At Sun, 27 May 2007 23:50:35 +0100, Ivan N. Zlatev wrote:
Hello,
I am on an iMac ("*imac-20" model/pinconfig) with a Intel HD card with the SigmaTel STAC9221 codec. I have attached the inital codec info after modprobe. I am using Alsa HG. Setting the mux gain to a value > 20 (0x02 Amp-Out value) results a non-working microphone. Steps and codec diffs as follows:
Thanks for the survey!
And, does this volume have any influence on the quality of recorded sound at all? If not, we should remove this control rather than keeping a dangerous thing...
Takashi
- initial - microphone working
- Mux Gain = 10 - microphone working
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
- Amp-Out vals: [0x00 0x00]
- Amp-Out vals: [0x01 0x01] Connection: 7 0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a
- Mux Gain = 20 - microphone working
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
- Amp-Out vals: [0x01 0x01]
- Amp-Out vals: [0x02 0x02] Connection: 7 0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a
- Mux Gain = 30 - microphone not working
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
- Amp-Out vals: [0x02 0x02]
- Amp-Out vals: [0x03 0x03] Connection: 7 0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a
- Mux Gain = 40 - microphone not working
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
- Amp-Out vals: [0x03 0x03]
- Amp-Out vals: [0x04 0x04] Connection: 7 0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a
Regards
Ivan N. Zlatev
Web: http://www.i-nZ.net "It's all some kind of whacked out conspiracy."