On some boards with multiple WSA8840/WSA8845 speakers, the reset (shutdown) GPIO is shared between two speakers. Use the reset controller framework and its "reset-gpio" driver to handle this case. This allows bring-up and proper handling of all WSA884x speakers on X1E80100-CRD board.
Cc: Bartosz Golaszewski brgl@bgdev.pl Cc: Sean Anderson sean.anderson@seco.com Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
---
If previous patches are fine, then this commit is independent and could be taken via ASoC. --- sound/soc/codecs/wsa884x.c | 53 +++++++++++++++++++++++++++++++------- 1 file changed, 43 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/wsa884x.c b/sound/soc/codecs/wsa884x.c index f2653df84e4a..a9767ef0e39d 100644 --- a/sound/soc/codecs/wsa884x.c +++ b/sound/soc/codecs/wsa884x.c @@ -13,6 +13,7 @@ #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/soundwire/sdw.h> #include <linux/soundwire/sdw_registers.h> @@ -699,6 +700,7 @@ struct wsa884x_priv { struct sdw_stream_runtime *sruntime; struct sdw_port_config port_config[WSA884X_MAX_SWR_PORTS]; struct gpio_desc *sd_n; + struct reset_control *sd_reset; bool port_prepared[WSA884X_MAX_SWR_PORTS]; bool port_enable[WSA884X_MAX_SWR_PORTS]; unsigned int variant; @@ -1799,9 +1801,22 @@ static struct snd_soc_dai_driver wsa884x_dais[] = { }, };
-static void wsa884x_gpio_powerdown(void *data) +static void wsa884x_reset_powerdown(void *data) { - gpiod_direction_output(data, 1); + struct wsa884x_priv *wsa884x = data; + + if (wsa884x->sd_reset) + reset_control_assert(wsa884x->sd_reset); + else + gpiod_direction_output(wsa884x->sd_n, 1); +} + +static void wsa884x_reset_deassert(struct wsa884x_priv *wsa884x) +{ + if (wsa884x->sd_reset) + reset_control_deassert(wsa884x->sd_reset); + else + gpiod_direction_output(wsa884x->sd_n, 0); }
static void wsa884x_regulator_disable(void *data) @@ -1809,6 +1824,27 @@ static void wsa884x_regulator_disable(void *data) regulator_bulk_disable(WSA884X_SUPPLIES_NUM, data); }
+static int wsa884x_get_reset(struct device *dev, struct wsa884x_priv *wsa884x) +{ + wsa884x->sd_reset = devm_reset_control_get_optional_shared(dev, NULL); + if (IS_ERR(wsa884x->sd_reset)) + return dev_err_probe(dev, PTR_ERR(wsa884x->sd_reset), + "Failed to get reset\n"); + else if (wsa884x->sd_reset) + return 0; + /* + * else: NULL, so use the backwards compatible way for powerdown-gpios, + * which does not handle sharing GPIO properly. + */ + wsa884x->sd_n = devm_gpiod_get_optional(dev, "powerdown", + GPIOD_OUT_HIGH); + if (IS_ERR(wsa884x->sd_n)) + return dev_err_probe(dev, PTR_ERR(wsa884x->sd_n), + "Shutdown Control GPIO not found\n"); + + return 0; +} + static int wsa884x_probe(struct sdw_slave *pdev, const struct sdw_device_id *id) { @@ -1838,11 +1874,9 @@ static int wsa884x_probe(struct sdw_slave *pdev, if (ret) return ret;
- wsa884x->sd_n = devm_gpiod_get_optional(dev, "powerdown", - GPIOD_OUT_HIGH); - if (IS_ERR(wsa884x->sd_n)) - return dev_err_probe(dev, PTR_ERR(wsa884x->sd_n), - "Shutdown Control GPIO not found\n"); + ret = wsa884x_get_reset(dev, wsa884x); + if (ret) + return ret;
dev_set_drvdata(dev, wsa884x); wsa884x->slave = pdev; @@ -1858,9 +1892,8 @@ static int wsa884x_probe(struct sdw_slave *pdev, pdev->prop.sink_dpn_prop = wsa884x_sink_dpn_prop; pdev->prop.scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
- /* Bring out of reset */ - gpiod_direction_output(wsa884x->sd_n, 0); - ret = devm_add_action_or_reset(dev, wsa884x_gpio_powerdown, wsa884x->sd_n); + wsa884x_reset_deassert(wsa884x); + ret = devm_add_action_or_reset(dev, wsa884x_reset_powerdown, wsa884x); if (ret) return ret;