Convert bindings for TI's TLV320AIC3x audio codecs to dtschema.
There is an unknown property "adc-settle-ms" found in old dts files, which is ignored by the driver.
Signed-off-by: Jai Luthra j-luthra@ti.com Reviewed-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- .../bindings/sound/ti,tlv320aic3x.yaml | 158 ++++++++++++++++++ .../devicetree/bindings/sound/tlv320aic3x.txt | 97 ----------- 2 files changed, 158 insertions(+), 97 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml delete mode 100644 Documentation/devicetree/bindings/sound/tlv320aic3x.txt
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml new file mode 100644 index 000000000000..f0375bbf4c40 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright (C) 2022 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tlv320aic3x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320AIC3x Codec + +description: | + TLV320AIC3x are a series of low-power stereo audio codecs with stereo + headphone amplifier, as well as multiple inputs and outputs programmable in + single-ended or fully differential configurations. + + The serial control bus supports SPI or I2C protocols, while the serial audio + data bus is programmable for I2S, left/right-justified, DSP, or TDM modes. + + The following pins can be referred in the sound node's audio routing property: + + CODEC output pins: + LLOUT + RLOUT + MONO_LOUT + HPLOUT + HPROUT + HPLCOM + HPRCOM + + CODEC input pins for TLV320AIC3104: + MIC2L + MIC2R + LINE1L + LINE1R + + CODEC input pins for other compatible codecs: + MIC3L + MIC3R + LINE1L + LINE2L + LINE1R + LINE2R + +maintainers: + - Jai Luthra j-luthra@ti.com + +properties: + compatible: + enum: + - ti,tlv320aic3x + - ti,tlv320aic33 + - ti,tlv320aic3007 + - ti,tlv320aic3106 + - ti,tlv320aic3104 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: + GPIO specification for the active low RESET input. + + gpio-reset: + maxItems: 1 + description: + Deprecated, please use reset-gpios instead. + deprecated: true + + ai3x-gpio-func: + description: AIC3X_GPIO1 & AIC3X_GPIO2 Functionality + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + + ai3x-micbias-vg: + description: MicBias required voltage. If node is omitted then MicBias is powered down. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - const: 1 + description: MICBIAS output is powered to 2.0V. + - const: 2 + description: MICBIAS output is powered to 2.5V. + - const: 3 + description: MICBIAS output is connected to AVDD. + + ai3x-ocmv: + description: Output Common-Mode Voltage selection. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - const: 0 + description: 1.35V + - const: 1 + description: 1.5V + - const: 2 + description: 1.65V + - const: 3 + description: 1.8V + + AVDD-supply: + description: Analog DAC voltage. + + IOVDD-supply: + description: I/O voltage. + + DRVDD-supply: + description: ADC analog and output driver voltage. + + DVDD-supply: + description: Digital core voltage. + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tlv320aic3x_i2c: audio-codec@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + + reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + + AVDD-supply = <®ulator>; + IOVDD-supply = <®ulator>; + DRVDD-supply = <®ulator>; + DVDD-supply = <®ulator>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + tlv320aic3x_spi: audio-codec@0 { + compatible = "ti,tlv320aic3x"; + reg = <0>; /* CS number */ + #sound-dai-cells = <0>; + + AVDD-supply = <®ulator>; + IOVDD-supply = <®ulator>; + DRVDD-supply = <®ulator>; + DVDD-supply = <®ulator>; + ai3x-ocmv = <0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt deleted file mode 100644 index 20931a63fd64..000000000000 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ /dev/null @@ -1,97 +0,0 @@ -Texas Instruments - tlv320aic3x Codec module - -The tlv320aic3x serial control bus communicates through both I2C and SPI bus protocols - -Required properties: - -- compatible - "string" - One of: - "ti,tlv320aic3x" - Generic TLV320AIC3x device - "ti,tlv320aic33" - TLV320AIC33 - "ti,tlv320aic3007" - TLV320AIC3007 - "ti,tlv320aic3106" - TLV320AIC3106 - "ti,tlv320aic3104" - TLV320AIC3104 - - -- reg - <int> - I2C slave address - - -Optional properties: - -- reset-gpios - GPIO specification for the active low RESET input. -- ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality - - Not supported on tlv320aic3104 -- ai3x-micbias-vg - MicBias Voltage required. - 1 - MICBIAS output is powered to 2.0V, - 2 - MICBIAS output is powered to 2.5V, - 3 - MICBIAS output is connected to AVDD, - If this node is not mentioned or if the value is incorrect, then MicBias - is powered down. -- ai3x-ocmv - Output Common-Mode Voltage selection: - 0 - 1.35V, - 1 - 1.5V, - 2 - 1.65V, - 3 - 1.8V -- AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the - device as covered in Documentation/devicetree/bindings/regulator/regulator.txt - -Deprecated properties: - -- gpio-reset - gpio pin number used for codec reset - -CODEC output pins: - * LLOUT - * RLOUT - * MONO_LOUT - * HPLOUT - * HPROUT - * HPLCOM - * HPRCOM - -CODEC input pins for TLV320AIC3104: - * MIC2L - * MIC2R - * LINE1L - * LINE1R - -CODEC input pins for other compatible codecs: - * MIC3L - * MIC3R - * LINE1L - * LINE2L - * LINE1R - * LINE2R - -The pins can be used in referring sound node's audio-routing property. - -I2C example: - -#include <dt-bindings/gpio/gpio.h> - -tlv320aic3x: tlv320aic3x@1b { - compatible = "ti,tlv320aic3x"; - reg = <0x1b>; - - reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - - AVDD-supply = <®ulator>; - IOVDD-supply = <®ulator>; - DRVDD-supply = <®ulator>; - DVDD-supply = <®ulator>; -}; - -SPI example: - -spi0: spi@f0000000 { - tlv320aic3x: codec@0 { - compatible = "ti,tlv320aic3x"; - reg = <0>; /* CS number */ - #sound-dai-cells = <0>; - spi-max-frequency = <1000000>; - - AVDD-supply = <®ulator>; - IOVDD-supply = <®ulator>; - DRVDD-supply = <®ulator>; - DVDD-supply = <®ulator>; - ai3x-ocmv = <0>; - }; -};