Avoid requesting the audpwron gpio in case of ES1.0 revision. In the past we requested the gpio, but we did not free it up, since we made the check for the revision later. This results later checks for gpio validity to fail, leaving the gpio reserved (even after the driver has been removed).
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- drivers/mfd/twl6040-core.c | 11 ++++++----- 1 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index 51c3b47..7dc8c47 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -470,7 +470,6 @@ static int __devinit twl6040_probe(struct platform_device *pdev) platform_set_drvdata(pdev, twl6040);
twl6040->dev = &pdev->dev; - twl6040->audpwron = pdata->audpwron_gpio; twl6040->irq = pdata->naudint_irq; twl6040->irq_base = pdata->irq_base;
@@ -480,6 +479,12 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
+ /* ERRATA: Automatic power-up is not possible in ES1.0 */ + if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) + twl6040->audpwron = pdata->audpwron_gpio; + else + twl6040->audpwron = -EINVAL; + if (gpio_is_valid(twl6040->audpwron)) { ret = gpio_request(twl6040->audpwron, "audpwron"); if (ret) @@ -490,10 +495,6 @@ static int __devinit twl6040_probe(struct platform_device *pdev) goto gpio2_err; }
- /* ERRATA: Automatic power-up is not possible in ES1.0 */ - if (twl6040_get_revid(twl6040) == TWL6040_REV_ES1_0) - twl6040->audpwron = -EINVAL; - /* codec interrupt */ ret = twl6040_irq_init(twl6040); if (ret)