The list of TAS571x registers was incomplete. Added the missing register definitions up to the register 0x25. Added volatile and read-only register tables into tas5711_regmap_config and tas5717_regmap_config.
The chip has 256 registers in total. But from address 0x29 on (0x26 to 0x28 are reserved) the register width varies between 20, 12 and 8 bytes, which the register map is unable to represent.
Signed-off-by: Petr Kulhavy petr@barix.com --- v1: <initial>
v2: <no change>
v3: added volatile and read-only register tables into regmap configs
sound/soc/codecs/tas571x.c | 28 ++++++++++++++++++++++++++++ sound/soc/codecs/tas571x.h | 22 ++++++++++++++++++++++ 2 files changed, 50 insertions(+)
diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index 39307ad..d255d65 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -57,6 +57,10 @@ static int tas571x_register_size(struct tas571x_private *priv, unsigned int reg) case TAS571X_CH1_VOL_REG: case TAS571X_CH2_VOL_REG: return priv->chip->vol_reg_size; + case TAS571X_INPUT_MUX_REG: + case TAS571X_CH4_SRC_SELECT_REG: + case TAS571X_PWM_MUX_REG: + return 4; default: return 1; } @@ -241,6 +245,26 @@ static const struct snd_kcontrol_new tas5711_controls[] = { 1, 1), };
+static const struct regmap_range tas571x_readonly_regs_range[] = { + regmap_reg_range(TAS571X_CLK_CTRL_REG, TAS571X_DEV_ID_REG), +}; + +static const struct regmap_range tas571x_volatile_regs_range[] = { + regmap_reg_range(TAS571X_CLK_CTRL_REG, TAS571X_ERR_STATUS_REG), + regmap_reg_range(TAS571X_OSC_TRIM_REG, TAS571X_OSC_TRIM_REG), +}; + +static const struct regmap_access_table tas571x_write_regs = { + .no_ranges = tas571x_readonly_regs_range, + .n_no_ranges = ARRAY_SIZE(tas571x_readonly_regs_range), +}; + +static const struct regmap_access_table tas571x_volatile_regs = { + .yes_ranges = tas571x_volatile_regs_range, + .n_yes_ranges = ARRAY_SIZE(tas571x_volatile_regs_range), + +}; + static const struct reg_default tas5711_reg_defaults[] = { { 0x04, 0x05 }, { 0x05, 0x40 }, @@ -260,6 +284,8 @@ static const struct regmap_config tas5711_regmap_config = { .reg_defaults = tas5711_reg_defaults, .num_reg_defaults = ARRAY_SIZE(tas5711_reg_defaults), .cache_type = REGCACHE_RBTREE, + .wr_table = &tas571x_write_regs, + .volatile_table = &tas571x_volatile_regs, };
static const struct tas571x_chip tas5711_chip = { @@ -314,6 +340,8 @@ static const struct regmap_config tas5717_regmap_config = { .reg_defaults = tas5717_reg_defaults, .num_reg_defaults = ARRAY_SIZE(tas5717_reg_defaults), .cache_type = REGCACHE_RBTREE, + .wr_table = &tas571x_write_regs, + .volatile_table = &tas571x_volatile_regs, };
/* This entry is reused for tas5719 as the software interface is identical. */ diff --git a/sound/soc/codecs/tas571x.h b/sound/soc/codecs/tas571x.h index 0aee471..cf800c3 100644 --- a/sound/soc/codecs/tas571x.h +++ b/sound/soc/codecs/tas571x.h @@ -13,6 +13,10 @@ #define _TAS571X_H
/* device registers */ +#define TAS571X_CLK_CTRL_REG 0x00 +#define TAS571X_DEV_ID_REG 0x01 +#define TAS571X_ERR_STATUS_REG 0x02 +#define TAS571X_SYS_CTRL_1_REG 0x03 #define TAS571X_SDI_REG 0x04 #define TAS571X_SDI_FMT_MASK 0x0f
@@ -27,7 +31,25 @@ #define TAS571X_MVOL_REG 0x07 #define TAS571X_CH1_VOL_REG 0x08 #define TAS571X_CH2_VOL_REG 0x09 +#define TAS571X_CH3_VOL_REG 0x0a +#define TAS571X_VOL_CFG_REG 0x0e +#define TAS571X_MODULATION_LIMIT_REG 0x10 +#define TAS571X_IC_DELAY_CH1_REG 0x11 +#define TAS571X_IC_DELAY_CH2_REG 0x12 +#define TAS571X_IC_DELAY_CH3_REG 0x13 +#define TAS571X_IC_DELAY_CH4_REG 0x14
+#define TAS571X_PWM_CH_SDN_GROUP_REG 0x19 /* N/A on TAS5717, TAS5719 */ +#define TAS571X_PWM_CH1_SDN_MASK (1<<0) +#define TAS571X_PWM_CH2_SDN_SHIFT (1<<1) +#define TAS571X_PWM_CH3_SDN_SHIFT (1<<2) +#define TAS571X_PWM_CH4_SDN_SHIFT (1<<3) + +#define TAS571X_START_STOP_PERIOD_REG 0x1a #define TAS571X_OSC_TRIM_REG 0x1b +#define TAS571X_BKND_ERR_REG 0x1c +#define TAS571X_INPUT_MUX_REG 0x20 +#define TAS571X_CH4_SRC_SELECT_REG 0x21 +#define TAS571X_PWM_MUX_REG 0x25
#endif /* _TAS571X_H */