From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
rsnd driver sometimes want to know which address is used when debugging. But it will indicate "(____ptrval____)" if it used "%p" on dev_dbg(). Let's use "%pa" or "%px" for it.
Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Tested-by: Hiroyuki Yokoyama hiroyuki.yokoyama.vx@renesas.com --- sound/soc/sh/rcar/adg.c | 4 ++-- sound/soc/sh/rcar/dma.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/sh/rcar/adg.c b/sound/soc/sh/rcar/adg.c index 051f964..28327dd 100644 --- a/sound/soc/sh/rcar/adg.c +++ b/sound/soc/sh/rcar/adg.c @@ -582,7 +582,7 @@ static void rsnd_adg_clk_dbg_info(struct rsnd_priv *priv, struct rsnd_adg *adg) int i;
for_each_rsnd_clk(clk, adg, i) - dev_dbg(dev, "%s : %p : %ld\n", + dev_dbg(dev, "%s : %pa : %ld\n", clk_name[i], clk, clk_get_rate(clk));
dev_dbg(dev, "BRGCKR = 0x%08x, BRRA/BRRB = 0x%x/0x%x\n", @@ -595,7 +595,7 @@ static void rsnd_adg_clk_dbg_info(struct rsnd_priv *priv, struct rsnd_adg *adg) * by BRGCKR::BRGCKR_31 */ for_each_rsnd_clkout(clk, adg, i) - dev_dbg(dev, "clkout %d : %p : %ld\n", i, + dev_dbg(dev, "clkout %d : %pa : %ld\n", i, clk, clk_get_rate(clk)); } #else diff --git a/sound/soc/sh/rcar/dma.c b/sound/soc/sh/rcar/dma.c index b5f3bf8..0bbc4b0 100644 --- a/sound/soc/sh/rcar/dma.c +++ b/sound/soc/sh/rcar/dma.c @@ -397,7 +397,7 @@ static void rsnd_dmapp_write(struct rsnd_dma *dma, u32 data, u32 reg) struct rsnd_dma_ctrl *dmac = rsnd_priv_to_dmac(priv); struct device *dev = rsnd_priv_to_dev(priv);
- dev_dbg(dev, "w %p : %08x\n", rsnd_dmapp_addr(dmac, dma, reg), data); + dev_dbg(dev, "w 0x%px : %08x\n", rsnd_dmapp_addr(dmac, dma, reg), data);
iowrite32(data, rsnd_dmapp_addr(dmac, dma, reg)); }