When using DT binding to pass private data, there would be Kernel panic occuring due to NULL pointer access in wm8962_i2c_probe(). Thus fix it.
Signed-off-by: Nicolin Chen b42378@freescale.com --- sound/soc/codecs/wm8962.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 2bf9ee7..7dd79c4 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3616,28 +3616,28 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, 0);
/* Apply static configuration for GPIOs */ - for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++) - if (pdata->gpio_init[i]) { + for (i = 0; i < ARRAY_SIZE(wm8962->pdata.gpio_init); i++) + if (wm8962->pdata.gpio_init[i]) { wm8962_set_gpio_mode(wm8962, i + 1); regmap_write(wm8962->regmap, 0x200 + i, - pdata->gpio_init[i] & 0xffff); + wm8962->pdata.gpio_init[i] & 0xffff); }
/* Put the speakers into mono mode? */ - if (pdata->spk_mono) + if (wm8962->pdata.spk_mono) regmap_update_bits(wm8962->regmap, WM8962_CLASS_D_CONTROL_2, WM8962_SPK_MONO_MASK, WM8962_SPK_MONO);
/* Micbias setup, detection enable and detection * threasholds. */ - if (pdata->mic_cfg) + if (wm8962->pdata.mic_cfg) regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4, WM8962_MICDET_ENA | WM8962_MICDET_THR_MASK | WM8962_MICSHORT_THR_MASK | WM8962_MICBIAS_LVL, - pdata->mic_cfg); + wm8962->pdata.mic_cfg);
/* Latch volume update bits */ regmap_update_bits(wm8962->regmap, WM8962_LEFT_INPUT_VOLUME, @@ -3682,7 +3682,7 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, }
if (wm8962->irq) { - if (pdata->irq_active_low) { + if (wm8962->pdata.irq_active_low) { trigger = IRQF_TRIGGER_LOW; irq_pol = WM8962_IRQ_POL; } else {