = ca0132_alt_xbass_xover_slider_info; + knew.get = ca0132_alt_xbass_xover_slider_ctl_get; + knew.put = ca0132_alt_xbass_xover_slider_put; + + return snd_hda_ctl_add(codec, BASS_REDIRECTION_XOVER, + snd_ctl_new1(&knew, codec)); +} + +static int ca0132_alt_add_bass_redirection_switch(struct hda_codec *codec) +{ + const char *namestr = "Output: Bass Redirection Playback Switch"; + struct snd_kcontrol_new knew = + CA0132_CODEC_MUTE_MONO(namestr, BASS_REDIRECTION, 1, + HDA_OUTPUT); + + return snd_hda_ctl_add(codec, BASS_REDIRECTION, + snd_ctl_new1(&knew, codec)); +} + /* * Create an Input Source enumerated control for the alternate ca0132 codecs * because the front microphone has no auto-detect, and Line-in has to be set @@ -6749,6 +6863,12 @@ static int ca0132_build_controls(struct hda_codec *codec) if (err < 0) return err; err = ca0132_alt_add_rear_full_range_switch(codec); + if (err < 0) + return err; + err = ca0132_alt_add_bass_redirection_crossover(codec); + if (err < 0) + return err; + err = ca0132_alt_add_bass_redirection_switch(codec); if (err < 0) return err; err = ca0132_alt_add_mic_boost_enum(codec); @@ -8102,6 +8222,8 @@ static void ca0132_init_chip(struct hda_codec *codec) spec->xbass_xover_freq = 8; for (i = 0; i < EFFECT_LEVEL_SLIDERS; i++) spec->fx_ctl_val[i] = effect_slider_defaults[i]; + + spec->bass_redirect_xover_freq = 8; }

spec->voicefx_val = 0;

Remove the surround output selection and merge it with the speaker output selection. Now that the extra commands that were being run on surround output setting are known, there's no need to have it be separate.

Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 151 +++++++++++------------------------ 1 file changed, 46 insertions(+), 105 deletions(-)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index d97358406401..f0fa1e8f41da 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -82,11 +82,10 @@ MODULE_FIRMWARE(R3DI_EFX_FILE);

static const char *const dirstr[2] = { "Playback", "Capture" };

-#define NUM_OF_OUTPUTS 3 +#define NUM_OF_OUTPUTS 2 enum { SPEAKER_OUT, HEADPHONE_OUT, - SURROUND_OUT };

enum { @@ -699,16 +698,6 @@ static const struct ca0132_alt_out_set alt_out_presets[] = { 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { .name = "Surround", - .commands = 8, - .mids = { 0x96, 0x8F, 0x96, 0x96, - 0x96, 0x96, 0x96, 0x96 }, - .reqs = { 0x18, 0x01, 0x1F, 0x15, - 0x3A, 0x1A, 0x1B, 0x1C }, - .vals = { 0x00000000, 0x00000000, 0x00000000, - 0x00000000, 0x00000000, 0x00000000, - 0x00000000, 0x00000000 } - } };

/* Surround output channel count configuration structures. */ @@ -785,10 +774,6 @@ static const struct ae5_ca0113_output_set ae5_ca0113_output_presets[] = { { .group = { 0x30, 0x30, 0x48, 0x48, 0x48, 0x30 }, .target = { 0x2e, 0x30, 0x0d, 0x17, 0x19, 0x32 }, .vals = { 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x00 } - }, - { .group = { 0x30, 0x30, 0x48, 0x48, 0x48, 0x30 }, - .target = { 0x2e, 0x30, 0x0d, 0x17, 0x19, 0x32 }, - .vals = { 0x00, 0x00, 0x40, 0x00, 0x00, 0x3f } } };

@@ -4440,42 +4425,6 @@ static void ca0132_alt_select_out_quirk_handler(struct hda_codec *codec) break; } break; - case SURROUND_OUT: - switch (ca0132_quirk(spec)) { - case QUIRK_SBZ: - ca0113_mmio_gpio_set(codec, 7, false); - ca0113_mmio_gpio_set(codec, 4, true); - ca0113_mmio_gpio_set(codec, 1, true); - chipio_set_control_param(codec, 0x0d, 0x18); - break; - case QUIRK_ZXR: - ca0113_mmio_gpio_set(codec, 2, true); - ca0113_mmio_gpio_set(codec, 3, true); - ca0113_mmio_gpio_set(codec, 5, false); - zxr_headphone_gain_set(codec, 0); - chipio_set_control_param(codec, 0x0d, 0x24); - break; - case QUIRK_R3DI: - chipio_set_control_param(codec, 0x0d, 0x24); - r3di_gpio_out_set(codec, R3DI_LINE_OUT); - break; - case QUIRK_R3D: - ca0113_mmio_gpio_set(codec, 1, true); - chipio_set_control_param(codec, 0x0d, 0x24); - break; - case QUIRK_AE5: - ae5_mmio_select_out(codec); - ae5_headphone_gain_set(codec, 2); - tmp = FLOAT_ZERO; - dspio_set_uint_param(codec, 0x96, 0x29, tmp); - dspio_set_uint_param(codec, 0x96, 0x2a, tmp); - chipio_set_control_param(codec, 0x0d, 0xa4); - chipio_write(codec, 0x18b03c, 0x00000012); - break; - default: - break; - } - break; } }

@@ -4492,11 +4441,10 @@ static void ca0132_alt_select_out_quirk_handler(struct hda_codec *codec) static int ca0132_alt_select_out(struct hda_codec *codec) { struct ca0132_spec *spec = codec->spec; + unsigned int tmp, outfx_set, i; unsigned int pin_ctl; int jack_present; int auto_jack; - unsigned int i; - unsigned int tmp; int err; /* Default Headphone is rear headphone */ hda_nid_t headphone_nid = spec->out_pins[1]; @@ -4523,6 +4471,8 @@ static int ca0132_alt_select_out(struct hda_codec *codec) } else spec->cur_out_type = spec->out_enum_val;

+ outfx_set = spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]; + /* Begin DSP output switch */ tmp = FLOAT_ONE; err = dspio_set_uint_param(codec, 0x96, 0x3A, tmp); @@ -4536,6 +4486,7 @@ static int ca0132_alt_select_out(struct hda_codec *codec) codec_dbg(codec, "%s speaker\n", __func__);

/* disable headphone node */ + pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0); snd_hda_set_pin_ctl(codec, spec->out_pins[1], @@ -4549,15 +4500,34 @@ static int ca0132_alt_select_out(struct hda_codec *codec) snd_hda_codec_write(codec, spec->out_pins[0], 0, AC_VERB_SET_EAPD_BTLENABLE, 0x01);

- /* If PlayEnhancement is enabled, set different source */ - if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) - dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ONE); + /* enable center/lfe out node */ + pin_ctl = snd_hda_codec_read(codec, spec->out_pins[2], 0, + AC_VERB_GET_PIN_WIDGET_CONTROL, 0); + snd_hda_set_pin_ctl(codec, spec->out_pins[2], + pin_ctl | PIN_OUT); + /* Now set rear surround node as out. */ + pin_ctl = snd_hda_codec_read(codec, spec->out_pins[3], 0, + AC_VERB_GET_PIN_WIDGET_CONTROL, 0); + snd_hda_set_pin_ctl(codec, spec->out_pins[3], + pin_ctl | PIN_OUT); + + /* + * Without PlayEnhancement being enabled, if we've got a 2.0 + * setup, set it to floating point eight to disable any DSP + * processing effects. + */ + if (!outfx_set && spec->channel_cfg_val == SPEAKER_CHANNELS_2_0) + tmp = FLOAT_EIGHT; else - dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_EIGHT); + tmp = speaker_channel_cfgs[spec->channel_cfg_val].val; + + err = dspio_set_uint_param(codec, 0x80, 0x04, tmp); + if (err < 0) + goto exit; + break; case HEADPHONE_OUT: codec_dbg(codec, "%s hp\n", __func__); - snd_hda_codec_write(codec, spec->out_pins[0], 0, AC_VERB_SET_EAPD_BTLENABLE, 0x00);

@@ -4568,7 +4538,6 @@ static int ca0132_alt_select_out(struct hda_codec *codec) pin_ctl & ~PIN_HP);

/* enable headphone, either front or rear */ - if (snd_hda_jack_detect(codec, spec->unsol_tag_front_hp)) headphone_nid = spec->out_pins[2]; else if (snd_hda_jack_detect(codec, spec->unsol_tag_hp)) @@ -4579,54 +4548,22 @@ static int ca0132_alt_select_out(struct hda_codec *codec) snd_hda_set_pin_ctl(codec, headphone_nid, pin_ctl | PIN_HP);

- if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) + if (outfx_set) dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ONE); else dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ZERO); break; - case SURROUND_OUT: - codec_dbg(codec, "%s surround\n", __func__); - - /* enable line out node */ - pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0, - AC_VERB_GET_PIN_WIDGET_CONTROL, 0); - snd_hda_set_pin_ctl(codec, spec->out_pins[0], - pin_ctl | PIN_OUT); - /* Disable headphone out */ - pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0, - AC_VERB_GET_PIN_WIDGET_CONTROL, 0); - snd_hda_set_pin_ctl(codec, spec->out_pins[1], - pin_ctl & ~PIN_HP); - /* Enable EAPD on line out */ - snd_hda_codec_write(codec, spec->out_pins[0], 0, - AC_VERB_SET_EAPD_BTLENABLE, 0x01); - /* enable center/lfe out node */ - pin_ctl = snd_hda_codec_read(codec, spec->out_pins[2], 0, - AC_VERB_GET_PIN_WIDGET_CONTROL, 0); - snd_hda_set_pin_ctl(codec, spec->out_pins[2], - pin_ctl | PIN_OUT); - /* Now set rear surround node as out. */ - pin_ctl = snd_hda_codec_read(codec, spec->out_pins[3], 0, - AC_VERB_GET_PIN_WIDGET_CONTROL, 0); - snd_hda_set_pin_ctl(codec, spec->out_pins[3], - pin_ctl | PIN_OUT); - - tmp = speaker_channel_cfgs[spec->channel_cfg_val].val; - dspio_set_uint_param(codec, 0x80, 0x04, tmp); - break; } /* - * Surround always sets it's scp command to req 0x04 to FLOAT_EIGHT. - * With this set though, X_BASS cannot be enabled. So, if we have OutFX - * enabled, we need to make sure X_BASS is off, otherwise everything - * sounds all muffled. Running ca0132_effects_set with X_BASS as the - * effect should sort this out. + * If output effects are enabled, set the X-Bass effect value again to + * make sure that it's properly enabled/disabled for speaker + * configurations with an LFE channel. */ - if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) + if (outfx_set) ca0132_effects_set(codec, X_BASS, spec->effects_switch[X_BASS - EFFECT_START_NID]);

- if (spec->cur_out_type == SURROUND_OUT) + if (spec->cur_out_type == SPEAKER_OUT) err = ca0132_alt_surround_set_bass_redirection(codec, spec->bass_redirection_val); else @@ -4646,7 +4583,7 @@ static int ca0132_alt_select_out(struct hda_codec *codec) goto exit; }

- if (spec->cur_out_type == SURROUND_OUT) + if (spec->cur_out_type == SPEAKER_OUT) err = ca0132_alt_set_full_range_speaker(codec);

exit: @@ -5054,7 +4991,7 @@ static int ca0132_voicefx_set(struct hda_codec *codec, int enable) static int ca0132_effects_set(struct hda_codec *codec, hda_nid_t nid, long val) { struct ca0132_spec *spec = codec->spec; - unsigned int on, tmp; + unsigned int on, tmp, channel_cfg; int num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT; int err = 0; int idx = nid - EFFECT_START_NID; @@ -5067,8 +5004,12 @@ static int ca0132_effects_set(struct hda_codec *codec, hda_nid_t nid, long val) /* if PE if off, turn off out effects. */ if (!spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) val = 0; - if (spec->cur_out_type == SURROUND_OUT && nid == X_BASS) - val = 0; + if (spec->cur_out_type == SPEAKER_OUT && nid == X_BASS) { + channel_cfg = spec->channel_cfg_val; + if (channel_cfg != SPEAKER_CHANNELS_2_0 && + channel_cfg != SPEAKER_CHANNELS_4_0) + val = 0; + } }

/* for in effect, qualify with CrystalVoice */ @@ -5799,7 +5740,7 @@ static int ca0132_alt_speaker_channel_cfg_put(struct snd_kcontrol *kcontrol,

spec->channel_cfg_val = sel;

- if (spec->out_enum_val == SURROUND_OUT) + if (spec->out_enum_val == SPEAKER_OUT) ca0132_alt_select_out(codec);

return 1; @@ -6121,7 +6062,7 @@ static int ca0132_switch_put(struct snd_kcontrol *kcontrol,

if (nid == SPEAKER_FULL_RANGE_FRONT || nid == SPEAKER_FULL_RANGE_REAR) { spec->speaker_range_val[nid - SPEAKER_FULL_RANGE_FRONT] = *valp; - if (spec->cur_out_type == SURROUND_OUT) + if (spec->cur_out_type == SPEAKER_OUT) ca0132_alt_set_full_range_speaker(codec);

changed = 0; @@ -6129,7 +6070,7 @@ static int ca0132_switch_put(struct snd_kcontrol *kcontrol,

if (nid == BASS_REDIRECTION) { spec->bass_redirection_val = *valp; - if (spec->cur_out_type == SURROUND_OUT) + if (spec->cur_out_type == SPEAKER_OUT) ca0132_alt_surround_set_bass_redirection(codec, *valp);

changed = 0;

Add structures containing the changes that need to happen on output selection for each quirk. This should streamline the addition of new quirks.

Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 336 +++++++++++++++++++++++++---------- 1 file changed, 241 insertions(+), 95 deletions(-)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index ee25265ab600..ac9dcaf69a2e 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -1256,6 +1256,164 @@ static const struct snd_pci_quirk ca0132_quirks[] = { {} };

+/* Output selection quirk info structures. */ +#define MAX_QUIRK_MMIO_GPIO_SET_VALS 3 +#define MAX_QUIRK_SCP_SET_VALS 2 +struct ca0132_alt_out_set_info { + unsigned int dac2port; /* ParamID 0x0d value. */ + + bool has_hda_gpio; + char hda_gpio_pin; + char hda_gpio_set; + + unsigned int mmio_gpio_count; + char mmio_gpio_pin[MAX_QUIRK_MMIO_GPIO_SET_VALS]; + char mmio_gpio_set[MAX_QUIRK_MMIO_GPIO_SET_VALS]; + + unsigned int scp_cmds_count; + unsigned int scp_cmd_mid[MAX_QUIRK_SCP_SET_VALS]; + unsigned int scp_cmd_req[MAX_QUIRK_SCP_SET_VALS]; + unsigned int scp_cmd_val[MAX_QUIRK_SCP_SET_VALS]; + + bool has_chipio_write; + unsigned int chipio_write_addr; + unsigned int chipio_write_data; +}; + +struct ca0132_alt_out_set_quirk_data { + int quirk_id; + + bool has_headphone_gain; + bool is_ae_series; + + struct ca0132_alt_out_set_info out_set_info[NUM_OF_OUTPUTS]; +}; + +static const struct ca0132_alt_out_set_quirk_data quirk_out_set_data[] = { + { .quirk_id = QUIRK_R3DI, + .has_headphone_gain = false, + .is_ae_series = false, + .out_set_info = { + /* Speakers. */ + { .dac2port = 0x24, + .has_hda_gpio = true, + .hda_gpio_pin = 2, + .hda_gpio_set = 1, + .mmio_gpio_count = 0, + .scp_cmds_count = 0, + .has_chipio_write = false, + }, + /* Headphones. */ + { .dac2port = 0x21, + .has_hda_gpio = true, + .hda_gpio_pin = 2, + .hda_gpio_set = 0, + .mmio_gpio_count = 0, + .scp_cmds_count = 0, + .has_chipio_write = false, + } }, + }, + { .quirk_id = QUIRK_R3D, + .has_headphone_gain = false, + .is_ae_series = false, + .out_set_info = { + /* Speakers. */ + { .dac2port = 0x24, + .has_hda_gpio = false, + .mmio_gpio_count = 1, + .mmio_gpio_pin = { 1 }, + .mmio_gpio_set = { 1 }, + .scp_cmds_count = 0, + .has_chipio_write = false, + }, + /* Headphones. */ + { .dac2port = 0x21, + .has_hda_gpio = false, + .mmio_gpio_count = 1, + .mmio_gpio_pin = { 1 }, + .mmio_gpio_set = { 0 }, + .scp_cmds_count = 0, + .has_chipio_write = false, + } }, + }, + { .quirk_id = QUIRK_SBZ, + .has_headphone_gain = false, + .is_ae_series = false, + .out_set_info = { + /* Speakers. */ + { .dac2port = 0x18, + .has_hda_gpio = false, + .mmio_gpio_count = 3, + .mmio_gpio_pin = { 7, 4, 1 }, + .mmio_gpio_set = { 0, 1, 1 }, + .scp_cmds_count = 0, + .has_chipio_write = false, }, + /* Headphones. */ + { .dac2port = 0x12, + .has_hda_gpio = false, + .mmio_gpio_count = 3, + .mmio_gpio_pin = { 7, 4, 1 }, + .mmio_gpio_set = { 1, 1, 0 }, + .scp_cmds_count = 0, + .has_chipio_write = false, + } }, + }, + { .quirk_id = QUIRK_ZXR, + .has_headphone_gain = true, + .is_ae_series = false, + .out_set_info = { + /* Speakers. */ + { .dac2port = 0x24, + .has_hda_gpio = false, + .mmio_gpio_count = 3, + .mmio_gpio_pin = { 2, 3, 5 }, + .mmio_gpio_set = { 1, 1, 0 }, + .scp_cmds_count = 0, + .has_chipio_write = false, + }, + /* Headphones. */ + { .dac2port = 0x21, + .has_hda_gpio = false, + .mmio_gpio_count = 3, + .mmio_gpio_pin = { 2, 3, 5 }, + .mmio_gpio_set = { 0, 1, 1 }, + .scp_cmds_count = 0, + .has_chipio_write = false, + } }, + }, + { .quirk_id = QUIRK_AE5, + .has_headphone_gain = true, + .is_ae_series = true, + .out_set_info = { + /* Speakers. */ + { .dac2port = 0xa4, + .has_hda_gpio = false, + .mmio_gpio_count = 0, + .scp_cmds_count = 2, + .scp_cmd_mid = { 0x96, 0x96 }, + .scp_cmd_req = { SPEAKER_TUNING_FRONT_LEFT_INVERT, + SPEAKER_TUNING_FRONT_RIGHT_INVERT }, + .scp_cmd_val = { FLOAT_ZERO, FLOAT_ZERO }, + .has_chipio_write = true, + .chipio_write_addr = 0x0018b03c, + .chipio_write_data = 0x00000012 + }, + /* Headphones. */ + { .dac2port = 0xa1, + .has_hda_gpio = false, + .mmio_gpio_count = 0, + .scp_cmds_count = 2, + .scp_cmd_mid = { 0x96, 0x96 }, + .scp_cmd_req = { SPEAKER_TUNING_FRONT_LEFT_INVERT, + SPEAKER_TUNING_FRONT_RIGHT_INVERT }, + .scp_cmd_val = { FLOAT_ONE, FLOAT_ONE }, + .has_chipio_write = true, + .chipio_write_addr = 0x0018b03c, + .chipio_write_data = 0x00000012 + } }, + } +}; + /* * CA0132 codec access */ @@ -3513,26 +3671,6 @@ static void r3di_gpio_mic_set(struct hda_codec *codec, AC_VERB_SET_GPIO_DATA, cur_gpio); }

-static void r3di_gpio_out_set(struct hda_codec *codec, - enum r3di_out_select cur_out) -{ - unsigned int cur_gpio; - - /* Get the current GPIO Data setup */ - cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0); - - switch (cur_out) { - case R3DI_HEADPHONE_OUT: - cur_gpio &= ~(1 << R3DI_OUT_SELECT_BIT); - break; - case R3DI_LINE_OUT: - cur_gpio |= (1 << R3DI_OUT_SELECT_BIT); - break; - } - snd_hda_codec_write(codec, codec->core.afg, 0, - AC_VERB_SET_GPIO_DATA, cur_gpio); -} - static void r3di_gpio_dsp_status_set(struct hda_codec *codec, enum r3di_dsp_status dsp_status) { @@ -4314,86 +4452,93 @@ static int ca0132_alt_surround_set_bass_redirection(struct hda_codec *codec, * These are the commands needed to setup output on each of the different card * types. */ -static void ca0132_alt_select_out_quirk_handler(struct hda_codec *codec) +static void ca0132_alt_select_out_get_quirk_data(struct hda_codec *codec, + const struct ca0132_alt_out_set_quirk_data **quirk_data) { struct ca0132_spec *spec = codec->spec; - unsigned int tmp; + int quirk = ca0132_quirk(spec); + unsigned int i;

- switch (spec->cur_out_type) { - case SPEAKER_OUT: - switch (ca0132_quirk(spec)) { - case QUIRK_SBZ: - ca0113_mmio_gpio_set(codec, 7, false); - ca0113_mmio_gpio_set(codec, 4, true); - ca0113_mmio_gpio_set(codec, 1, true); - chipio_set_control_param(codec, 0x0d, 0x18); - break; - case QUIRK_ZXR: - ca0113_mmio_gpio_set(codec, 2, true); - ca0113_mmio_gpio_set(codec, 3, true); - ca0113_mmio_gpio_set(codec, 5, false); - zxr_headphone_gain_set(codec, 0); - chipio_set_control_param(codec, 0x0d, 0x24); - break; - case QUIRK_R3DI: - chipio_set_control_param(codec, 0x0d, 0x24); - r3di_gpio_out_set(codec, R3DI_LINE_OUT); - break; - case QUIRK_R3D: - chipio_set_control_param(codec, 0x0d, 0x24); - ca0113_mmio_gpio_set(codec, 1, true); - break; - case QUIRK_AE5: - ae5_mmio_select_out(codec); - ae5_headphone_gain_set(codec, 2); - tmp = FLOAT_ZERO; - dspio_set_uint_param(codec, 0x96, 0x29, tmp); - dspio_set_uint_param(codec, 0x96, 0x2a, tmp); - chipio_set_control_param(codec, 0x0d, 0xa4); - chipio_write(codec, 0x18b03c, 0x00000012); - break; - default: - break; + *quirk_data = NULL; + for (i = 0; i < ARRAY_SIZE(quirk_out_set_data); i++) { + if (quirk_out_set_data[i].quirk_id == quirk) { + *quirk_data = &quirk_out_set_data[i]; + return; } - break; - case HEADPHONE_OUT: - switch (ca0132_quirk(spec)) { - case QUIRK_SBZ: - ca0113_mmio_gpio_set(codec, 7, true); - ca0113_mmio_gpio_set(codec, 4, true); - ca0113_mmio_gpio_set(codec, 1, false); - chipio_set_control_param(codec, 0x0d, 0x12); - break; - case QUIRK_ZXR: - ca0113_mmio_gpio_set(codec, 2, false); - ca0113_mmio_gpio_set(codec, 3, false); - ca0113_mmio_gpio_set(codec, 5, true); - zxr_headphone_gain_set(codec, spec->zxr_gain_set); - chipio_set_control_param(codec, 0x0d, 0x21); - break; - case QUIRK_R3DI: - chipio_set_control_param(codec, 0x0d, 0x21); - r3di_gpio_out_set(codec, R3DI_HEADPHONE_OUT); - break; - case QUIRK_R3D: - chipio_set_control_param(codec, 0x0d, 0x21); - ca0113_mmio_gpio_set(codec, 0x1, false); - break; - case QUIRK_AE5: - ae5_mmio_select_out(codec); - ae5_headphone_gain_set(codec, - spec->ae5_headphone_gain_val); - tmp = FLOAT_ONE; - dspio_set_uint_param(codec, 0x96, 0x29, tmp); - dspio_set_uint_param(codec, 0x96, 0x2a, tmp); - chipio_set_control_param(codec, 0x0d, 0xa1); - chipio_write(codec, 0x18b03c, 0x00000012); - break; - default: - break; + } +} + +static int ca0132_alt_select_out_quirk_set(struct hda_codec *codec) +{ + const struct ca0132_alt_out_set_quirk_data *quirk_data; + const struct ca0132_alt_out_set_info *out_info; + struct ca0132_spec *spec = codec->spec; + unsigned int i, gpio_data; + int err; + + ca0132_alt_select_out_get_quirk_data(codec, &quirk_data); + if (!quirk_data) + return 0; + + out_info = &quirk_data->out_set_info[spec->cur_out_type]; + if (quirk_data->is_ae_series) + ae5_mmio_select_out(codec); + + if (out_info->has_hda_gpio) { + gpio_data = snd_hda_codec_read(codec, codec->core.afg, 0, + AC_VERB_GET_GPIO_DATA, 0); + + if (out_info->hda_gpio_set) + gpio_data |= (1 << out_info->hda_gpio_pin); + else + gpio_data &= ~(1 << out_info->hda_gpio_pin); + + snd_hda_codec_write(codec, codec->core.afg, 0, + AC_VERB_SET_GPIO_DATA, gpio_data); + } + + if (out_info->mmio_gpio_count) { + for (i = 0; i < out_info->mmio_gpio_count; i++) { + ca0113_mmio_gpio_set(codec, out_info->mmio_gpio_pin[i], + out_info->mmio_gpio_set[i]); } - break; } + + if (out_info->scp_cmds_count) { + for (i = 0; i < out_info->scp_cmds_count; i++) { + err = dspio_set_uint_param(codec, + out_info->scp_cmd_mid[i], + out_info->scp_cmd_req[i], + out_info->scp_cmd_val[i]); + if (err < 0) + return err; + } + } + + chipio_set_control_param(codec, 0x0d, out_info->dac2port); + + if (out_info->has_chipio_write) { + chipio_write(codec, out_info->chipio_write_addr, + out_info->chipio_write_data); + } + + if (quirk_data->has_headphone_gain) { + if (spec->cur_out_type != HEADPHONE_OUT) { + if (quirk_data->is_ae_series) + ae5_headphone_gain_set(codec, 2); + else + zxr_headphone_gain_set(codec, 0); + } else { + if (quirk_data->is_ae_series) + ae5_headphone_gain_set(codec, + spec->ae5_headphone_gain_val); + else + zxr_headphone_gain_set(codec, + spec->zxr_gain_set); + } + } + + return 0; }

static void ca0132_set_out_node_pincfg(struct hda_codec *codec, hda_nid_t nid, @@ -4456,7 +4601,8 @@ static int ca0132_alt_select_out(struct hda_codec *codec) if (err < 0) goto exit;

- ca0132_alt_select_out_quirk_handler(codec); + if (ca0132_alt_select_out_quirk_set(codec) < 0) + goto exit;

switch (spec->cur_out_type) { case SPEAKER_OUT:

Add a new PCI subsystem ID for the SoundBlaster AE-7 card.

Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 9c61a10114aa..57cb63ea88e6 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -1134,6 +1134,7 @@ enum { QUIRK_R3DI, QUIRK_R3D, QUIRK_AE5, + QUIRK_AE7, };

#ifdef CONFIG_PCI @@ -1253,6 +1254,7 @@ static const struct snd_pci_quirk ca0132_quirks[] = { SND_PCI_QUIRK(0x1102, 0x0013, "Recon3D", QUIRK_R3D), SND_PCI_QUIRK(0x1102, 0x0018, "Recon3D", QUIRK_R3D), SND_PCI_QUIRK(0x1102, 0x0051, "Sound Blaster AE-5", QUIRK_AE5), + SND_PCI_QUIRK(0x1102, 0x0081, "Sound Blaster AE-7", QUIRK_AE7), {} };

Set the boolean values used for desktop cards, and select the desktop mixer.

Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 5aad9d8ee5e4..ffad29ac7290 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -9403,6 +9403,10 @@ static int patch_ca0132(struct hda_codec *codec) spec->mixers[0] = desktop_mixer; snd_hda_codec_set_name(codec, "Sound BlasterX AE-5"); break; + case QUIRK_AE7: + spec->mixers[0] = desktop_mixer; + snd_hda_codec_set_name(codec, "Sound Blaster AE-7"); + break; default: spec->mixers[0] = ca0132_mixer; break; @@ -9413,6 +9417,7 @@ static int patch_ca0132(struct hda_codec *codec) case QUIRK_SBZ: case QUIRK_R3D: case QUIRK_AE5: + case QUIRK_AE7: case QUIRK_ZXR: spec->use_alt_controls = true; spec->use_alt_functions = true;

Add pre DSP initialization function for the AE-7.

Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 70 ++++++++++++++++++++++++++++-------- 1 file changed, 55 insertions(+), 15 deletions(-)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 41838a5587b6..9a1491d33819 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -8786,6 +8786,16 @@ static void ca0132_mmio_init(struct hda_codec *codec) } }

+static const unsigned int ca0132_ae5_register_set_addresses[] = { + 0x304, 0x304, 0x304, 0x304, 0x100, 0x304, 0x100, 0x304, 0x100, 0x304, + 0x100, 0x304, 0x86c, 0x800, 0x86c, 0x800, 0x804 +}; + +static const unsigned char ca0132_ae5_register_set_data[] = { + 0x0f, 0x0e, 0x1f, 0x0c, 0x3f, 0x08, 0x7f, 0x00, 0xff, 0x00, 0x6b, + 0x01, 0x6b, 0x57 +}; + /* * This function writes to some SFR's, does some region2 writes, and then * eventually resets the codec with the 0x7ff verb. Not quite sure why it does @@ -8794,6 +8804,18 @@ static void ca0132_mmio_init(struct hda_codec *codec) static void ae5_register_set(struct hda_codec *codec) { struct ca0132_spec *spec = codec->spec; + unsigned int count = ARRAY_SIZE(ca0132_ae5_register_set_addresses); + const unsigned int *addr = ca0132_ae5_register_set_addresses; + const unsigned char *data = ca0132_ae5_register_set_data; + unsigned int i, cur_addr; + unsigned char tmp[3]; + + if (ca0132_quirk(spec) == QUIRK_AE7) { + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x41); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc8); + }

chipio_8051_write_direct(codec, 0x93, 0x10); snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, @@ -8801,25 +8823,43 @@ static void ae5_register_set(struct hda_codec *codec) snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc2);

- writeb(0x0f, spec->mem_base + 0x304); - writeb(0x0f, spec->mem_base + 0x304); - writeb(0x0f, spec->mem_base + 0x304); - writeb(0x0f, spec->mem_base + 0x304); - writeb(0x0e, spec->mem_base + 0x100); - writeb(0x1f, spec->mem_base + 0x304); - writeb(0x0c, spec->mem_base + 0x100); - writeb(0x3f, spec->mem_base + 0x304); - writeb(0x08, spec->mem_base + 0x100); - writeb(0x7f, spec->mem_base + 0x304); - writeb(0x00, spec->mem_base + 0x100); - writeb(0xff, spec->mem_base + 0x304); + if (ca0132_quirk(spec) == QUIRK_AE7) { + tmp[0] = 0x03; + tmp[1] = 0x03; + tmp[2] = 0x07; + } else { + tmp[0] = 0x0f; + tmp[1] = 0x0f; + tmp[2] = 0x0f; + }

- ca0113_mmio_command_set(codec, 0x30, 0x2d, 0x3f); + for (i = cur_addr = 0; i < 3; i++, cur_addr++) + writeb(tmp[i], spec->mem_base + addr[cur_addr]); + + /* + * First writes are in single bytes, final are in 4 bytes. So, we use + * writeb, then writel. + */ + for (i = 0; cur_addr < 12; i++, cur_addr++) + writeb(data[i], spec->mem_base + addr[cur_addr]); + + for (; cur_addr < count; i++, cur_addr++) + writel(data[i], spec->mem_base + addr[cur_addr]); + + writel(0x00800001, spec->mem_base + 0x20c); + + if (ca0132_quirk(spec) == QUIRK_AE7) { + ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x83); + ca0113_mmio_command_set(codec, 0x30, 0x2e, 0x3f); + } else { + ca0113_mmio_command_set(codec, 0x30, 0x2d, 0x3f); + }

chipio_8051_write_direct(codec, 0x90, 0x00); chipio_8051_write_direct(codec, 0x90, 0x10);

- ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83); + if (ca0132_quirk(spec) == QUIRK_AE5) + ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83);

chipio_write(codec, 0x18b0a4, 0x000000c2);

@@ -8918,7 +8958,7 @@ static int ca0132_init(struct hda_codec *codec)

snd_hda_power_up_pm(codec);

- if (ca0132_quirk(spec) == QUIRK_AE5) + if (ca0132_quirk(spec) == QUIRK_AE5 || ca0132_quirk(spec) == QUIRK_AE7) ae5_register_set(codec);

ca0132_init_unsol(codec);

Add DSP setup functions for the Sound Blaster AE-7 post DSP download.

Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 290 +++++++++++++++++++++++++++++++++++ 1 file changed, 290 insertions(+)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 4ec93a070d73..040233b33074 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -7378,6 +7378,7 @@ static void ca0132_alt_init_speaker_tuning(struct hda_codec *codec) values = zxr_default_delay_values; break; case QUIRK_AE5: + case QUIRK_AE7: values = ae5_default_delay_values; break; default: @@ -7551,6 +7552,7 @@ static void ca0132_alt_dsp_scp_startup(struct hda_codec *codec) switch (ca0132_quirk(spec)) { case QUIRK_SBZ: case QUIRK_AE5: + case QUIRK_AE7: tmp = 0x00000003; dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); tmp = 0x00000000; @@ -7760,6 +7762,206 @@ static void ae5_post_dsp_startup_data(struct hda_codec *codec) mutex_unlock(&spec->chipio_mutex); }

+static const unsigned int ae7_port_set_data[] = { + 0x0001e0c0, 0x0001e1c1, 0x0001e4c2, 0x0001e5c3, 0x0001e2c4, 0x0001e3c5, + 0x0001e8c6, 0x0001e9c7, 0x0001ecc8, 0x0001edc9, 0x0001eaca, 0x0001ebcb +}; + +static void ae7_post_dsp_setup_ports(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int i, count, addr; + + mutex_lock(&spec->chipio_mutex); + + chipio_set_stream_channels(codec, 0x0c, 6); + chipio_set_stream_control(codec, 0x0c, 1); + + count = ARRAY_SIZE(ae7_port_set_data); + addr = 0x190030; + for (i = 0; i < count; i++) { + chipio_write_no_mutex(codec, addr, ae7_port_set_data[i]); + + /* Addresses are incremented by 4-bytes. */ + addr += 0x04; + } + + /* + * Port setting always ends with a write of 0x1 to address 0x19042c. + */ + chipio_write_no_mutex(codec, 0x19042c, 0x00000001); + + ca0113_mmio_command_set(codec, 0x30, 0x30, 0x00); + ca0113_mmio_command_set(codec, 0x48, 0x0d, 0x40); + ca0113_mmio_command_set(codec, 0x48, 0x17, 0x00); + ca0113_mmio_command_set(codec, 0x48, 0x19, 0x00); + ca0113_mmio_command_set(codec, 0x48, 0x11, 0xff); + ca0113_mmio_command_set(codec, 0x48, 0x12, 0xff); + ca0113_mmio_command_set(codec, 0x48, 0x13, 0xff); + ca0113_mmio_command_set(codec, 0x48, 0x14, 0x7f); + + mutex_unlock(&spec->chipio_mutex); +} + +static void ae7_post_dsp_asi_stream_setup(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + + mutex_lock(&spec->chipio_mutex); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x725, 0x81); + ca0113_mmio_command_set(codec, 0x30, 0x2b, 0x00); + + chipio_set_conn_rate_no_mutex(codec, 0x70, SR_96_000); + chipio_set_stream_channels(codec, 0x0c, 6); + chipio_set_stream_control(codec, 0x0c, 1); + + chipio_set_stream_source_dest(codec, 0x05, 0x43, 0x00); + chipio_set_stream_source_dest(codec, 0x18, 0x09, 0xd0); + + chipio_set_conn_rate_no_mutex(codec, 0xd0, SR_96_000); + chipio_set_stream_channels(codec, 0x18, 6); + chipio_set_stream_control(codec, 0x18, 1); + + chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 4); + + mutex_unlock(&spec->chipio_mutex); +} + +static void ae7_post_dsp_pll_setup(struct hda_codec *codec) +{ + const unsigned int addr[] = { 0x41, 0x45, 0x40, 0x43, 0x51 }; + const unsigned int data[] = { 0xc8, 0xcc, 0xcb, 0xc7, 0x8d }; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(addr); i++) { + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, addr[i]); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PLL_PMU_WRITE, data[i]); + } +} + +static void ae7_post_dsp_asi_setup_ports(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + const unsigned int target[] = { 0x0b, 0x04, 0x06, 0x0a, 0x0c, 0x11, + 0x12, 0x13, 0x14 }; + const unsigned int data[] = { 0x12, 0x00, 0x48, 0x05, 0x5f, 0xff, + 0xff, 0xff, 0x7f }; + unsigned int i; + + mutex_lock(&spec->chipio_mutex); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x43); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc7); + + chipio_write_no_mutex(codec, 0x189000, 0x0001f101); + chipio_write_no_mutex(codec, 0x189004, 0x0001f101); + chipio_write_no_mutex(codec, 0x189024, 0x00014004); + chipio_write_no_mutex(codec, 0x189028, 0x0002000f); + + ae7_post_dsp_pll_setup(codec); + chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 7); + + for (i = 0; i < ARRAY_SIZE(target); i++) + ca0113_mmio_command_set(codec, 0x48, target[i], data[i]); + + ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x83); + ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x00); + ca0113_mmio_command_set(codec, 0x48, 0x10, 0x00); + + chipio_set_stream_source_dest(codec, 0x21, 0x64, 0x56); + chipio_set_stream_channels(codec, 0x21, 2); + chipio_set_conn_rate_no_mutex(codec, 0x56, SR_8_000); + + chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_NODE_ID, 0x09); + /* + * In the 8051's memory, this param is referred to as 'n2sid', which I + * believe is 'node to streamID'. It seems to be a way to assign a + * stream to a given HDA node. + */ + chipio_set_control_param_no_mutex(codec, 0x20, 0x21); + + chipio_write_no_mutex(codec, 0x18b038, 0x00000088); + + /* + * Now, at this point on Windows, an actual stream is setup and + * seemingly sends data to the HDA node 0x09, which is the digital + * audio input node. This is left out here, because obviously I don't + * know what data is being sent. Interestingly, the AE-5 seems to go + * through the motions of getting here and never actually takes this + * step, but the AE-7 does. + */ + + ca0113_mmio_gpio_set(codec, 0, 1); + ca0113_mmio_gpio_set(codec, 1, 1); + + ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x83); + chipio_write_no_mutex(codec, 0x18b03c, 0x00000000); + ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x00); + ca0113_mmio_command_set(codec, 0x48, 0x10, 0x00); + + chipio_set_stream_source_dest(codec, 0x05, 0x43, 0x00); + chipio_set_stream_source_dest(codec, 0x18, 0x09, 0xd0); + + chipio_set_conn_rate_no_mutex(codec, 0xd0, SR_96_000); + chipio_set_stream_channels(codec, 0x18, 6); + + /* + * Runs again, this has been repeated a few times, but I'm just + * following what the Windows driver does. + */ + ae7_post_dsp_pll_setup(codec); + chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 7); + + mutex_unlock(&spec->chipio_mutex); +} + +/* + * The Windows driver has commands that seem to setup ASI, which I believe to + * be some sort of audio serial interface. My current speculation is that it's + * related to communicating with the new DAC. + */ +static void ae7_post_dsp_asi_setup(struct hda_codec *codec) +{ + chipio_8051_write_direct(codec, 0x93, 0x10); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x44); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc2); + + ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x83); + ca0113_mmio_command_set(codec, 0x30, 0x2e, 0x3f); + + chipio_set_control_param(codec, 3, 3); + chipio_set_control_flag(codec, CONTROL_FLAG_ASI_96KHZ, 1); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x724, 0x83); + chipio_set_control_param(codec, CONTROL_PARAM_ASI, 0); + snd_hda_codec_write(codec, 0x17, 0, 0x794, 0x00); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x92); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0xfa); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_DATA_WRITE, 0x22); + + ae7_post_dsp_pll_setup(codec); + ae7_post_dsp_asi_stream_setup(codec); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x43); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc7); + + ae7_post_dsp_asi_setup_ports(codec); +} + /* * Setup default parameters for DSP */ @@ -7983,6 +8185,91 @@ static void ae5_setup_defaults(struct hda_codec *codec) ca0132_alt_create_dummy_stream(codec); }

+/* + * Setup default parameters for the Sound Blaster AE-7 DSP. + */ +static void ae7_setup_defaults(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int tmp; + int num_fx; + int idx, i; + + if (spec->dsp_state != DSP_DOWNLOADED) + return; + + ca0132_alt_dsp_scp_startup(codec); + ca0132_alt_init_analog_mics(codec); + ae7_post_dsp_setup_ports(codec); + + tmp = FLOAT_ZERO; + dspio_set_uint_param(codec, 0x96, + SPEAKER_TUNING_FRONT_LEFT_INVERT, tmp); + dspio_set_uint_param(codec, 0x96, + SPEAKER_TUNING_FRONT_RIGHT_INVERT, tmp); + + ca0113_mmio_command_set(codec, 0x30, 0x2e, 0x3f); + + /* New, unknown SCP req's */ + dspio_set_uint_param(codec, 0x80, 0x0d, tmp); + dspio_set_uint_param(codec, 0x80, 0x0e, tmp); + + ca0113_mmio_gpio_set(codec, 0, false); + + /* Internal loopback off */ + tmp = FLOAT_ONE; + dspio_set_uint_param(codec, 0x37, 0x08, tmp); + dspio_set_uint_param(codec, 0x37, 0x10, tmp); + + /*remove DSP headroom*/ + tmp = FLOAT_ZERO; + dspio_set_uint_param(codec, 0x96, 0x3C, tmp); + + /* set WUH source */ + tmp = FLOAT_TWO; + dspio_set_uint_param(codec, 0x31, 0x00, tmp); + chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); + + /* Set speaker source? */ + dspio_set_uint_param(codec, 0x32, 0x00, tmp); + ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); + + /* + * This is the second time we've called this, but this is seemingly + * what Windows does. + */ + ca0132_alt_init_analog_mics(codec); + + ae7_post_dsp_asi_setup(codec); + + /* + * Not sure why, but these are both set to 1. They're only set to 0 + * upon shutdown. + */ + ca0113_mmio_gpio_set(codec, 0, true); + ca0113_mmio_gpio_set(codec, 1, true); + + /* Volume control related. */ + ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x04); + ca0113_mmio_command_set(codec, 0x48, 0x10, 0x04); + ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x80); + + /* out, in effects + voicefx */ + num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; + for (idx = 0; idx < num_fx; idx++) { + for (i = 0; i <= ca0132_effects[idx].params; i++) { + dspio_set_uint_param(codec, + ca0132_effects[idx].mid, + ca0132_effects[idx].reqs[i], + ca0132_effects[idx].def_vals[i]); + } + } + + ca0132_alt_init_speaker_tuning(codec); + + ca0132_alt_create_dummy_stream(codec); +} + /* * Initialization of flags in chip */ @@ -9000,6 +9287,9 @@ static int ca0132_init(struct hda_codec *codec) case QUIRK_AE5: ae5_setup_defaults(codec); break; + case QUIRK_AE7: + ae7_setup_defaults(codec); + break; default: ca0132_setup_defaults(codec); ca0132_init_analog_mic2(codec);

Add AE-7 quirk data for setting of microphone. The AE-7 has no front panel connector, so only rear-mic/line-in have new commands.

Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index ad594c2d47ec..933f3b0be63e 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -4997,6 +4997,15 @@ static int ca0132_alt_select_in(struct hda_codec *codec) ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); tmp = FLOAT_THREE; break; + case QUIRK_AE7: + ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); + tmp = FLOAT_THREE; + chipio_set_conn_rate(codec, MEM_CONNID_MICIN2, + SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2, + SR_96_000); + dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO); + break; default: tmp = FLOAT_ONE; break; @@ -5042,6 +5051,14 @@ static int ca0132_alt_select_in(struct hda_codec *codec) case QUIRK_AE5: ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); break; + case QUIRK_AE7: + ca0113_mmio_command_set(codec, 0x30, 0x28, 0x3f); + chipio_set_conn_rate(codec, MEM_CONNID_MICIN2, + SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2, + SR_96_000); + dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO); + break; default: break; } @@ -5051,7 +5068,10 @@ static int ca0132_alt_select_in(struct hda_codec *codec) if (ca0132_quirk(spec) == QUIRK_R3DI) chipio_set_conn_rate(codec, 0x0F, SR_96_000);

- tmp = FLOAT_ZERO; + if (ca0132_quirk(spec) == QUIRK_AE7) + tmp = FLOAT_THREE; + else + tmp = FLOAT_ZERO; dspio_set_uint_param(codec, 0x80, 0x00, tmp);

switch (ca0132_quirk(spec)) {

Add exit commands for the AE-7.

Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 9c70d85b21e0..4d26440eceb0 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -8838,6 +8838,32 @@ static void ae5_exit_chip(struct hda_codec *codec) snd_hda_codec_write(codec, 0x01, 0, 0x724, 0x83); }

+static void ae7_exit_chip(struct hda_codec *codec) +{ + chipio_set_stream_control(codec, 0x18, 0); + chipio_set_stream_source_dest(codec, 0x21, 0xc8, 0xc8); + chipio_set_stream_channels(codec, 0x21, 0); + chipio_set_control_param(codec, CONTROL_PARAM_NODE_ID, 0x09); + chipio_set_control_param(codec, 0x20, 0x01); + + chipio_set_control_param(codec, CONTROL_PARAM_ASI, 0); + + chipio_set_stream_control(codec, 0x18, 0); + chipio_set_stream_control(codec, 0x0c, 0); + + ca0113_mmio_command_set(codec, 0x30, 0x2b, 0x00); + snd_hda_codec_write(codec, 0x15, 0, 0x724, 0x83); + ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x83); + ca0113_mmio_command_set(codec, 0x30, 0x30, 0x00); + ca0113_mmio_command_set(codec, 0x30, 0x2e, 0x00); + ca0113_mmio_gpio_set(codec, 0, false); + ca0113_mmio_gpio_set(codec, 1, false); + ca0113_mmio_command_set(codec, 0x30, 0x32, 0x3f); + + snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); + snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x53); +} + static void zxr_exit_chip(struct hda_codec *codec) { chipio_set_stream_control(codec, 0x03, 0); @@ -9457,6 +9483,9 @@ static void ca0132_free(struct hda_codec *codec) case QUIRK_AE5: ae5_exit_chip(codec); break; + case QUIRK_AE7: + ae7_exit_chip(codec); + break; case QUIRK_R3DI: r3di_gpio_shutdown(codec); break;