From: Jeeja KP jeeja.kp@intel.com
To configure a module, driver needs to send input and output PCM params for a module in DSP. The FE PCM params come from hw_params ie from user, for a BE they also come from hw_params but from BE-link fixups. So based on PCM params required driver has to find a converter module (src/updown/format) and then do the conversion and calculate PCM params in these pipelines In this patch we add the helper modules which allow driver to do these calculations.
Signed-off-by: Hardik T Shah hardik.t.shah@intel.com Signed-off-by: Jeeja KP jeeja.kp@intel.com Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com --- sound/soc/intel/skylake/skl-topology.c | 126 +++++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+)
diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 6d0eee6a04ff..81b0683bbdeb 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -27,6 +27,10 @@ #include "skl.h" #include "skl-tplg-interface.h"
+#define SKL_CH_FIXUP_MASK (1 << 0) +#define SKL_RATE_FIXUP_MASK (1 << 1) +#define SKL_FMT_FIXUP_MASK (1 << 2) + /* * SKL DSP driver modelling uses only few DAPM widgets so for rest we will * ignore. This helpers checks if the SKL driver handles this widget type @@ -115,6 +119,126 @@ static bool skl_tplg_is_pipe_mcps_available(struct skl *skl, return true; }
+static void skl_dump_mconfig(struct skl_sst *ctx, + struct skl_module_cfg *mcfg) +{ + dev_dbg(ctx->dev, "Dumping config\n"); + dev_dbg(ctx->dev, "Input Format:\n"); + dev_dbg(ctx->dev, "channels = %d\n", mcfg->in_fmt.channels); + dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->in_fmt.s_freq); + dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->in_fmt.ch_cfg); + dev_dbg(ctx->dev, "valid bit depth = %d\n", mcfg->in_fmt.valid_bit_depth); + dev_dbg(ctx->dev, "Output Format:\n"); + dev_dbg(ctx->dev, "channels = %d\n", mcfg->out_fmt.channels); + dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->out_fmt.s_freq); + dev_dbg(ctx->dev, "valid bit depth = %d\n", mcfg->out_fmt.valid_bit_depth); + dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->out_fmt.ch_cfg); +} + +static void skl_tplg_update_params(struct skl_module_fmt *fmt, + struct skl_pipe_params *params, int fixup) +{ + if (fixup & SKL_RATE_FIXUP_MASK) + fmt->s_freq = params->s_freq; + if (fixup & SKL_CH_FIXUP_MASK) + fmt->channels = params->ch; + if (fixup & SKL_FMT_FIXUP_MASK) + fmt->valid_bit_depth = params->s_fmt; +} + +/* + * A pipeline may have modules which impact the pcm parameters, like SRC, + * channel converter, format converter. + * We need to calculate the output params by applying the 'fixup' + * Topology will tell driver which type of fixup is to be applied by + * supplying the fixup mask, so based on that we calculate the output + * + * Now In FE the pcm hw_params is source/target format. Same is applicable + * for BE with its hw_params invoked. + * here based on FE, BE pipeline and direction we calculate the input and + * outfix and then apply that for a module + */ +static void skl_tplg_update_params_fixup(struct skl_module_cfg *m_cfg, + struct skl_pipe_params *params, bool is_fe) +{ + int in_fixup, out_fixup; + struct skl_module_fmt *in_fmt, *out_fmt; + + in_fmt = &m_cfg->in_fmt; + out_fmt = &m_cfg->out_fmt; + + if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) { + if (is_fe) { + in_fixup = m_cfg->params_fixup; + out_fixup = (~m_cfg->converter) & m_cfg->params_fixup; + } else { + out_fixup = m_cfg->params_fixup; + in_fixup = (~m_cfg->converter) & m_cfg->params_fixup; + } + } else { + if (is_fe) { + out_fixup = m_cfg->params_fixup; + in_fixup = (~m_cfg->converter) & m_cfg->params_fixup; + } else { + in_fixup = m_cfg->params_fixup; + out_fixup = (~m_cfg->converter) & m_cfg->params_fixup; + } + } + + skl_tplg_update_params(in_fmt, params, in_fixup); + skl_tplg_update_params(out_fmt, params, out_fixup); +} + +/* + * A module needs input and output buffers, which are dependent upon pcm + * params, so once we have calculate params, we need buffer calculation as + * well. + */ +static void skl_tplg_update_buffer_size(struct skl_sst *ctx, + struct skl_module_cfg *mcfg) +{ + int multiplier = 1; + + if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT) + multiplier = 5; + + mcfg->ibs = (mcfg->in_fmt.s_freq / 1000) * + (mcfg->in_fmt.channels) * + (mcfg->in_fmt.bit_depth >> 3) * + multiplier; + + mcfg->obs = (mcfg->out_fmt.s_freq / 1000) * + (mcfg->out_fmt.channels) * + (mcfg->out_fmt.bit_depth >> 3) * + multiplier; +} + +static void skl_tplg_update_module_params(struct snd_soc_dapm_widget *w, + struct skl_sst *ctx) +{ + struct skl_module_cfg *m_cfg = w->priv; + struct skl_pipe_params *params = m_cfg->pipe->p_params; + int p_conn_type = m_cfg->pipe->conn_type; + bool is_fe; + + if (!m_cfg->params_fixup) + return; + + dev_dbg(ctx->dev, "Mconfig for widget=%s BEFORE updation\n", w->name); + skl_dump_mconfig(ctx, m_cfg); + + if (p_conn_type == SKL_PIPE_CONN_TYPE_FE) + is_fe = true; + else + is_fe = false; + + skl_tplg_update_params_fixup(m_cfg, params, is_fe); + skl_tplg_update_buffer_size(ctx, m_cfg); + + dev_dbg(ctx->dev, "Mconfig for widget=%s AFTER updation\n", w->name); + skl_dump_mconfig(ctx, m_cfg); +} + /* * A pipe can have multiple modules each of the will be a DAPM widget as * well. While managing a pipeline we need to get the list of all the @@ -175,6 +299,8 @@ static int skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe) if (!skl_tplg_is_pipe_mcps_available(skl, mconfig)) return -ENOMEM;
+ /* apply fix/conversion to module params based on FE/BE params*/ + skl_tplg_update_module_params(w, ctx); ret = skl_init_module(ctx, mconfig, NULL); if (ret < 0) return ret;