On Fri, Dec 17, 2021 at 5:45 PM Lucas Tanure tanureal@opensource.cirrus.com wrote:
Add support for CS35L41 using a new separated driver that can be used in all upcoming designs
+config SND_HDA_SCODEC_CS35L41_I2C
tristate "Build CS35L41 HD-audio side codec support for I2C Bus"depends on ACPIselect SND_HDA_GENERICselect SND_SOC_CS35L41_LIBselect SND_HDA_SCODEC_CS35L41helpSay Y or M here to include CS35L41 I2C HD-audio side codec supportin snd-hda-intel driver, such as ALC287.+comment "Set to Y if you want auto-loading the side codec driver"
depends on SND_HDA=y && SND_HDA_SCODEC_CS35L41_I2C=m+config SND_HDA_SCODEC_CS35L41_SPI
tristate "Build CS35L41 HD-audio codec support for SPI Bus"depends on ACPIselect SND_HDA_GENERICselect SND_SOC_CS35L41_LIBselect SND_HDA_SCODEC_CS35L41helpSay Y or M here to include CS35L41 SPI HD-audio side codec supportin snd-hda-intel driver, such as ALC287.
...
+// cs35l41.c -- CS35l41 ALSA HDA audio driver
It's an additional burden in case the file will be renamed. i..o.w. drop the names of the files from the files.
+#include <linux/acpi.h> +#include <linux/module.h> +#include <sound/hda_codec.h> +#include "hda_local.h" +#include "hda_auto_parser.h" +#include "hda_jack.h" +#include "hda_generic.h" +#include "hda_component.h" +#include "cs35l41_hda.h"
...
{ CS35L41_PWR_CTRL1, 0x00000001, 2000 }, //GLOBAL_EN = 1
Here and everywhere else, missed space after //
...
+static void cs35l41_hda_playback_hook(struct device *dev, int action) +{
struct cs35l41_hda *cs35l41 = dev_get_drvdata(dev);const struct cs35l41_hda_reg_sequence *reg_seq = cs35l41->reg_seq;struct regmap *reg = cs35l41->regmap;int ret = 0;switch (action) {case HDA_GEN_PCM_ACT_OPEN:if (reg_seq->open)ret = regmap_multi_reg_write(reg, reg_seq->open, reg_seq->num_open);break;case HDA_GEN_PCM_ACT_PREPARE:if (reg_seq->prepare)ret = regmap_multi_reg_write(reg, reg_seq->prepare, reg_seq->num_prepare);break;case HDA_GEN_PCM_ACT_CLEANUP:if (reg_seq->cleanup)ret = regmap_multi_reg_write(reg, reg_seq->cleanup, reg_seq->num_cleanup);break;case HDA_GEN_PCM_ACT_CLOSE:if (reg_seq->close)ret = regmap_multi_reg_write(reg, reg_seq->close, reg_seq->num_close);break;
default case?
}if (ret)dev_warn(cs35l41->dev, "Failed to apply multi reg write: %d\n", ret);
Redundant blank line.
+}
...
if (comps && cs35l41->index >= 0 && cs35l41->index < HDA_MAX_COMPONENTS)comps = &comps[cs35l41->index];elsereturn -EINVAL;
Can you check first? In such a case you won't need the 'else' branch at all.
...
if (!comps->dev) {
Why not a positive check and standard pattern as per above?
comps->dev = dev;strscpy(comps->name, dev_name(dev), sizeof(comps->name));comps->playback_hook = cs35l41_hda_playback_hook;comps->set_channel_map = cs35l41_hda_channel_map;return 0;}return -EBUSY;+}
...
switch (hw_cfg->gpio1_func) {case CS35l41_VSPK_SWITCH:regmap_update_bits(cs35l41->regmap, CS35L41_GPIO_PAD_CONTROL,CS35L41_GPIO1_CTRL_MASK, 1 << CS35L41_GPIO1_CTRL_SHIFT);break;case CS35l41_SYNC:regmap_update_bits(cs35l41->regmap, CS35L41_GPIO_PAD_CONTROL,CS35L41_GPIO1_CTRL_MASK, 2 << CS35L41_GPIO1_CTRL_SHIFT);break;
default case?
Same for all switch-cases in your code.
}
...
ret = cs35l41_hda_channel_map(cs35l41->dev, 0, NULL, 1, (unsigned int *)&hw_cfg->spk_pos);if (ret)return ret;return 0;
return cs35l41_hda_...(...);
...
property = "cirrus,dev-index";ret = device_property_count_u32(acpi_dev, property);
Please, name adev the pointer to ACPI device. Ah, what a mess, you have named acpi_dev the pointer to the struct device. Please, find a better name, like dev, or physdev or so.
if (ret <= 0)
Shouldn't you override the error code for the 0 case?
goto no_acpi_dsd;
...
if (ret > ARRAY_SIZE(values)) {ret = -EINVAL;goto err;}
Is it really the issue? I would expect the issue when you have less than expected, and not otherwise.
...
/* No devm_ version as CLSA0100, in no_acpi_dsd case, can't use devm version */
Can you elaborate why devm can't be used?
cs35l41->reset_gpio = fwnode_gpiod_get_index(&adev->fwnode, "reset", cs35l41->index,
Please, do not dereference fwnode pointers. Also, why can't you use the device instead of fwnode?
GPIOD_OUT_LOW, "cs35l41-reset");
...
hw_cfg = kzalloc(sizeof(*hw_cfg), GFP_KERNEL);
Why not devm?
if (!hw_cfg) {ret = -ENOMEM;goto err;}
...
property = "cirrus,speaker-position";ret = device_property_read_u32_array(acpi_dev, property, values, nval);if (ret)goto err_free;hw_cfg->spk_pos = values[cs35l41->index];
This and further is weird. Why do you need to retrieve all values for just one? Use indexed APIs for that. If there are none, create them.
...
+no_acpi_dsd:
/** Device CLSA0100 doesn't have _DSD so a gpiod_get by the label reset won't work.
So, you need to add mapping tables and switch to regular APIs, tell me, why it won't work.
* And devices created by i2c-multi-instantiate don't have their device struct pointing to* the correct fwnode, so acpi_dev must be used here* And devm functions expect that the device requesting the resource has the correct* fwnode
You missed grammar periods and what else? Please, update your comments to use proper English grammar.
*/if (strncmp(hid, "CLSA0100", 8) != 0)return ERR_PTR(-EINVAL);/* check I2C address to assign the index */cs35l41->index = id == 0x40 ? 0 : 1;cs35l41->reset_gpio = gpiod_get_index(acpi_dev, NULL, 0, GPIOD_OUT_HIGH);cs35l41->vspk_always_on = true;put_device(acpi_dev);return NULL;+}
...
+int cs35l41_hda_probe(struct device *dev, const char *device_name, int id, int irq,
struct regmap *regmap)
if (IS_ERR(regmap))return PTR_ERR(regmap);
Why?
...
if (IS_ERR(cs35l41->reset_gpio)) {
You should use _optinal variants instead,
ret = PTR_ERR(cs35l41->reset_gpio);cs35l41->reset_gpio = NULL;if (ret == -EBUSY) {dev_info(cs35l41->dev, "Reset line busy, assuming shared reset\n");} else {if (ret != -EPROBE_DEFER)dev_err(cs35l41->dev, "Failed to get reset GPIO: %d\n", ret);goto err;
We have dev_err_probe() for a few releases already.
}}
...
ret = regmap_read(cs35l41->regmap, CS35L41_IRQ1_STATUS3, &int_sts);if (ret || (int_sts & CS35L41_OTP_BOOT_ERR)) {dev_err(cs35l41->dev, "OTP Boot error\n");ret = -EIO;
Why shadowing error code? Why not use dev_err_probe()?
goto err;}
...
+EXPORT_SYMBOL_GPL(cs35l41_hda_probe);
Please, use the namespace variant and avoid polluting the global namespace with your symbols.
...
- cs35l41_hda.h -- CS35L41 ALSA HDA audio driver
No file names in the files.
...
+#include <linux/regulator/consumer.h> +#include <linux/gpio/consumer.h> +#include <linux/device.h> +#include <sound/cs35l41.h>
Please revisit this. You need to add here only the headers that you are a direct user of (or in some cases their top level ones, like types.h for compiler_attributes.h).
...
+#ifdef CONFIG_ACPI
Drop this ugliness.
+static const struct acpi_device_id cs35l41_acpi_hda_match[] = {
{"CLSA0100", 0 },{"CSC3551", 0 },
I believe these IDs are officially allocated by the Cirrus Logic, right?
{ },
No comma for terminator line here and everywhere else where it's the case.
+}; +MODULE_DEVICE_TABLE(acpi, cs35l41_acpi_hda_match); +#endif
+static struct i2c_driver cs35l41_i2c_driver = {
.driver = {.name = "cs35l41-hda",.acpi_match_table = ACPI_PTR(cs35l41_acpi_hda_match),
ACPI_PTR() as well.
},.id_table = cs35l41_hda_i2c_id,.probe = cs35l41_hda_i2c_probe,.remove = cs35l41_hda_i2c_remove,+};
No need to have a blank line here.
+module_i2c_driver(cs35l41_i2c_driver);
I stopped here, so this code needs more work and can't be applied like this.
I believe that current Cirrus Logic drivers are written in the same (semi-) bad style and have to be fixed in the future. Put this to your TODO list, please.