Hi Shawn,
On Mon, Sep 17, 2012 at 01:34:29PM +0800, Shawn Guo wrote:
The series enables multi-platform support for imx. Since the required frameworks (clk, pwm) and spare_irq have already been adopted on imx, the series is all about cleaning up mach/* headers. Along with the changes, arch/arm/plat-mxc gets merged into arch/arm/mach-imx.
It's based on a bunch of branches (works from others), Rob's initial multi-platform series, Arnd's platform-data and smp_ops (Marc's) and imx 3.7 material (Sascha and myself).
It's available on branch below.
git://git.linaro.org/people/shawnguo/linux-2.6.git imx/multi-platform
It's been tested on imx5 and imx6, and only compile-tested on imx2 and imx3, so testing on imx2/3 are appreciated.
Subsystem maintainers,
I plan to send the whole series via arm-soc tree at the end of 3.7 merge window when all dependant bits hit mainline. Please have a look at the patches you get copied and provide ACKs if the changes are good. Thanks.
I just had a look at the remaining initcalls in arch-imx. Most of them are protected with a cpu_is_*, but this one should be fixed before i.MX is enabled for multi platform:
arch/arm/mach-imx/devices/devices.c:48:core_initcall(mxc_device_init);
I think this won't harm others directly, but it will register i.MX related devices on foreign platforms.
Sascha