A patch named "ASoC: Actively manage WM8903 DC servo configuration" was applied twice, with commit IDs:
1605b831ae71a4008671e43113e1151a669ed0bf c5b6a9feaeb0fa0e39e3fc10f9bf8cc8de498739
Remove the duplicate code caused by this.
Signed-off-by: Stephen Warren swarren@nvidia.com --- sound/soc/codecs/wm8903.c | 97 --------------------------------------------- 1 files changed, 0 insertions(+), 97 deletions(-)
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index 7ca2593..ae1cadf 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -373,103 +373,6 @@ static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm, } }
-static int wm8903_dcs_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - struct snd_soc_codec *codec = w->codec; - struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); - - switch (event) { - case SND_SOC_DAPM_POST_PMU: - wm8903->dcs_pending |= 1 << w->shift; - break; - case SND_SOC_DAPM_PRE_PMD: - snd_soc_update_bits(codec, WM8903_DC_SERVO_0, - 1 << w->shift, 0); - break; - } - - return 0; -} - -#define WM8903_DCS_MODE_WRITE_STOP 0 -#define WM8903_DCS_MODE_START_STOP 2 - -static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm, - enum snd_soc_dapm_type event, int subseq) -{ - struct snd_soc_codec *codec = container_of(dapm, - struct snd_soc_codec, dapm); - struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); - int dcs_mode = WM8903_DCS_MODE_WRITE_STOP; - int i, val; - - /* Complete any pending DC servo starts */ - if (wm8903->dcs_pending) { - dev_dbg(codec->dev, "Starting DC servo for %x\n", - wm8903->dcs_pending); - - /* If we've no cached values then we need to do startup */ - for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) { - if (!(wm8903->dcs_pending & (1 << i))) - continue; - - if (wm8903->dcs_cache[i]) { - dev_dbg(codec->dev, - "Restore DC servo %d value %x\n", - 3 - i, wm8903->dcs_cache[i]); - - snd_soc_write(codec, WM8903_DC_SERVO_4 + i, - wm8903->dcs_cache[i] & 0xff); - } else { - dev_dbg(codec->dev, - "Calibrate DC servo %d\n", 3 - i); - dcs_mode = WM8903_DCS_MODE_START_STOP; - } - } - - /* Don't trust the cache for analogue */ - if (wm8903->class_w_users) - dcs_mode = WM8903_DCS_MODE_START_STOP; - - snd_soc_update_bits(codec, WM8903_DC_SERVO_2, - WM8903_DCS_MODE_MASK, dcs_mode); - - snd_soc_update_bits(codec, WM8903_DC_SERVO_0, - WM8903_DCS_ENA_MASK, wm8903->dcs_pending); - - switch (dcs_mode) { - case WM8903_DCS_MODE_WRITE_STOP: - break; - - case WM8903_DCS_MODE_START_STOP: - msleep(270); - - /* Cache the measured offsets for digital */ - if (wm8903->class_w_users) - break; - - for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) { - if (!(wm8903->dcs_pending & (1 << i))) - continue; - - val = snd_soc_read(codec, - WM8903_DC_SERVO_READBACK_1 + i); - dev_dbg(codec->dev, "DC servo %d: %x\n", - 3 - i, val); - wm8903->dcs_cache[i] = val; - } - break; - - default: - pr_warn("DCS mode %d delay not set\n", dcs_mode); - break; - } - - wm8903->dcs_pending = 0; - } -} - /* * When used with DAC outputs only the WM8903 charge pump supports * operation in class W mode, providing very low power consumption