The probe already stores pointer to &pdev->dev, so use it to make the code a bit easier to read.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- sound/soc/codecs/wsa883x.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c index 966ba4909204..8d69ed340e83 100644 --- a/sound/soc/codecs/wsa883x.c +++ b/sound/soc/codecs/wsa883x.c @@ -1375,7 +1375,7 @@ static int wsa883x_probe(struct sdw_slave *pdev, struct device *dev = &pdev->dev; int ret;
- wsa883x = devm_kzalloc(&pdev->dev, sizeof(*wsa883x), GFP_KERNEL); + wsa883x = devm_kzalloc(dev, sizeof(*wsa883x), GFP_KERNEL); if (!wsa883x) return -ENOMEM;
@@ -1388,17 +1388,17 @@ static int wsa883x_probe(struct sdw_slave *pdev, if (ret) return dev_err_probe(dev, ret, "Failed to enable vdd regulator\n");
- wsa883x->sd_n = devm_gpiod_get_optional(&pdev->dev, "powerdown", + wsa883x->sd_n = devm_gpiod_get_optional(dev, "powerdown", GPIOD_FLAGS_BIT_NONEXCLUSIVE | GPIOD_OUT_HIGH); if (IS_ERR(wsa883x->sd_n)) { - ret = dev_err_probe(&pdev->dev, PTR_ERR(wsa883x->sd_n), + ret = dev_err_probe(dev, PTR_ERR(wsa883x->sd_n), "Shutdown Control GPIO not found\n"); goto err; }
- dev_set_drvdata(&pdev->dev, wsa883x); + dev_set_drvdata(dev, wsa883x); wsa883x->slave = pdev; - wsa883x->dev = &pdev->dev; + wsa883x->dev = dev; wsa883x->sconfig.ch_count = 1; wsa883x->sconfig.bps = 1; wsa883x->sconfig.direction = SDW_DATA_DIR_RX; @@ -1413,7 +1413,7 @@ static int wsa883x_probe(struct sdw_slave *pdev, wsa883x->regmap = devm_regmap_init_sdw(pdev, &wsa883x_regmap_config); if (IS_ERR(wsa883x->regmap)) { gpiod_direction_output(wsa883x->sd_n, 1); - ret = dev_err_probe(&pdev->dev, PTR_ERR(wsa883x->regmap), + ret = dev_err_probe(dev, PTR_ERR(wsa883x->regmap), "regmap_init failed\n"); goto err; } @@ -1423,7 +1423,7 @@ static int wsa883x_probe(struct sdw_slave *pdev, pm_runtime_set_active(dev); pm_runtime_enable(dev);
- ret = devm_snd_soc_register_component(&pdev->dev, + ret = devm_snd_soc_register_component(dev, &wsa883x_component_drv, wsa883x_dais, ARRAY_SIZE(wsa883x_dais));