On Fri, 12 Oct 2018 20:21:07 +0200, Brendan Shanks wrote:
I'm working on an embedded system based on an Ambarella H1 SoC (32-bit ARM Cortex A9). Audio playback through ALSA (and GStreamer) works fine when playing to the raw hw device. When playing through dshare (my normal configuration), playback stops after exactly 7 hours 16 minutes, for about 3 minutes. During the 3 minutes, the playback thread consumes an entire CPU core. After the 3 minutes, GStreamer reports an xrun, recovers from it, and playback goes back to normal.
After some debugging, the problem seems to be in snd_pcm_dshare_sync_area(). When dshare->appl_ptr rolls over to 0, 'size' becomes huge, 3036676576. 'slave_size' is also much bigger than it should be, 1258291680. This is what 'size' is set to when the for loop starts, and I believe the for loop then spends ~3 minutes copying a huge amount of samples. This also explains the 7h16m time, it's linked to the PCM boundary which is 1258291200. At 48 kHz, 1258291200 samples takes 7h16m54s.
I'm not sure what the fix should be though. Is this really a bug in dshare, or are bad values being set somewhere else? GStreamer? Or maybe the period/buffer size (480/9600) is causing problems?
Maybe some 32bit boundary overflow? I vaguely remember of it.
Takashi
Any advice is appreciated, my modified snd_pcm_dshare_sync_area() and the output are below.
Brendan Shanks
$ more /proc/asound/card0/pcm1p/sub0/hw_params access: MMAP_INTERLEAVED format: S16_LE subformat: STD channels: 4 rate: 48000 (48000/1) period_size: 480 buffer_size: 9600 $ more /proc/asound/card0/pcm1p/sub0/sw_params tstamp_mode: ENABLE period_step: 1 avail_min: 480 start_threshold: 1 stop_threshold: 1258291200 silence_threshold: 0 silence_size: 1258291200 boundary: 1258291200
--- output from running 'gst-launch-1.0 -e audiotestsrc ! alsasink' with prints included as below snd_pcm_dshare_sync_area size 3036676576, dshare->appl_ptr 0 dshare->last_appl_ptr 1258290720 slave_hw_ptr1 1258282080 slave_period_size 480 slave_hw_ptr2 1258282080 slave_buffer_size 9600 slave_hw_ptr3 1258291680 slave_boundary 1258291200 slave_hw_ptr4 1258291680 slave_appl_ptr 0 slave_size1 1258291680 size 1258291680 appl_ptr 9120 size 1258291680 boundary 1258291200 last_appl_ptr 0 slave_appl_ptr 0 dshare->slave_appl_ptr 480 exiting
snd_pcm_dshare_sync_area size 3036676576, dshare->appl_ptr 0 dshare->last_appl_ptr 1258290720 slave_hw_ptr1 8965920 slave_period_size 480 slave_hw_ptr2 8965920 slave_buffer_size 9600 slave_hw_ptr3 8975520 slave_boundary 1258291200 slave_hw_ptr4 8975520 slave_appl_ptr 8975040 slave_size1 480 size 480 appl_ptr 9120 size 480 boundary 1258291200 last_appl_ptr 0 slave_appl_ptr 8640 dshare->slave_appl_ptr 8975520 exiting
--- snd_pcm_dshare_sync_area() from alsa-lib-1.1.6 with prints added: static void snd_pcm_dshare_sync_area(snd_pcm_t *pcm) { snd_pcm_direct_t *dshare = pcm->private_data; snd_pcm_uframes_t slave_hw_ptr, slave_appl_ptr, slave_size; snd_pcm_uframes_t appl_ptr, size; const snd_pcm_channel_area_t *src_areas, *dst_areas; int print = 0;
/* calculate the size to transfer */ size = dshare->appl_ptr - dshare->last_appl_ptr; if (! size) return; if (size > 9600) { printf("snd_pcm_dshare_sync_area size %lu, dshare->appl_ptr
%lu dshare->last_appl_ptr %lu\n", size, dshare->appl_ptr, dshare->last_appl_ptr); print = 1; } slave_hw_ptr = dshare->slave_hw_ptr; if (print) printf("slave_hw_ptr1 %lu slave_period_size %lu", slave_hw_ptr, dshare->slave_period_size); /* don't write on the last active period - this area may be cleared * by the driver during write operation... */ slave_hw_ptr -= slave_hw_ptr % dshare->slave_period_size; if (print) printf("slave_hw_ptr2 %lu slave_buffer_size %lu", slave_hw_ptr, dshare->slave_buffer_size); slave_hw_ptr += dshare->slave_buffer_size; if (print) printf("slave_hw_ptr3 %lu slave_boundary %lu", slave_hw_ptr, dshare->slave_boundary); if (dshare->slave_hw_ptr > dshare->slave_boundary) slave_hw_ptr -= dshare->slave_boundary; if (print) printf("slave_hw_ptr4 %lu slave_appl_ptr %lu", slave_hw_ptr, dshare->slave_appl_ptr); if (slave_hw_ptr < dshare->slave_appl_ptr) slave_size = slave_hw_ptr + (dshare->slave_boundary - dshare->slave_appl_ptr); else slave_size = slave_hw_ptr - dshare->slave_appl_ptr; if (print) printf("slave_size1 %lu", slave_size); if (slave_size < size) size = slave_size; if (! size) return; if (print) printf("size %lu", size);
/* add sample areas here */ src_areas = snd_pcm_mmap_areas(pcm); dst_areas = snd_pcm_mmap_areas(dshare->spcm); appl_ptr = dshare->last_appl_ptr % pcm->buffer_size;
if (print) printf("appl_ptr %lu size %lu boundary %lu", appl_ptr, size, pcm->boundary); dshare->last_appl_ptr += size; dshare->last_appl_ptr %= pcm->boundary; if (print) printf("last_appl_ptr %lu", dshare->last_appl_ptr); slave_appl_ptr = dshare->slave_appl_ptr % dshare->slave_buffer_size; if (print) printf("slave_appl_ptr %lu", slave_appl_ptr); dshare->slave_appl_ptr += size; dshare->slave_appl_ptr %= dshare->slave_boundary; if (print) printf("dshare->slave_appl_ptr %lu", dshare->slave_appl_ptr); for (;;) { snd_pcm_uframes_t transfer = size; if (appl_ptr + transfer > pcm->buffer_size) transfer = pcm->buffer_size - appl_ptr; if (slave_appl_ptr + transfer > dshare->slave_buffer_size) transfer = dshare->slave_buffer_size - slave_appl_ptr; share_areas(dshare, src_areas, dst_areas, appl_ptr, slave_appl_ptr, transfer); size -= transfer; if (! size) break; slave_appl_ptr += transfer; slave_appl_ptr %= dshare->slave_buffer_size; appl_ptr += transfer; appl_ptr %= pcm->buffer_size; } if (print) printf("exiting"); _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel