Hey Brian,
On 31.03.2015 23:01, Brian Austin wrote:
On Tue, 31 Mar 2015, Pascal Huerst wrote:
Hey all,
We have a custom built hw, based on am335x and from time to time we need to rmmod/modprobe the ASoC machine driver. Depending on the hw, the first call to regmap_update_bits(..) in cs4271_codec_probe(..) fails with -EREMOTEIO.
The error is originated in:
drivers/i2c/busses/i2c-omap.c
and happens if no i2c package acknowledge is received by the host.
I think this is a timing issue and on some devices, the codec is just not ready yet, for communication.
What is the right way to fix that? My attempt would be something like this:
The error you are referring to is a NACK from a device (CODEC). That is usually seen when you dont have it hooked up correctly. Could also be that the I2C bus is too fast. How fast are you running the bus?
clock-frequency is set to 100000, hence 100 kHz, which should be ok, according to the datasheet.