On 5/2/19 2:06 AM, mac.chiang@intel.com wrote:
From: Mac Chiang mac.chiang@intel.com
amplifier feedback is not modeled as being dependent on any active output. Even when there is no playback happening, parts of the graph, specifically the IV sense->speaker protection->output remains active and this prevents the DSP from entering low-power states.
This patch suggest a machine driver level approach where the speaker pins are enabled/disabled dynamically depending on stream start/stop events. DPAM graph representations show the feedback loop is indeed disabled and low-power states can be reached.
Signed-off-by: Jenny TC jenny.tc@intel.com Signed-off-by: Harshapriya.n harshapriya.n@intel.com Signed-off-by: Mac Chiang mac.chiang@intel.com
I am confused here.
There was a first patch sent on March 1, then updates posted by Jenny TC with a v3 that I acked on March 8, but there's also a v4 on April 1.
So is this the same as v4? if yes why did you drop the change log or not add a note it's a resend? If no, what has changed?
sound/soc/intel/boards/kbl_da7219_max98927.c | 73 +++++++++++++++++++++++++++- 1 file changed, 71 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/boards/kbl_da7219_max98927.c b/sound/soc/intel/boards/kbl_da7219_max98927.c index f72a7bf..1efe7fd 100644 --- a/sound/soc/intel/boards/kbl_da7219_max98927.c +++ b/sound/soc/intel/boards/kbl_da7219_max98927.c @@ -219,8 +219,60 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream, return 0; }
+static int kabylake_ssp0_trigger(struct snd_pcm_substream *substream, int cmd) +{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- int j, ret;
- for (j = 0; j < rtd->num_codecs; j++) {
struct snd_soc_dai *codec_dai = rtd->codec_dais[j];
const char *name = codec_dai->component->name;
struct snd_soc_component *component = codec_dai->component;
struct snd_soc_dapm_context *dapm =
snd_soc_component_get_dapm(component);
char pin_name[20];
if (strcmp(name, MAX98927_DEV0_NAME) &&
strcmp(name, MAX98927_DEV1_NAME) &&
strcmp(name, MAX98373_DEV0_NAME) &&
strcmp(name, MAX98373_DEV1_NAME))
continue;
snprintf(pin_name, ARRAY_SIZE(pin_name), "%s Spk",
codec_dai->component->name_prefix);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ret = snd_soc_dapm_enable_pin(dapm, pin_name);
if (ret) {
dev_err(rtd->dev, "failed to enable %s: %d\n",
pin_name, ret);
return ret;
}
snd_soc_dapm_sync(dapm);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
ret = snd_soc_dapm_disable_pin(dapm, pin_name);
if (ret) {
dev_err(rtd->dev, "failed to disable %s: %d\n",
pin_name, ret);
return ret;
}
snd_soc_dapm_sync(dapm);
break;
}
- }
- return 0;
+}
static struct snd_soc_ops kabylake_ssp0_ops = { .hw_params = kabylake_ssp0_hw_params,
.trigger = kabylake_ssp0_trigger, };
static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
@@ -950,6 +1002,7 @@ static int kabylake_card_late_probe(struct snd_soc_card *card) { struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(card); struct kbl_hdmi_pcm *pcm;
- struct snd_soc_dapm_context *dapm = &card->dapm; struct snd_soc_component *component = NULL; int err, i = 0; char jack_name[NAME_SIZE];
@@ -976,9 +1029,25 @@ static int kabylake_card_late_probe(struct snd_soc_card *card) if (!component) return -EINVAL;
return hdac_hdmi_jack_port_init(component, &card->dapm);
return 0;
err = hdac_hdmi_jack_port_init(component, &card->dapm);
if (err < 0)
return err;
err = snd_soc_dapm_disable_pin(dapm, "Left Spk");
if (err) {
dev_err(card->dev, "failed to disable Left Spk: %d\n", err);
return err;
}
err = snd_soc_dapm_disable_pin(dapm, "Right Spk");
if (err) {
dev_err(card->dev, "failed to disable Right Spk: %d\n", err);
return err;
}
return snd_soc_dapm_sync(dapm); }
/* kabylake audio machine driver for SPT + DA7219 */