On Thu, Jun 27, 2024 at 03:44:41PM GMT, Srinivas Kandagatla wrote:
Add support to parse static master port map information from device tree. This is required for correct port mapping between soundwire device and master ports.
Reviewed-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Tested-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Tested-by: Neil Armstrong neil.armstrong@linaro.org # on SM8650-HDK Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org
sound/soc/codecs/wsa884x.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/sound/soc/codecs/wsa884x.c b/sound/soc/codecs/wsa884x.c index a9767ef0e39d..a6034547b4f3 100644 --- a/sound/soc/codecs/wsa884x.c +++ b/sound/soc/codecs/wsa884x.c @@ -1887,6 +1887,14 @@ static int wsa884x_probe(struct sdw_slave *pdev, wsa884x->sconfig.direction = SDW_DATA_DIR_RX; wsa884x->sconfig.type = SDW_STREAM_PDM;
- /**
* Port map index starts with 0, however the data port for this codec* are from index 1*/- if (of_property_read_u32_array(dev->of_node, "qcom,port-mapping", &pdev->m_port_map[1],
WSA884X_MAX_SWR_PORTS))dev_dbg(dev, "Static Port mapping not specified\n");
Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org