On Thu, Mar 05, 2015 at 12:52:30PM -0600, Kumar Gala wrote:
On Mar 3, 2015, at 6:21 PM, Kenneth Westfield kwestfie@codeaurora.org wrote:
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt @@ -0,0 +1,49 @@ +* Qualcomm Technologies LPASS CPU DAI
+Required subnodes:
+- qcom,adsp : Audio DSP sub-node
+Optional Audio DSP subnode properties:
+- status : "disabled" indicates the adsp is not available.
What is the intent of this subnode?
From the cover letter:
Even though the ipq806x LPASS does not contain an audio DSP, other SOCs do have one. For those SOCs, the audio DSP typically controls the hardware blocks in the LPASS. Hence, different CPU DAI driver(s) would need to be used in order to facilitate audio with the DSP. As such, the LPASS DT contains an adsp subnode, which is disabled for this SOC. The same subnode should be enabled and populated for other SOCs that do contain an audio DSP. Not using the audio DSP would require different CPU DAI driver(s), in addition to possible bootloader and/or firmware changes.
This was the result of a request from Mark. See here: http://thread.gmane.org/gmane.linux.drivers.devicetree/109331/focus=11633