For some platforms where DA7219 is the DAI clock master, BCLK/WCLK will be set and enabled prior to the codec's hw_params() function being called. It is possible the platform requires a different BCLK configuration than would be chosen by hw_params(), for example S16_LE format needed with a 64-bit frame to satisfy certain devices using the clocks.
To handle those kinds of scenarios, the use of clk_round_rate() is now employed as part of hw_params(). If BCLK is already enabled then this function will just return the currently set rate, if it is valid for the desired frame size, so the subsequent call to clk_set_rate() will succeed and nothing changes with regards to clocking. In addition the specific BCLK & WCLK recalc_rate() implementations needed updating to always give back a real value, as those functions are called as part of the clk init code and a real value is needed for the clk_round_rate() call to work as expected.
Signed-off-by: Adam Thomson Adam.Thomson.Opensource@diasemi.com --- Changes in v2: - Removed clk_round_rate() call for WCLK/SR as this is not sensible. - Added checking after clk_round_rate() call for BCLK to verify returne rate is suitable for the hw_params() desired frame size.
sound/soc/codecs/da7219.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/da7219.c b/sound/soc/codecs/da7219.c index 5f5fa34..206d01c 100644 --- a/sound/soc/codecs/da7219.c +++ b/sound/soc/codecs/da7219.c @@ -1621,6 +1621,21 @@ static int da7219_hw_params(struct snd_pcm_substream *substream,
if (bclk) { bclk_rate = frame_size * sr; + /* + * Rounding the rate here avoids failure trying to set a + * new rate on an already enabled bclk. In that + * instance this will just set the same rate as is + * currently in use, and so should continue without + * problem, as long as the BCLK rate is suitable for the + * desired frame size. + */ + bclk_rate = clk_round_rate(bclk, bclk_rate); + if ((bclk_rate / sr) < frame_size) { + dev_err(component->dev, + "BCLK rate mismatch against frame size"); + return -EINVAL; + } + ret = clk_set_rate(bclk, bclk_rate); if (ret) { dev_err(component->dev, @@ -1927,9 +1942,6 @@ static unsigned long da7219_wclk_recalc_rate(struct clk_hw *hw, struct snd_soc_component *component = da7219->component; u8 fs = snd_soc_component_read32(component, DA7219_SR);
- if (!da7219->master) - return 0; - switch (fs & DA7219_SR_MASK) { case DA7219_SR_8000: return 8000; @@ -2016,9 +2028,6 @@ static unsigned long da7219_bclk_recalc_rate(struct clk_hw *hw, u8 bclks_per_wclk = snd_soc_component_read32(component, DA7219_DAI_CLK_MODE);
- if (!da7219->master) - return 0; - switch (bclks_per_wclk & DA7219_DAI_BCLKS_PER_WCLK_MASK) { case DA7219_DAI_BCLKS_PER_WCLK_32: return parent_rate * 32;