On 7/19/21 11:37 PM, Pierre-Louis Bossart wrote:
On 7/19/21 11:51 AM, Vijendar Mukunda wrote:
ACP5.x IP has multiple I2S controllers and DMA controller. Create platform devices for I2S HS controller instance, I2S SP controller instance and DMA contrller.
typo: controller
Will fix it.
Pass PCI resources like MMIO, irq to these platform devices.
Signed-off-by: Vijendar Mukunda Vijendar.Mukunda@amd.com
sound/soc/amd/vangogh/acp5x.h | 10 ++++ sound/soc/amd/vangogh/pci-acp5x.c | 95 ++++++++++++++++++++++++++++++- 2 files changed, 102 insertions(+), 3 deletions(-)
diff --git a/sound/soc/amd/vangogh/acp5x.h b/sound/soc/amd/vangogh/acp5x.h index 708586109315..bbf29fd2b12f 100644 --- a/sound/soc/amd/vangogh/acp5x.h +++ b/sound/soc/amd/vangogh/acp5x.h @@ -22,6 +22,16 @@ #define ACP_ERR_INTR_MASK 0x20000000 #define ACP_EXT_INTR_STAT_CLEAR_MASK 0xFFFFFFFF
+#define ACP5x_DEVS 0x03
3?
Will create 3 platform devices for DMA device and two I2S controllers.
+#define ACP5x_REG_START 0x1240000 +#define ACP5x_REG_END 0x1250200 +#define ACP5x_I2STDM_REG_START 0x1242400 +#define ACP5x_I2STDM_REG_END 0x1242410 +#define ACP5x_HS_TDM_REG_START 0x1242814 +#define ACP5x_HS_TDM_REG_END 0x1242824 +#define I2S_MODE 0x00 +#define ACP5x_I2S_MODE 0x00
/* common header file uses exact offset rather than relative
- offset which requires substraction logic from base_addr
typo: subtraction
Will fix it
- for accessing ACP5x MMIO space registers
diff --git a/sound/soc/amd/vangogh/pci-acp5x.c b/sound/soc/amd/vangogh/pci-acp5x.c index 523b962fe35e..3cc15a15b745 100644 --- a/sound/soc/amd/vangogh/pci-acp5x.c +++ b/sound/soc/amd/vangogh/pci-acp5x.c @@ -8,11 +8,16 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h>
#include "acp5x.h"
struct acp5x_dev_data { void __iomem *acp5x_base;
- bool acp5x_audio_mode;
- struct resource *res;
- struct platform_device *pdev[3];
pdev[ACP5x_DEVS] ?
Will update it.
};
static int acp5x_power_on(void __iomem *acp5x_base) @@ -114,9 +119,12 @@ static int snd_acp5x_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) { struct acp5x_dev_data *adata;
- int ret;
- u32 addr;
struct platform_device_info pdevinfo[3];
unsigned int irqflags;
int ret, i;
u32 addr, val;
irqflags = IRQF_SHARED; if (pci->revision != 0x50) return -ENODEV;
@@ -150,6 +158,83 @@ static int snd_acp5x_probe(struct pci_dev *pci, if (ret) goto release_regions;
- val = acp_readl(adata->acp5x_base + ACP_PIN_CONFIG);
- switch (val) {
- case I2S_MODE:
adata->res = devm_kzalloc(&pci->dev,
sizeof(struct resource) * 4,
what is this 4 value?
We are creating 4 resources using MFD framework. Will use macro instead of hard-coded value.
GFP_KERNEL);
if (!adata->res) {
ret = -ENOMEM;
goto de_init;
}
adata->res[0].name = "acp5x_i2s_iomem";
adata->res[0].flags = IORESOURCE_MEM;
adata->res[0].start = addr;
adata->res[0].end = addr + (ACP5x_REG_END - ACP5x_REG_START);
adata->res[1].name = "acp5x_i2s_sp";
adata->res[1].flags = IORESOURCE_MEM;
adata->res[1].start = addr + ACP5x_I2STDM_REG_START;
adata->res[1].end = addr + ACP5x_I2STDM_REG_END;
adata->res[2].name = "acp5x_i2s_hs";
adata->res[2].flags = IORESOURCE_MEM;
adata->res[2].start = addr + ACP5x_HS_TDM_REG_START;
adata->res[2].end = addr + ACP5x_HS_TDM_REG_END;
adata->res[3].name = "acp5x_i2s_irq";
adata->res[3].flags = IORESOURCE_IRQ;
adata->res[3].start = pci->irq;
adata->res[3].end = adata->res[3].start;
adata->acp5x_audio_mode = ACP5x_I2S_MODE;
memset(&pdevinfo, 0, sizeof(pdevinfo));
pdevinfo[0].name = "acp5x_i2s_dma";
pdevinfo[0].id = 0;
pdevinfo[0].parent = &pci->dev;
pdevinfo[0].num_res = 4;
pdevinfo[0].res = &adata->res[0];
pdevinfo[0].data = &irqflags;
pdevinfo[0].size_data = sizeof(irqflags);
pdevinfo[1].name = "acp5x_i2s_playcap";
pdevinfo[1].id = 0;
pdevinfo[1].parent = &pci->dev;
pdevinfo[1].num_res = 1;
pdevinfo[1].res = &adata->res[1];
pdevinfo[2].name = "acp5x_i2s_playcap";
pdevinfo[2].id = 1;
pdevinfo[2].parent = &pci->dev;
pdevinfo[2].num_res = 1;
pdevinfo[2].res = &adata->res[2];
for (i = 0; i < ACP5x_DEVS; i++) {
adata->pdev[i] =
platform_device_register_full(&pdevinfo[i]);
if (IS_ERR(adata->pdev[i])) {
dev_err(&pci->dev, "cannot register %s device\n",
pdevinfo[i].name);
ret = PTR_ERR(adata->pdev[i]);
goto unregister_devs;
}
}
break;
- default:
dev_info(&pci->dev, "ACP audio mode : %d\n", val);
- }
- return 0;
+unregister_devs:
- if (val == I2S_MODE)
nit-pick: you can't reach this point outside of the I2S_MODE, so this test is not useful
for (i = 0; i < ACP5x_DEVS; i++)
platform_device_unregister(adata->pdev[i]);
only unregister what you registered?
Yes, We are unregistering devices which got registered. We can refactor the code by moving code to switch case it self rather than handling by declaring the label for it.
Will fix it and post the new version.
for (--i; i > 0; i--)
+de_init:
- if (acp5x_deinit(adata->acp5x_base))
dev_err(&pci->dev, "ACP de-init failed\n");
release_regions: pci_release_regions(pci); disable_pci: @@ -161,9 +246,13 @@ static int snd_acp5x_probe(struct pci_dev *pci, static void snd_acp5x_remove(struct pci_dev *pci) { struct acp5x_dev_data *adata;
- int ret;
int i, ret;
adata = pci_get_drvdata(pci);
if (adata->acp5x_audio_mode == ACP5x_I2S_MODE) {
for (i = 0; i < ACP5x_DEVS; i++)
platform_device_unregister(adata->pdev[i]);
} ret = acp5x_deinit(adata->acp5x_base); if (ret) dev_err(&pci->dev, "ACP de-init failed\n");