16 Jun
2016
16 Jun
'16
3:15 a.m.
// + Adam,
On 2016年06月16日 03:43, Steve Barber wrote:
On Mon, Jun 13, 2016 at 1:42 AM, Xing Zhengzhengxing@rock-chips.com wrote:
+static int rockchip_sound_da7219_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
+{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_dapm_context *dapm =&rtd->card->dapm;
int mclk, ret;
snd_soc_dapm_disable_pin(dapm, "Speakers");
snd_soc_dapm_disable_pin(dapm, "Int Mic");
snd_soc_dapm_enable_pin(dapm, "Headphones");
snd_soc_dapm_enable_pin(dapm, "Headset Mic");
snd_soc_dapm_sync(dapm);
/* in bypass mode, the mclk has to be one of the frequencies below */
switch (params_rate(params)) {
case 8000:
case 16000:
case 24000:
case 32000:
case 48000:
case 64000:
case 96000:
mclk = 12288000;
break;
case 11025:
case 22050:
case 44100:
case 88200:
mclk = 11289600;
break;
default:
return -EINVAL;
}
ret = snd_soc_dai_set_sysclk(cpu_dai, 0, mclk,
SND_SOC_CLOCK_OUT);
if (ret< 0) {
dev_err(codec_dai->dev, "Can't set cpu clock out %d\n", ret);
return ret;
}
ret = snd_soc_dai_set_sysclk(codec_dai, 0, mclk,
SND_SOC_CLOCK_IN);
if (ret< 0) {
dev_err(codec_dai->dev, "Can't set codec clock in %d\n", ret);
return ret;
}
ret = snd_soc_dai_set_pll(codec_dai, 0, DA7219_SYSCLK_MCLK, 0, 0);
if (ret< 0) {
dev_err(codec_dai->dev, "Can't set pll sysclk mclk %d\n", ret);
return ret;
}
return 0;
+}
+static int rockchip_sound_da7219_init(struct snd_soc_pcm_runtime *rtd) +{
struct snd_soc_codec *codec = rtd->codec_dais[0]->codec;
int ret;
/* Enable Headset and 4 Buttons Jack detection */
ret = snd_soc_card_jack_new(rtd->card, "Headset Jack",
SND_JACK_HEADSET |
Should this also include SND_JACK_LINEOUT? da7219 differentiates between the two so not including lineout means, for example, we can miss jack insertion/removal events.
Hi Adam,
Could you please confirm Steve says that about SND_JACK_LINEOUT?
Thanks.
--
- Xing Zheng