Set "Speaker Force Firmware Load" as the common kcontrol for both tas27871 and tas2563 and move it into newly-created tasdevice_snd_controls, and keep the digital gain and analog gain in tas2781_snd_controls.
Signed-off-by: Shenghao Ding shenghao-ding@ti.com
--- v1: - Rename driver_name from tas2781-codec to tasdev-codec, request from some tas2563 users since the driver supports both tas2563 and tas2781, the drvier name seemed unfair to tas2563. - Set "Speaker Force Firmware Load" as the common kcontrol for both tas27871 and tas2563 and move it into newly-created tasdevice_snd_controls. --- sound/soc/codecs/tas2781-i2c.c | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index e0e630f66101..b412f8f2e5d5 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -104,7 +104,7 @@ static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, return tasdevice_amp_putvol(tas_priv, ucontrol, mc); }
-static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol, +static int tasdev_force_fwload_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_component *component = @@ -119,7 +119,7 @@ static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol, return 0; }
-static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, +static int tasdev_force_fwload_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_component *component = @@ -140,6 +140,11 @@ static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, return change; }
+static const struct snd_kcontrol_new tasdevice_snd_controls[] = { + SOC_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, + tasdev_force_fwload_get, tasdev_force_fwload_put), +}; + static const struct snd_kcontrol_new tas2781_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain", TAS2781_AMP_LEVEL, 1, 0, 20, 0, tas2781_amp_getvol, @@ -147,8 +152,6 @@ static const struct snd_kcontrol_new tas2781_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain", TAS2781_DVC_LVL, 0, 0, 200, 1, tas2781_digital_getvol, tas2781_digital_putvol, dvc_tlv), - SOC_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, - tas2781_force_fwload_get, tas2781_force_fwload_put), };
static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, @@ -590,6 +593,18 @@ static struct snd_soc_dai_driver tasdevice_dai_driver[] = { static int tasdevice_codec_probe(struct snd_soc_component *codec) { struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + int rc; + + if (tas_priv->chip_id == TAS2781) { + rc = snd_soc_add_component_controls(codec, + tas2781_snd_controls, + ARRAY_SIZE(tas2781_snd_controls)); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: Add control err rc = %d", + __func__, rc); + return rc; + } + }
tas_priv->name_prefix = codec->name_prefix; return tascodec_init(tas_priv, codec, THIS_MODULE, tasdevice_fw_ready); @@ -617,8 +632,8 @@ static const struct snd_soc_component_driver soc_codec_driver_tasdevice = { .probe = tasdevice_codec_probe, .remove = tasdevice_codec_remove, - .controls = tas2781_snd_controls, - .num_controls = ARRAY_SIZE(tas2781_snd_controls), + .controls = tasdevice_snd_controls, + .num_controls = ARRAY_SIZE(tasdevice_snd_controls), .dapm_widgets = tasdevice_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), .dapm_routes = tasdevice_audio_map, @@ -759,7 +774,7 @@ MODULE_DEVICE_TABLE(acpi, tasdevice_acpi_match);
static struct i2c_driver tasdevice_i2c_driver = { .driver = { - .name = "tas2781-codec", + .name = "tasdev-codec", .of_match_table = of_match_ptr(tasdevice_of_match), #ifdef CONFIG_ACPI .acpi_match_table = ACPI_PTR(tasdevice_acpi_match),