Re: [alsa-devel] No sound with ATI SB450

Try downloading a current daily snapshot from ftp://ftp.suse.com/pub/projects/alsa/snapshot/ .

There was an issue with the ATI HD Audio detection that was fixed after 14rc3 was released.

Tobin

On Sat, 2007-04-21 at 16:00 +1000, Ben DiDonc wrote:

The output of alsa-info.sh is available at http://pastebin.ca/451007

On 4/21/07, Tobin Davis tdavis@dsl-only.net wrote:

    Could you download an run
    http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh ,
    then post the resulting link?  This will help determine what
    setup you have.

    Tobin Davis



    On Sat, 2007-04-21 at 14:56 +1000, Ben DiDonc wrote:
    > Hi I have a toshiba A100 (see attached file lspci-nnv) with
    > a ATI SB450. Sound worked fine with kernel 2.6.17 and alsa
    > 1.0.12rc1 (ubuntu edgy). I just did a fresh install of
    > ubuntu feisty (kernel 2.6.20, alsa 1.0.14rc1) and the only
    > mixer settings available are those of the modem, named
    > off-hook and caller-id (see output of amixer, aplay -l , and
    > the rest in attached file output_feisty) I decided to
    > upgrade alsa-driver and alsa-lib to 1.0.14rc2. after
    > downloading the package, I unloaded all sound related
    > modules (everything with "snd_" in it) in the right order
    > and did: ./configure --with-oss=yes
    > --with-cards=hda-intel;make; sudo make install; sudo
    > modprobe snd_hda_intel A minor improvement: the mixer now
    > shows controls for both the modem and the sound card (see
    > output_after_upgrade_to_rc2), but unfortunately, there is
    > still no sound coming out of those speakers (even though
    > alsamixer shows control for PCM and the rest...). Finally, I
    > downloaded alsa-driver-1.0.14rc3 and gave it a shot. This
    > time again, only modem related settings appeared in
    > alsamixer, and no sound card stuff (see aplay and amixer in
    > output_after_upgrade_to_rc3), and no sound either. Does
    > anyone know how to get some sound out of these speakers
    > (given that it used to work with alsa1.0.12rc1...) ? Thanks
    > for your help Ben 
    > 
    > _______________________________________________
    > Alsa-devel mailing list
    > Alsa-devel@alsa-project.org
    > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
    > 

    -- 
    Tobin Davis <tdavis@dsl-only.net>