At Tue, 18 Jun 2013 21:42:14 +0800, Wang Xingchao wrote:
For Intel Haswell HDMI codecs, the pins choose converter 0 by default. This would cause conflict when playing audio on unused pins,the pin with physical device connected would get audio data too. i.e. Pin 0/1/2 default choose converter 0, pin 1 has HDMI monitor connected. when play audio on Pin 0 or pin 2, pin 1 could get audio data too.
This patch configure unused pins to choose different converter.
Signed-off-by: Wang Xingchao xingchao.wang@linux.intel.com
sound/pci/hda/patch_hdmi.c | 91 ++++++++++++++++++++++++++++++++++++-------- 1 file changed, 76 insertions(+), 15 deletions(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 8983747..43f8b76 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1110,26 +1110,15 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid, return 0; }
-/*
- HDA PCM callbacks
- */
-static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,struct snd_pcm_substream *substream)+static int hdmi_choose_cvt(struct hda_codec *codec,
int pin_idx, int *cvt_id, int *mux_id){ struct hdmi_spec *spec = codec->spec;
- struct snd_pcm_runtime *runtime = substream->runtime;
- int pin_idx, cvt_idx, mux_idx = 0; struct hdmi_spec_per_pin *per_pin;
- struct hdmi_eld *eld; struct hdmi_spec_per_cvt *per_cvt = NULL;
- int cvt_idx, mux_idx = 0;
/* Validate hinfo */
pin_idx = hinfo_to_pin_index(spec, hinfo);
if (snd_BUG_ON(pin_idx < 0))
return -EINVAL;per_pin = get_pin(spec, pin_idx);
eld = &per_pin->sink_eld;
/* Dynamically assign converter to stream */ for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) {
@@ -1147,17 +1136,89 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, continue; break; }
/* No free converters */ if (cvt_idx == spec->num_cvts) return -ENODEV;
if (cvt_id)
*cvt_id = cvt_idx;if (mux_id)
*mux_id = mux_idx;return 0;
+}
+static void haswell_config_cvts(struct hda_codec *codec,
int pin_id, int mux_id)+{
- struct hdmi_spec *spec = codec->spec;
- struct hdmi_spec_per_pin *per_pin;
- int pin_idx, mux_idx;
- int curr;
- int err;
- for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
per_pin = get_pin(spec, pin_idx);if (pin_idx == pin_id)continue;curr = snd_hda_codec_read(codec, per_pin->pin_nid, 0,AC_VERB_GET_CONNECT_SEL, 0);/* Choose another unused converter */if (curr == mux_id) {err = hdmi_choose_cvt(codec, pin_idx, NULL, &mux_idx);if (err < 0)return;snd_printdd("HDMI: choose converter %d for pin %d\n", mux_idx, pin_idx);snd_hda_codec_write_cache(codec, per_pin->pin_nid, 0,AC_VERB_SET_CONNECT_SEL,mux_idx);}- }
+}
+/*
- HDA PCM callbacks
- */
+static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,struct snd_pcm_substream *substream)+{
- struct hdmi_spec *spec = codec->spec;
- struct snd_pcm_runtime *runtime = substream->runtime;
- int pin_idx, cvt_idx, mux_idx = 0;
- struct hdmi_spec_per_pin *per_pin;
- struct hdmi_eld *eld;
- struct hdmi_spec_per_cvt *per_cvt = NULL;
- int err;
- /* Validate hinfo */
- pin_idx = hinfo_to_pin_index(spec, hinfo);
- if (snd_BUG_ON(pin_idx < 0))
return -EINVAL;- per_pin = get_pin(spec, pin_idx);
- eld = &per_pin->sink_eld;
- err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, &mux_idx);
- if (err < 0)
return err;- per_cvt = get_cvt(spec, cvt_idx); /* Claim converter */ per_cvt->assigned = 1; hinfo->nid = per_cvt->cvt_nid;
- snd_hda_codec_write(codec, per_pin->pin_nid, 0,
- snd_hda_codec_write_cache(codec, per_pin->pin_nid, 0, AC_VERB_SET_CONNECT_SEL, mux_idx);
You shouldn't mix this fix into your patch. This change should be applied as a separate patch and go to stable kernel.
I'll cook up your patch to remove that chunk and apply the rest as is.
thanks,
Takashi