On Sat, May 03, 2014 at 08:30:11PM +0200, Andrew Lunn wrote:
Let the ALC5623 codec be instantiated from DT. Add a simple binding for the additional control register and the jack detect register.
Also, add a prompt to the Kconfig entry for this CODEC, so that it can be selected. Since kirkwood-t5325.c will no longer be used, we need to be able to enable the CODEC in the mvebu_v5_defconfig etc.
Signed-off-by: Andrew Lunn andrew@lunn.ch
I followed the example of the WM8903 binding which allows register values to be placed into DT.
v1->v2:
Add redundant OF ID table. Fix binding documentation. Fix check of return code from of_property_read_u32(). Add Kconfig prompt
.../devicetree/bindings/sound/alc5623.txt | 25 ++++++++++++++++++++++ sound/soc/codecs/Kconfig | 2 +- sound/soc/codecs/alc5623.c | 20 +++++++++++++++++ 3 files changed, 46 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/sound/alc5623.txt
I assume Mark is going to take this through his tree.
Acked-by: Jason Cooper jason@lakedaemon.net
thx,
Jason.