Add suspend and resume sleep callbacks, to support system low power modes.
Signed-off-by: Olivier Moysan olivier.moysan@st.com --- sound/soc/stm/stm32_i2s.c | 33 ++++++++++++++++++++++++++++++--- 1 file changed, 30 insertions(+), 3 deletions(-)
diff --git a/sound/soc/stm/stm32_i2s.c b/sound/soc/stm/stm32_i2s.c index 6d0bf78d114d..dbe23a709d24 100644 --- a/sound/soc/stm/stm32_i2s.c +++ b/sound/soc/stm/stm32_i2s.c @@ -186,8 +186,9 @@ enum i2s_datlen { #define STM32_I2S_IS_SLAVE(x) ((x)->ms_flg == I2S_MS_SLAVE)
/** + * struct stm32_i2s_data - private data of I2S * @regmap_conf: I2S register map configuration pointer - * @egmap: I2S register map pointer + * @regmap: I2S register map pointer * @pdev: device data pointer * @dai_drv: DAI driver pointer * @dma_data_tx: dma configuration data for tx channel @@ -596,8 +597,8 @@ static int stm32_i2s_trigger(struct snd_pcm_substream *substream, int cmd, return ret; }
- ret = regmap_update_bits(i2s->regmap, STM32_I2S_CR1_REG, - I2S_CR1_CSTART, I2S_CR1_CSTART); + ret = regmap_write_bits(i2s->regmap, STM32_I2S_CR1_REG, + I2S_CR1_CSTART, I2S_CR1_CSTART); if (ret < 0) { dev_err(cpu_dai->dev, "Error %d starting I2S\n", ret); return ret; @@ -703,6 +704,7 @@ static const struct regmap_config stm32_h7_i2s_regmap_conf = { .volatile_reg = stm32_i2s_volatile_reg, .writeable_reg = stm32_i2s_writeable_reg, .fast_io = true, + .cache_type = REGCACHE_FLAT, };
static const struct snd_soc_dai_ops stm32_i2s_pcm_dai_ops = { @@ -929,10 +931,35 @@ static int stm32_i2s_remove(struct platform_device *pdev)
MODULE_DEVICE_TABLE(of, stm32_i2s_ids);
+#ifdef CONFIG_PM_SLEEP +static int stm32_i2s_suspend(struct device *dev) +{ + struct stm32_i2s_data *i2s = dev_get_drvdata(dev); + + regcache_cache_only(i2s->regmap, true); + regcache_mark_dirty(i2s->regmap); + + return 0; +} + +static int stm32_i2s_resume(struct device *dev) +{ + struct stm32_i2s_data *i2s = dev_get_drvdata(dev); + + regcache_cache_only(i2s->regmap, false); + return regcache_sync(i2s->regmap); +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops stm32_i2s_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(stm32_i2s_suspend, stm32_i2s_resume) +}; + static struct platform_driver stm32_i2s_driver = { .driver = { .name = "st,stm32-i2s", .of_match_table = stm32_i2s_ids, + .pm = &stm32_i2s_pm_ops, }, .probe = stm32_i2s_probe, .remove = stm32_i2s_remove,