Mark Brown wrote:
On Fri, Mar 28, 2008 at 09:27:04AM -0500, lokowich wrote:
Forwarded from davinci-linux-open-source list:
CCing in Vladimir Barinov who contributed the DaVinci support.
I've built this ASoC patch into my DaVinci git kernel (thanks for the SENSORS tip), and can use aplay and speaker-test, but no sound. Figured it may be a mixer/volume control issue, but the alsamixer is unable to open for a failed ioctl on USBDEVFS_IOCTL. Not sure why there is a USB dependency. Noted that there is no /sys/class/sound/mixer in my sysfs. Any ideas?
How do you figure out that you can play sound? Also what platform do you use - is it Davinci-EVM? what line output do you use to hear the sound? Please, post your dmesg log and cat /proc/interrupts too.
It might be helpful to post dmesg output showing the sound support being loaded
Bernard Blackham wrote:
Behme wrote:
While searching something different, I just found
http://www.spinics.net/lists/alsa-devel/msg12535.html
As I'm not subscribed to alsa-devel, I don't have the original post. Maybe any of the authors can post it do this list as well?
The patch mainly applies to our git. I fixed two small rejects in Kconfig and Makefile as the patch is for newer kernel than our git. Untested patch against our git in attachment. Anybody likes to test?
Well, I tried compiling it and it failed to build. It appears that it's built on a set of patches for Davinci posted to LAK, including this completely revamped EDMA support[1]:
Yep, it's needed.
So I had to change a few definitions, import a few functions from the new DMA support and managed to get it compiling and loading, but not yet working (tried various sample rates and formats):
root@davinci-dvevm:/tst$ aplay test.wav Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo ALSA lib pcm_params.c:2152:(snd_pcm_hw_refine_slave) Slave PCM not usable aplay: set_params:878: Broken configuration for this PCM: no configurations available
root@davinci-dvevm:/tst$ arecord -r 48000 -f S16_LE Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono ALSA lib pcm_params.c:2152:(snd_pcm_hw_refine_slave) Slave PCM not usable arecord: set_params:878: Broken configuration for this PCM: no configurations available
And this is the extent of my knowledge of ALSA - I can continue digging, but maybe somebody else will beat me to it =) It's looking promising though.
Attached is the patch I have so far that applies against current git. This is not for going upstream, but just for testing. Notes:
- Apply patch
- Enable SND_SOC, SND_DAVINCI_SOC, SND_DAVINCI_SOC_I2S, SND_DAVINCI_SOC_EVM
and SND_SOC_TLV320AIC3X.
- Make sure CONFIG_I2C_DAVINCI is enabled, but disable the
CONFIG_SENSORS_TLV320* options.
- Build.
- Load the snd-soc-evm module.
Bernard.
[1] These patches appear to have gone absolutely nowhere beyond that list. I can't find them in any tree. But they are cleaner and more conforming to the Linux Kernel style than what's currently in git.
Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel