From: Conor Dooley conor.dooley@microchip.com
Hey all, This series should rid us of dtbs_check errors for the RISC-V Canaan k210 based boards. To make keeping it that way a little easier, I changed the Canaan devicetree Makefile so that it would build all of the devicetrees in the directory if SOC_CANAAN.
I *DO NOT* have any Canaan hardware so I have not tested any of this in action. Since I sent v1, I tried to buy some since it's cheap - but could out of the limited stockists none seemed to want to deliver to Ireland :( I based the series on next-20220617.
Thanks, Conor.
Changes since v3: - dts: drop the bogus "regs" property pointed out by Niklas - dma/timer: add Serge's reviews (and expand on the dma interrupt description) - dts: add Niklas' T-b where I felt it was suitable. lmk if you think it applies more broadly - spi: drop the applied spi dt-binding change. Thanks Mark.
Changes since v2: - i2s: added clocks maxItems - dma: unconditionally extended the interrupts & dropped canaan compatible - timer: as per Sergey, split the timer dts nodes in 2 & drop the binding patch - ili9341: add a canaan specific compatible to the binding and dts
Changes since v1: - I added a new dt node & compatible for the SRAM memory controller due Damien's wish to preserve the inter-op with U-Boot. - The dw-apb-ssi binding now uses the default rx/tx widths - A new patch fixes bus {ranges,reg} warnings - Rearranged the patches in a slightly more logical order
Conor Dooley (14): dt-bindings: display: convert ilitek,ili9341.txt to dt-schema dt-bindings: display: ili9341: document canaan kd233's lcd ASoC: dt-bindings: convert designware-i2s to dt-schema dt-bindings: dma: dw-axi-dmac: extend the number of interrupts dt-bindings: memory-controllers: add canaan k210 sram controller riscv: dts: canaan: fix the k210's memory node riscv: dts: canaan: fix the k210's timer nodes riscv: dts: canaan: fix mmc node names riscv: dts: canaan: fix kd233 display spi frequency riscv: dts: canaan: use custom compatible for k210 i2s riscv: dts: canaan: remove spi-max-frequency from controllers riscv: dts: canaan: fix bus {ranges,reg} warnings riscv: dts: canaan: add specific compatible for kd233's LCD riscv: dts: canaan: build all devicetress if SOC_CANAAN
.../bindings/display/ilitek,ili9341.txt | 27 ------ .../display/panel/ilitek,ili9341.yaml | 49 +++++++--- .../bindings/dma/snps,dw-axi-dmac.yaml | 7 +- .../memory-controllers/canaan,k210-sram.yaml | 52 ++++++++++ .../bindings/sound/designware-i2s.txt | 35 ------- .../bindings/sound/snps,designware-i2s.yaml | 94 +++++++++++++++++++ arch/riscv/boot/dts/canaan/Makefile | 10 +- arch/riscv/boot/dts/canaan/canaan_kd233.dts | 6 +- arch/riscv/boot/dts/canaan/k210.dtsi | 73 +++++++++----- .../riscv/boot/dts/canaan/sipeed_maix_bit.dts | 2 +- .../boot/dts/canaan/sipeed_maix_dock.dts | 2 +- arch/riscv/boot/dts/canaan/sipeed_maix_go.dts | 2 +- .../boot/dts/canaan/sipeed_maixduino.dts | 2 +- 13 files changed, 253 insertions(+), 108 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt create mode 100644 Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml delete mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt create mode 100644 Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
base-commit: 6cc11d2a1759275b856e464265823d94aabd5eaf