The patch
ASoC: rt5514: Add devicetree binding support for rt5514-spi
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From d6604145dfccc3dd9e882dd3d6bd2545c9ff64e9 Mon Sep 17 00:00:00 2001
From: Jeffy Chen jeffy.chen@rock-chips.com Date: Mon, 18 Sep 2017 19:14:34 +0800 Subject: [PATCH] ASoC: rt5514: Add devicetree binding support for rt5514-spi
Add devicetree binding support for rt5514 spi dsp codec.
Signed-off-by: Jeffy Chen jeffy.chen@rock-chips.com Signed-off-by: Mark Brown broonie@kernel.org --- Documentation/devicetree/bindings/sound/rt5514.txt | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt index 929ca6756b02..4f33b0d96afe 100644 --- a/Documentation/devicetree/bindings/sound/rt5514.txt +++ b/Documentation/devicetree/bindings/sound/rt5514.txt @@ -1,22 +1,27 @@ RT5514 audio CODEC
-This device supports I2C only. +This device supports both I2C and SPI.
Required properties:
- compatible : "realtek,rt5514".
-- reg : The I2C address of the device. +- reg : the I2C address of the device for I2C, the chip select + number for SPI.
Optional properties:
- clocks: The phandle of the master clock to the CODEC - clock-names: Should be "mclk"
+- interrupt-parent: The phandle for the interrupt controller. +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. + - realtek,dmic-init-delay-ms - Set the DMIC initial delay (ms) to wait it ready. + Set the DMIC initial delay (ms) to wait it ready for I2C.
-Pins on the device (for linking into audio routes) for RT5514: +Pins on the device (for linking into audio routes) for I2C:
* DMIC1L * DMIC1R