Attempt to change McBSP CLKS source while another stream is active is not safe after commit d135865 ("OMAP: McBSP: implement functional clock switching via clock framework") in 2.6.37.
CLKS parent clock switching using clock framework have to idle the McBSP before switching and then activate it again. This short break can cause a DMA transaction error to already running stream which halts and recovers only by closing and restarting the stream.
This goes more fatal after commit e2fa61d ("OMAP3: l3: Introduce l3-interconnect error handling driver") in 2.6.39 where l3 driver detects a severe timeout error and does BUG_ON().
Fix this by checking is the McBSP active in omap_mcbsp_dai_set_dai_sysclk before attempting to change any clocking configuration. This test should have been here just from the beginning anyway.
Signed-off-by: Jarkko Nikula jhnikula@gmail.com Cc: stable@kernel.org --- For 2.6.37 and onward.
This issue is valid to those machine drivers that use the McBSP as a DAI link master and are configuring the CLKS source (like sound/soc/omap/omap3pandora.c in mainline). --- sound/soc/omap/omap-mcbsp.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 07b7723..fc896c1 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -516,6 +516,9 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs; int err = 0;
+ if (mcbsp_data->active) + return 0; + /* The McBSP signal muxing functions are only available on McBSP1 */ if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR || clk_id == OMAP_MCBSP_CLKR_SRC_CLKX ||