From: Srinivas Kandagatla srinivas.kandagatla@linaro.org
This patch add new bindings required to support MBHC (Multi Button Headset Control) block in the codec. This block is used for jack insert/removal detection, headset type detection and 8 button press/release events.
All these properties are very much specific to board.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- .../devicetree/bindings/sound/qcom,wcd9335.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt index 5d6ea66..a95a8b4 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt +++ b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt @@ -55,6 +55,26 @@ Required properties with SLIMbus Interface: Value type: <string> Definition: Must contain "mclk", "mclk2" and "slimbus" strings.
+- qcom,mbhc-vthreshold-millivolt: + Usage: Optional, only required if headset button support required. + Value type: <u32 array> + Definition: Must contain an array of 8 threshold voltages in mV for + 8 buttons detection on headset. + +- qcom,hphl-jack-type-normally-open: + Usage: Optional, only required if headset button support required. + Value type: <boolean> + Definition: present if hphl pin on jack is a NO (Normally Open). + If not specified, then its assumed that hphl pin on jack + is NC (Normally Closed). + +- qcom,gnd-jack-type-normally-open: + Usage: Optional, only required if headset button support required. + Value type: <boolean> + Definition: present if gnd pin on jack is NO (Normally Open). + If not specified, then its assumed that gnd pin on + jack is NC (Normally Closed). + - vdd-buck-supply: Usage: required Value type: <phandle>