This simplfies the code and slightly reduces the startup time.
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/wm8903.c | 180 +++++++++++++++------------------------------ 1 files changed, 60 insertions(+), 120 deletions(-)
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index b20611b..a5b2d07 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -251,6 +251,8 @@ static int wm8903_volatile_register(struct snd_soc_codec *codec, unsigned int re case WM8903_REVISION_NUMBER: case WM8903_INTERRUPT_STATUS_1: case WM8903_WRITE_SEQUENCER_4: + case WM8903_POWER_MANAGEMENT_3: + case WM8903_POWER_MANAGEMENT_2: return 1;
default: @@ -309,11 +311,6 @@ static void wm8903_reset(struct snd_soc_codec *codec) sizeof(wm8903_reg_defaults)); }
-#define WM8903_OUTPUT_SHORT 0x8 -#define WM8903_OUTPUT_OUT 0x4 -#define WM8903_OUTPUT_INT 0x2 -#define WM8903_OUTPUT_IN 0x1 - static int wm8903_cp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -324,99 +321,6 @@ static int wm8903_cp_event(struct snd_soc_dapm_widget *w, }
/* - * Event for headphone and line out amplifier power changes. Special - * power up/down sequences are required in order to maximise pop/click - * performance. - */ -static int wm8903_output_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - struct snd_soc_codec *codec = w->codec; - u16 val; - u16 reg; - u16 dcs_reg; - u16 dcs_bit; - int shift; - - switch (w->reg) { - case WM8903_POWER_MANAGEMENT_2: - reg = WM8903_ANALOGUE_HP_0; - dcs_bit = 0 + w->shift; - break; - case WM8903_POWER_MANAGEMENT_3: - reg = WM8903_ANALOGUE_LINEOUT_0; - dcs_bit = 2 + w->shift; - break; - default: - BUG(); - return -EINVAL; /* Spurious warning from some compilers */ - } - - switch (w->shift) { - case 0: - shift = 0; - break; - case 1: - shift = 4; - break; - default: - BUG(); - return -EINVAL; /* Spurious warning from some compilers */ - } - - if (event & SND_SOC_DAPM_PRE_PMU) { - val = snd_soc_read(codec, reg); - - /* Short the output */ - val &= ~(WM8903_OUTPUT_SHORT << shift); - snd_soc_write(codec, reg, val); - } - - if (event & SND_SOC_DAPM_POST_PMU) { - val = snd_soc_read(codec, reg); - - val |= (WM8903_OUTPUT_IN << shift); - snd_soc_write(codec, reg, val); - - val |= (WM8903_OUTPUT_INT << shift); - snd_soc_write(codec, reg, val); - - /* Turn on the output ENA_OUTP */ - val |= (WM8903_OUTPUT_OUT << shift); - snd_soc_write(codec, reg, val); - - /* Enable the DC servo */ - dcs_reg = snd_soc_read(codec, WM8903_DC_SERVO_0); - dcs_reg |= dcs_bit; - snd_soc_write(codec, WM8903_DC_SERVO_0, dcs_reg); - - /* Remove the short */ - val |= (WM8903_OUTPUT_SHORT << shift); - snd_soc_write(codec, reg, val); - } - - if (event & SND_SOC_DAPM_PRE_PMD) { - val = snd_soc_read(codec, reg); - - /* Short the output */ - val &= ~(WM8903_OUTPUT_SHORT << shift); - snd_soc_write(codec, reg, val); - - /* Disable the DC servo */ - dcs_reg = snd_soc_read(codec, WM8903_DC_SERVO_0); - dcs_reg &= ~dcs_bit; - snd_soc_write(codec, WM8903_DC_SERVO_0, dcs_reg); - - /* Then disable the intermediate and output stages */ - val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT | - WM8903_OUTPUT_IN) << shift); - snd_soc_write(codec, reg, val); - } - - return 0; -} - -/* * When used with DAC outputs only the WM8903 charge pump supports * operation in class W mode, providing very low power consumption * when used with digital sources. Enable and disable this mode @@ -918,23 +822,40 @@ SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0, SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0, right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
-SND_SOC_DAPM_PGA_E("Left Headphone Output PGA", WM8903_POWER_MANAGEMENT_2, - 1, 0, NULL, 0, wm8903_output_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_PRE_PMD), -SND_SOC_DAPM_PGA_E("Right Headphone Output PGA", WM8903_POWER_MANAGEMENT_2, - 0, 0, NULL, 0, wm8903_output_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_PRE_PMD), - -SND_SOC_DAPM_PGA_E("Left Line Output PGA", WM8903_POWER_MANAGEMENT_3, 1, 0, - NULL, 0, wm8903_output_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_PRE_PMD), -SND_SOC_DAPM_PGA_E("Right Line Output PGA", WM8903_POWER_MANAGEMENT_3, 0, 0, - NULL, 0, wm8903_output_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_PRE_PMD), +SND_SOC_DAPM_PGA_S("Left Headphone Output PGA", 0, WM8903_ANALOGUE_HP_0, + 4, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("Right Headphone Output PGA", 0, WM8903_ANALOGUE_HP_0, + 0, 0, NULL, 0), + +SND_SOC_DAPM_PGA_S("Left Line Output PGA", 0, WM8903_ANALOGUE_LINEOUT_0, 4, 0, + NULL, 0), +SND_SOC_DAPM_PGA_S("Right Line Output PGA", 0, WM8903_ANALOGUE_LINEOUT_0, 0, 0, + NULL, 0), + +SND_SOC_DAPM_PGA_S("HPL_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 7, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPL_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPL_ENA_DLY", 1, WM8903_ANALOGUE_HP_0, 5, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPR_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 3, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPR_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 2, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPR_ENA_DLY", 1, WM8903_ANALOGUE_HP_0, 1, 0, NULL, 0), + +SND_SOC_DAPM_PGA_S("LINEOUTL_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 7, 0, + NULL, 0), +SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 6, 0, + NULL, 0), +SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_DLY", 1, WM8903_ANALOGUE_LINEOUT_0, 5, 0, + NULL, 0), +SND_SOC_DAPM_PGA_S("LINEOUTR_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 3, 0, + NULL, 0), +SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 2, 0, + NULL, 0), +SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_DLY", 1, WM8903_ANALOGUE_LINEOUT_0, 1, 0, + NULL, 0), + +SND_SOC_DAPM_PGA_S("HPL_DCS", 3, WM8903_DC_SERVO_0, 3, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPR_DCS", 3, WM8903_DC_SERVO_0, 2, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("LINEOUTL_DCS", 3, WM8903_DC_SERVO_0, 1, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("LINEOUTR_DCS", 3, WM8903_DC_SERVO_0, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0, NULL, 0), @@ -1050,11 +971,30 @@ static const struct snd_soc_dapm_route intercon[] = { { "Left Speaker PGA", NULL, "Left Speaker Mixer" }, { "Right Speaker PGA", NULL, "Right Speaker Mixer" },
- { "HPOUTL", NULL, "Left Headphone Output PGA" }, - { "HPOUTR", NULL, "Right Headphone Output PGA" }, - - { "LINEOUTL", NULL, "Left Line Output PGA" }, - { "LINEOUTR", NULL, "Right Line Output PGA" }, + { "HPL_ENA_DLY", NULL, "Left Headphone Output PGA" }, + { "HPR_ENA_DLY", NULL, "Right Headphone Output PGA" }, + { "LINEOUTL_ENA_DLY", NULL, "Left Line Output PGA" }, + { "LINEOUTR_ENA_DLY", NULL, "Right Line Output PGA" }, + + { "HPL_DCS", NULL, "HPL_ENA_DLY" }, + { "HPR_DCS", NULL, "HPR_ENA_DLY" }, + { "LINEOUTL_DCS", NULL, "LINEOUTL_ENA_DLY" }, + { "LINEOUTR_DCS", NULL, "LINEOUTR_ENA_DLY" }, + + { "HPL_ENA_OUTP", NULL, "HPL_DCS" }, + { "HPR_ENA_OUTP", NULL, "HPR_DCS" }, + { "LINEOUTL_ENA_OUTP", NULL, "LINEOUTL_DCS" }, + { "LINEOUTR_ENA_OUTP", NULL, "LINEOUTR_DCS" }, + + { "HPL_RMV_SHORT", NULL, "HPL_ENA_OUTP" }, + { "HPR_RMV_SHORT", NULL, "HPR_ENA_OUTP" }, + { "LINEOUTL_RMV_SHORT", NULL, "LINEOUTL_ENA_OUTP" }, + { "LINEOUTR_RMV_SHORT", NULL, "LINEOUTR_ENA_OUTP" }, + + { "HPOUTL", NULL, "HPL_RMV_SHORT" }, + { "HPOUTR", NULL, "HPR_RMV_SHORT" }, + { "LINEOUTL", NULL, "LINEOUTL_RMV_SHORT" }, + { "LINEOUTR", NULL, "LINEOUTR_RMV_SHORT" },
{ "LOP", NULL, "Left Speaker PGA" }, { "LON", NULL, "Left Speaker PGA" },