From: Sanyog Kale sanyog.r.kale@intel.com
Master and Slave port registers need to be programmed for each port used in a stream. Add the helpers for port register programming.
Signed-off-by: Sanyog Kale sanyog.r.kale@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com Signed-off-by: Shreyas NC shreyas.nc@intel.com --- drivers/soundwire/bus.h | 4 + drivers/soundwire/stream.c | 264 ++++++++++++++++++++++++++++++++++++++++++ include/linux/soundwire/sdw.h | 47 +++++++- 3 files changed, 314 insertions(+), 1 deletion(-)
diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h index 39e6811e435c..133268ab8086 100644 --- a/drivers/soundwire/bus.h +++ b/drivers/soundwire/bus.h @@ -106,6 +106,10 @@ struct sdw_master_runtime { struct list_head bus_node; };
+struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave, + enum sdw_data_direction direction, + unsigned int port_num); + int sdw_transfer(struct sdw_bus *bus, struct sdw_msg *msg); int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg, struct sdw_defer *defer); diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 7e2b3512d8e2..e46e2d90b3cf 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -11,9 +11,240 @@ #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/slab.h> +#include <linux/soundwire/sdw_registers.h> #include <linux/soundwire/sdw.h> #include "bus.h"
+static int _sdw_program_slave_port_params(struct sdw_bus *bus, + struct sdw_slave *slave, + struct sdw_transport_params *t_params, + enum sdw_dpn_type type) +{ + u32 addr1, addr2, addr3, addr4; + int ret; + u16 wbuf; + + if (bus->params.next_bank) { + addr1 = SDW_DPN_OFFSETCTRL2_B1(t_params->port_num); + addr2 = SDW_DPN_BLOCKCTRL3_B1(t_params->port_num); + addr3 = SDW_DPN_SAMPLECTRL2_B1(t_params->port_num); + addr4 = SDW_DPN_HCTRL_B1(t_params->port_num); + } else { + addr1 = SDW_DPN_OFFSETCTRL2_B0(t_params->port_num); + addr2 = SDW_DPN_BLOCKCTRL3_B0(t_params->port_num); + addr3 = SDW_DPN_SAMPLECTRL2_B0(t_params->port_num); + addr4 = SDW_DPN_HCTRL_B0(t_params->port_num); + } + + /* Program DPN_OffsetCtrl2 registers */ + ret = sdw_write(slave, addr1, t_params->offset2); + if (ret < 0) { + dev_err(bus->dev, "DPN_OffsetCtrl2 register write failed"); + return ret; + } + + /* Program DPN_BlockCtrl3 register */ + ret = sdw_write(slave, addr2, t_params->blk_pkg_mode); + if (ret < 0) { + dev_err(bus->dev, "DPN_BlockCtrl3 register write failed"); + return ret; + } + + /* + * Data ports are FULL, SIMPLE and REDUCED. This function handles + * FULL and REDUCED only and and beyond this point only FULL is + * handled, so bail out if we are not FULL data port type + */ + if (type != SDW_DPN_FULL) + return ret; + + /* Program DPN_SampleCtrl2 register */ + wbuf = (t_params->sample_interval - 1); + wbuf &= SDW_DPN_SAMPLECTRL_HIGH; + wbuf >>= SDW_REG_SHIFT(SDW_DPN_SAMPLECTRL_HIGH); + + ret = sdw_write(slave, addr3, wbuf); + if (ret < 0) { + dev_err(bus->dev, "DPN_SampleCtrl2 register write failed"); + return ret; + } + + /* Program DPN_HCtrl register */ + wbuf = t_params->hstart; + wbuf <<= SDW_REG_SHIFT(SDW_DPN_HCTRL_HSTART); + wbuf |= t_params->hstop; + + ret = sdw_write(slave, addr4, wbuf); + if (ret < 0) + dev_err(bus->dev, "DPN_HCtrl register write failed"); + + return ret; +} + +static int sdw_program_slave_port_params(struct sdw_bus *bus, + struct sdw_slave_runtime *s_rt, + struct sdw_port_runtime *p_rt) +{ + struct sdw_transport_params *t_params = &p_rt->transport_params; + struct sdw_port_params *p_params = &p_rt->port_params; + struct sdw_slave_prop *slave_prop = &s_rt->slave->prop; + u32 addr1, addr2, addr3, addr4, addr5, addr6; + struct sdw_dpn_prop *dpn_prop; + int ret; + u8 wbuf; + + dpn_prop = sdw_get_slave_dpn_prop(s_rt->slave, + s_rt->direction, + t_params->port_num); + if (!dpn_prop) + return -EINVAL; + + addr1 = SDW_DPN_PORTCTRL(t_params->port_num); + addr2 = SDW_DPN_BLOCKCTRL1(t_params->port_num); + + if (bus->params.next_bank) { + addr3 = SDW_DPN_SAMPLECTRL1_B1(t_params->port_num); + addr4 = SDW_DPN_OFFSETCTRL1_B1(t_params->port_num); + addr5 = SDW_DPN_BLOCKCTRL2_B1(t_params->port_num); + addr6 = SDW_DPN_LANECTRL_B1(t_params->port_num); + + } else { + addr3 = SDW_DPN_SAMPLECTRL1_B0(t_params->port_num); + addr4 = SDW_DPN_OFFSETCTRL1_B0(t_params->port_num); + addr5 = SDW_DPN_BLOCKCTRL2_B0(t_params->port_num); + addr6 = SDW_DPN_LANECTRL_B0(t_params->port_num); + } + + /* Program DPN_PortCtrl register */ + wbuf = p_params->data_mode << SDW_REG_SHIFT(SDW_DPN_PORTCTRL_DATAMODE); + wbuf |= p_params->flow_mode; + + ret = sdw_update(s_rt->slave, addr1, 0xF, wbuf); + if (ret < 0) { + dev_err(&s_rt->slave->dev, + "DPN_PortCtrl register write failed for port %d", + t_params->port_num); + return ret; + } + + /* Program DPN_BlockCtrl1 register */ + ret = sdw_write(s_rt->slave, addr2, (p_params->bps - 1)); + if (ret < 0) { + dev_err(&s_rt->slave->dev, + "DPN_BlockCtrl1 register write failed for port %d", + t_params->port_num); + return ret; + } + + /* Program DPN_SampleCtrl1 register */ + wbuf = (t_params->sample_interval - 1) & SDW_DPN_SAMPLECTRL_LOW; + ret = sdw_write(s_rt->slave, addr3, wbuf); + if (ret < 0) { + dev_err(&s_rt->slave->dev, + "DPN_SampleCtrl1 register write failed for port %d", + t_params->port_num); + return ret; + } + + /* Program DPN_OffsetCtrl1 registers */ + ret = sdw_write(s_rt->slave, addr4, t_params->offset1); + if (ret < 0) { + dev_err(&s_rt->slave->dev, + "DPN_OffsetCtrl1 register write failed for port %d", + t_params->port_num); + return ret; + } + + /* Program DPN_BlockCtrl2 register*/ + if (t_params->blk_grp_ctrl_valid) { + ret = sdw_write(s_rt->slave, addr5, t_params->blk_grp_ctrl); + if (ret < 0) { + dev_err(&s_rt->slave->dev, + "DPN_BlockCtrl2 reg write failed for port %d", + t_params->port_num); + return ret; + } + } + + /* program DPN_LaneCtrl register */ + if (slave_prop->lane_control_support) { + ret = sdw_write(s_rt->slave, addr6, t_params->lane_ctrl); + if (ret < 0) { + dev_err(&s_rt->slave->dev, + "DPN_LaneCtrl register write failed for port %d", + t_params->port_num); + return ret; + } + } + + if (dpn_prop->type != SDW_DPN_SIMPLE) { + ret = _sdw_program_slave_port_params(bus, s_rt->slave, + t_params, dpn_prop->type); + if (ret < 0) + dev_err(&s_rt->slave->dev, + "Transport reg write failed for port: %d", + t_params->port_num); + } + + return ret; +} + +static int sdw_program_master_port_params(struct sdw_bus *bus, + struct sdw_port_runtime *p_rt) +{ + int ret; + + /* + * we need to set transport and port parameters for the port. + * Transport parameters refers to the smaple interval, offsets and + * hstart/stop etc of the data. Port parameters refers to word + * length, flow mode etc of the port + */ + ret = bus->port_ops->dpn_set_port_transport_params(bus, + &p_rt->transport_params, + bus->params.next_bank); + if (ret < 0) + return ret; + + return bus->port_ops->dpn_set_port_params(bus, + &p_rt->port_params, + bus->params.next_bank); +} + +/** + * sdw_program_port_params: Programs transport parameters of Master(s) + * and Slave(s) + * + * @m_rt: Master stream runtime + */ +static int sdw_program_port_params(struct sdw_master_runtime *m_rt) +{ + struct sdw_slave_runtime *s_rt = NULL; + struct sdw_bus *bus = m_rt->bus; + struct sdw_port_runtime *p_rt; + int ret = 0; + + /* Program transport & port parameters for Slave(s) */ + list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { + list_for_each_entry(p_rt, &s_rt->port_list, port_node) { + + ret = sdw_program_slave_port_params(bus, s_rt, p_rt); + if (ret < 0) + return ret; + + } + } + + /* Program transport & port parameters for Master(s) */ + list_for_each_entry(p_rt, &m_rt->port_list, port_node) { + ret = sdw_program_master_port_params(bus, p_rt); + if (ret < 0) + return ret; + } + + return 0; +} + /** * sdw_release_stream: Free the assigned stream runtime * @@ -491,3 +722,36 @@ int sdw_stream_add_slave(struct sdw_slave *slave, return ret; } EXPORT_SYMBOL(sdw_stream_add_slave); + +/** + * sdw_get_slave_dpn_prop: Get Slave port capabilities + * + * @slave: Slave handle + * @direction: Data direction. + * @port_num: Port number + */ +struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave, + enum sdw_data_direction direction, + unsigned int port_num) +{ + struct sdw_dpn_prop *dpn_prop; + u8 num_ports; + int i; + + if (direction == SDW_DATA_DIR_TX) { + num_ports = hweight32(slave->prop.source_ports); + dpn_prop = slave->prop.src_dpn_prop; + } else { + num_ports = hweight32(slave->prop.sink_ports); + dpn_prop = slave->prop.sink_dpn_prop; + } + + for (i = 0; i < num_ports; i++) { + dpn_prop = &dpn_prop[i]; + + if (dpn_prop->num == port_num) + return &dpn_prop[i]; + } + + return NULL; +} diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index e7567c28e630..453fe11b9eb2 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -367,7 +367,30 @@ struct sdw_slave_intr_status { };
/** - * struct sdw_slave_ops - Slave driver callback ops + * sdw_reg_bank - SoundWire register banks + * @SDW_BANK0: Soundwire register bank 0 + * @SDW_BANK1: Soundwire register bank 1 + */ +enum sdw_reg_bank { + SDW_BANK0, + SDW_BANK1, +}; + +/** + * struct sdw_bus_params: Structure holding bus configuration + * + * @curr_bank: Current bank in use (BANK0/BANK1) + * @next_bank: Next bank to use (BANK0/BANK1). next_bank will always be + * set to !curr_bank + */ +struct sdw_bus_params { + enum sdw_reg_bank curr_bank; + enum sdw_reg_bank next_bank; +}; + +/** + * struct sdw_slave_ops: Slave driver callback ops + * * @read_prop: Read Slave properties * @interrupt_callback: Device interrupt notification (invoked in thread * context) @@ -482,6 +505,24 @@ struct sdw_transport_params { unsigned int lane_ctrl; };
+/** + * struct sdw_master_port_ops: Callback functions from bus to Master + * driver to set Master Data ports. + * + * @dpn_set_port_params: Set the Port parameters for the Master Port. + * Mandatory callback + * @dpn_set_port_transport_params: Set transport parameters for the Master + * Port. Mandatory callback + */ +struct sdw_master_port_ops { + int (*dpn_set_port_params)(struct sdw_bus *bus, + struct sdw_port_params *port_params, + unsigned int bank); + int (*dpn_set_port_transport_params)(struct sdw_bus *bus, + struct sdw_transport_params *transport_params, + enum sdw_reg_bank bank); +}; + struct sdw_msg;
/** @@ -525,6 +566,8 @@ struct sdw_master_ops { * @bus_lock: bus lock * @msg_lock: message lock * @ops: Master callback ops + * @port_ops: Master port callback ops + * @params: Current bus parameters * @prop: Master properties * @m_rt_list: List of Master instance of all stream(s) running on Bus. This * is used to compute and program bus bandwidth, clock, frame shape, @@ -540,6 +583,8 @@ struct sdw_bus { struct mutex bus_lock; struct mutex msg_lock; const struct sdw_master_ops *ops; + const struct sdw_master_port_ops *port_ops; + struct sdw_bus_params params; struct sdw_master_prop prop; struct list_head m_rt_list; struct sdw_defer defer_msg;