The patch
ASoC: max98357a: avoid speaker pop when playback startup
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.3
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From cec5b01f8f1c6064037f3181e7690e3765ed995b Mon Sep 17 00:00:00 2001
From: Mac Chiang mac.chiang@intel.com Date: Wed, 19 Jun 2019 18:18:33 +0800 Subject: [PATCH] ASoC: max98357a: avoid speaker pop when playback startup
Loud speaker pop happens during playback even when in slience playback. Specify Max98357a amp delay times to make sure clocks are always earlier than sdmode on.
Signed-off-by: Mac Chiang mac.chiang@intel.com Signed-off-by: Mark Brown broonie@kernel.org --- .../devicetree/bindings/sound/max98357a.txt | 4 ++ sound/soc/codecs/max98357a.c | 55 ++++++++++++++++--- 2 files changed, 50 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/max98357a.txt b/Documentation/devicetree/bindings/sound/max98357a.txt index 28645a2ff885..4bce14ce806f 100644 --- a/Documentation/devicetree/bindings/sound/max98357a.txt +++ b/Documentation/devicetree/bindings/sound/max98357a.txt @@ -9,6 +9,10 @@ Optional properties: - sdmode-gpios : GPIO specifier for the chip's SD_MODE pin. If this option is not specified then driver does not manage the pin state (e.g. chip is always on). +- sdmode-delay : specify delay time for SD_MODE pin. + If this option is specified, which means it's required i2s clocks + ready before SD_MODE is unmuted in order to avoid the speaker pop noise. + It's observed that 5ms is sufficient.
Example:
diff --git a/sound/soc/codecs/max98357a.c b/sound/soc/codecs/max98357a.c index 6f724c9a3867..6f0e28f903bf 100644 --- a/sound/soc/codecs/max98357a.c +++ b/sound/soc/codecs/max98357a.c @@ -19,24 +19,42 @@ #include <sound/soc-dai.h> #include <sound/soc-dapm.h>
+struct max98357a_priv { + struct delayed_work enable_sdmode_work; + struct gpio_desc *sdmode; + unsigned int sdmode_delay; +}; + +static void max98357a_enable_sdmode_work(struct work_struct *work) +{ + struct max98357a_priv *max98357a = + container_of(work, struct max98357a_priv, + enable_sdmode_work.work); + + gpiod_set_value(max98357a->sdmode, 1); +} + static int max98357a_daiops_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *dai) { - struct gpio_desc *sdmode = snd_soc_dai_get_drvdata(dai); + struct max98357a_priv *max98357a = snd_soc_dai_get_drvdata(dai);
- if (!sdmode) + if (!max98357a->sdmode) return 0;
switch (cmd) { case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - gpiod_set_value(sdmode, 1); + queue_delayed_work(system_power_efficient_wq, + &max98357a->enable_sdmode_work, + msecs_to_jiffies(max98357a->sdmode_delay)); break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - gpiod_set_value(sdmode, 0); + cancel_delayed_work_sync(&max98357a->enable_sdmode_work); + gpiod_set_value(max98357a->sdmode, 0); break; }
@@ -90,14 +108,33 @@ static struct snd_soc_dai_driver max98357a_dai_driver = {
static int max98357a_platform_probe(struct platform_device *pdev) { - struct gpio_desc *sdmode; + struct max98357a_priv *max98357a; + int ret;
- sdmode = devm_gpiod_get_optional(&pdev->dev, + max98357a = devm_kzalloc(&pdev->dev, sizeof(*max98357a), GFP_KERNEL); + + if (!max98357a) + return -ENOMEM; + + max98357a->sdmode = devm_gpiod_get_optional(&pdev->dev, "sdmode", GPIOD_OUT_LOW); - if (IS_ERR(sdmode)) - return PTR_ERR(sdmode);
- dev_set_drvdata(&pdev->dev, sdmode); + if (IS_ERR(max98357a->sdmode)) + return PTR_ERR(max98357a->sdmode); + + ret = device_property_read_u32(&pdev->dev, "sdmode-delay", + &max98357a->sdmode_delay); + + if (ret) { + max98357a->sdmode_delay = 0; + dev_dbg(&pdev->dev, + "no optional property 'sdmode-delay' found, default: no delay\n"); + } + + dev_set_drvdata(&pdev->dev, max98357a); + + INIT_DELAYED_WORK(&max98357a->enable_sdmode_work, + max98357a_enable_sdmode_work);
return devm_snd_soc_register_component(&pdev->dev, &max98357a_component_driver,