The WM8962 features a DSP providing a number of signal processing features including HD Bass and Virtual Surround Sound (VSS). Enable initial support for this, allowing users to enable and disable the algorithms using the default coefficient sets. Further patches will add support for runtime configuration of the DSP coefficients.
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/wm8962.c | 157 ++++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 156 insertions(+), 1 deletions(-)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 8526383..c9e07aa 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -63,6 +63,8 @@ struct wm8962_priv { int fll_fref; int fll_fout;
+ u16 dsp2_ena; + struct delayed_work mic_work; struct snd_soc_jack *jack;
@@ -967,7 +969,7 @@ static const struct wm8962_reg_access { [584] = { 0x002D, 0x002D, 0x0000 }, /* R584 - IRQ Debounce */ [586] = { 0xC000, 0xC000, 0x0000 }, /* R586 - MICINT Source Pol */ [768] = { 0x0001, 0x0001, 0x0000 }, /* R768 - DSP2 Power Management */ - [1037] = { 0x0000, 0x003F, 0x0000 }, /* R1037 - DSP2_ExecControl */ + [1037] = { 0x0000, 0x003F, 0xFFFF }, /* R1037 - DSP2_ExecControl */ [4096] = { 0x3FFF, 0x3FFF, 0x0000 }, /* R4096 - Write Sequencer 0 */ [4097] = { 0x00FF, 0x00FF, 0x0000 }, /* R4097 - Write Sequencer 1 */ [4098] = { 0x070F, 0x070F, 0x0000 }, /* R4098 - Write Sequencer 2 */ @@ -1988,6 +1990,122 @@ static const unsigned int classd_tlv[] = { }; static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+static int wm8962_dsp2_write_config(struct snd_soc_codec *codec) +{ + return 0; +} + +static int wm8962_dsp2_set_enable(struct snd_soc_codec *codec, u16 val) +{ + u16 adcl = snd_soc_read(codec, WM8962_LEFT_ADC_VOLUME); + u16 adcr = snd_soc_read(codec, WM8962_RIGHT_ADC_VOLUME); + u16 dac = snd_soc_read(codec, WM8962_ADC_DAC_CONTROL_1); + + /* Mute the ADCs and DACs */ + snd_soc_write(codec, WM8962_LEFT_ADC_VOLUME, 0); + snd_soc_write(codec, WM8962_RIGHT_ADC_VOLUME, WM8962_ADC_VU); + snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1, + WM8962_DAC_MUTE, WM8962_DAC_MUTE); + + snd_soc_write(codec, WM8962_SOUNDSTAGE_ENABLES_0, val); + + /* Restore the ADCs and DACs */ + snd_soc_write(codec, WM8962_LEFT_ADC_VOLUME, adcl); + snd_soc_write(codec, WM8962_RIGHT_ADC_VOLUME, adcr); + snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1, + WM8962_DAC_MUTE, dac); + + return 0; +} + +static int wm8962_dsp2_start(struct snd_soc_codec *codec) +{ + struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + + wm8962_dsp2_write_config(codec); + + snd_soc_write(codec, WM8962_DSP2_EXECCONTROL, WM8962_DSP2_RUNR); + + wm8962_dsp2_set_enable(codec, wm8962->dsp2_ena); + + return 0; +} + +static int wm8962_dsp2_stop(struct snd_soc_codec *codec) +{ + wm8962_dsp2_set_enable(codec, 0); + + snd_soc_write(codec, WM8962_DSP2_EXECCONTROL, WM8962_DSP2_STOP); + + return 0; +} + +#define WM8962_DSP2_ENABLE(xname, xshift) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = wm8962_dsp2_ena_info, \ + .get = wm8962_dsp2_ena_get, .put = wm8962_dsp2_ena_put, \ + .private_value = xshift } + +static int wm8962_dsp2_ena_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + + return 0; +} + +static int wm8962_dsp2_ena_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int shift = kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + + ucontrol->value.integer.value[0] = !!(wm8962->dsp2_ena & 1 << shift); + + return 0; +} + +static int wm8962_dsp2_ena_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int shift = kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + int old = wm8962->dsp2_ena; + int ret = 0; + int dsp2_running = snd_soc_read(codec, WM8962_DSP2_POWER_MANAGEMENT) & + WM8962_DSP2_ENA; + + mutex_lock(&codec->mutex); + + if (ucontrol->value.integer.value[0]) + wm8962->dsp2_ena |= 1 << shift; + else + wm8962->dsp2_ena &= ~(1 << shift); + + if (wm8962->dsp2_ena == old) + goto out; + + ret = 1; + + if (dsp2_running) { + if (wm8962->dsp2_ena) + wm8962_dsp2_set_enable(codec, wm8962->dsp2_ena); + else + wm8962_dsp2_stop(codec); + } + +out: + mutex_unlock(&codec->mutex); + + return ret; +} + /* The VU bits for the headphones are in a different register to the mute * bits and only take effect on the PGA if it is actually powered. */ @@ -2146,6 +2264,11 @@ SOC_DOUBLE_R_TLV("EQ4 Volume", WM8962_EQ3, WM8962_EQ23, WM8962_EQL_B4_GAIN_SHIFT, 31, 0, eq_tlv), SOC_DOUBLE_R_TLV("EQ5 Volume", WM8962_EQ3, WM8962_EQ23, WM8962_EQL_B5_GAIN_SHIFT, 31, 0, eq_tlv), + +WM8962_DSP2_ENABLE("VSS Switch", WM8962_VSS_ENA_SHIFT), +WM8962_DSP2_ENABLE("HPF1 Switch", WM8962_HPF1_ENA_SHIFT), +WM8962_DSP2_ENABLE("HPF2 Switch", WM8962_HPF2_ENA_SHIFT), +WM8962_DSP2_ENABLE("HD Bass Switch", WM8962_HDBASS_ENA_SHIFT), };
static const struct snd_kcontrol_new wm8962_spk_mono_controls[] = { @@ -2405,6 +2528,31 @@ static int out_pga_event(struct snd_soc_dapm_widget *w, } }
+static int dsp2_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + if (wm8962->dsp2_ena) + wm8962_dsp2_start(codec); + break; + + case SND_SOC_DAPM_PRE_PMD: + if (wm8962->dsp2_ena) + wm8962_dsp2_stop(codec); + break; + + default: + BUG(); + return -EINVAL; + } + + return 0; +} + static const char *st_text[] = { "None", "Right", "Left" };
static const struct soc_enum str_enum = @@ -2527,6 +2675,9 @@ SND_SOC_DAPM_SUPPLY("SYSCLK", WM8962_CLOCKING2, 5, 0, sysclk_event, SND_SOC_DAPM_SUPPLY("Charge Pump", WM8962_CHARGE_PUMP_1, 0, 0, cp_event, SND_SOC_DAPM_POST_PMU), SND_SOC_DAPM_SUPPLY("TOCLK", WM8962_ADDITIONAL_CONTROL_1, 0, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY_S("DSP2", 1, WM8962_DSP2_POWER_MANAGEMENT, + WM8962_DSP2_ENA_SHIFT, 0, dsp2_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_MIXER("INPGAL", WM8962_LEFT_INPUT_PGA_CONTROL, 4, 0, inpgal, ARRAY_SIZE(inpgal)), @@ -2622,11 +2773,13 @@ static const struct snd_soc_dapm_route wm8962_intercon[] = { { "ADCL", NULL, "TOCLK" }, { "ADCL", NULL, "MIXINL" }, { "ADCL", NULL, "DMIC" }, + { "ADCL", NULL, "DSP2" },
{ "ADCR", NULL, "SYSCLK" }, { "ADCR", NULL, "TOCLK" }, { "ADCR", NULL, "MIXINR" }, { "ADCR", NULL, "DMIC" }, + { "ADCR", NULL, "DSP2" },
{ "STL", "Left", "ADCL" }, { "STL", "Right", "ADCR" }, @@ -2638,11 +2791,13 @@ static const struct snd_soc_dapm_route wm8962_intercon[] = { { "DACL", NULL, "TOCLK" }, { "DACL", NULL, "Beep" }, { "DACL", NULL, "STL" }, + { "DACL", NULL, "DSP2" },
{ "DACR", NULL, "SYSCLK" }, { "DACR", NULL, "TOCLK" }, { "DACR", NULL, "Beep" }, { "DACR", NULL, "STR" }, + { "DACR", NULL, "DSP2" },
{ "HPMIXL", "IN4L Switch", "IN4L" }, { "HPMIXL", "IN4R Switch", "IN4R" },