This patch replaces the register read with ssi->i2s_net for simplification. It also removes masking SSIEN from scr value since it's handled later by regmap_update_bits() to set this scr value back.
Signed-off-by: Nicolin Chen nicoleotsuka@gmail.com Tested-by: Caleb Crome caleb@crome.org Tested-by: Maciej S. Szmigiero mail@maciej.szmigiero.name Reviewed-by: Maciej S. Szmigiero mail@maciej.szmigiero.name --- sound/soc/fsl/fsl_ssi.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index d4f1f0d..14046c3 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -1055,9 +1055,7 @@ static int fsl_ssi_set_dai_tdm_slot(struct snd_soc_dai *dai, u32 tx_mask, }
/* The slot number should be >= 2 if using Network mode or I2S mode */ - regmap_read(regs, REG_SSI_SCR, &val); - val &= SSI_SCR_I2S_MODE_MASK | SSI_SCR_NET; - if (val && slots < 2) { + if (ssi->i2s_net && slots < 2) { dev_err(dai->dev, "slot number should be >= 2 in I2S or NET\n"); return -EINVAL; } @@ -1067,9 +1065,8 @@ static int fsl_ssi_set_dai_tdm_slot(struct snd_soc_dai *dai, u32 tx_mask, regmap_update_bits(regs, REG_SSI_SRCCR, SSI_SxCCR_DC_MASK, SSI_SxCCR_DC(slots));
- /* Save SSIEN bit of the SCR register */ + /* Save the SCR register value */ regmap_read(regs, REG_SSI_SCR, &val); - val &= SSI_SCR_SSIEN; /* Temporarily enable SSI to allow SxMSKs to be configurable */ regmap_update_bits(regs, REG_SSI_SCR, SSI_SCR_SSIEN, SSI_SCR_SSIEN);