Hi Jerome
Thank you for testing
I have tested this series on an Amlogic device (vim3l) This brings warnings for cases which are perfectly fine.
For example, one of the DPCM backends is the TDM interface. This interface is capable of both playback and capture. It can be associated with any i2s/TDM codec.
The codec may do playback and capture too, but it may also do a single direction. Then usual example is the hdmi codec which does playback only.
In this case I get: axg-sound-card sound: CPU capture is available but Codec capture is not (be.dai-link-6) Please update Codec driver
I don't think this is right.
Hmm..., I'm confusing Does it mean you want to use "playback only" on it ? If so, did you get below warning too ? "both playback/capture are available, but not using playback_only flag (%s)\n",
If not, can you please fill below ?
Card dpcm_playback = (0 or 1) dpcm_capture = (0 or 1) playback_only = (0 or 1) capture_only = (0 or 1) BE.CPU playback = (available, not available) capture = (available, not available) BE.Codec playback = (available, not available) capture = (available, not available) Expect playback = (available, not available) capture = (available, not available)
Thank you for your help !!
Best regards --- Renesas Electronics Ph.D. Kuninori Morimoto