In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue.
This commit replaces the check with the substream count and the value for the size of PCM period.
Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp --- sound/firewire/bebob/bebob_pcm.c | 39 ++++++++++++++++++++++---------- 1 file changed, 27 insertions(+), 12 deletions(-)
diff --git a/sound/firewire/bebob/bebob_pcm.c b/sound/firewire/bebob/bebob_pcm.c index 3b2227abf8a9..516c9874f4a1 100644 --- a/sound/firewire/bebob/bebob_pcm.c +++ b/sound/firewire/bebob/bebob_pcm.c @@ -129,18 +129,17 @@ pcm_init_hw_params(struct snd_bebob *bebob, return err; }
-static int -pcm_open(struct snd_pcm_substream *substream) +static int pcm_open(struct snd_pcm_substream *substream) { struct snd_bebob *bebob = substream->private_data; const struct snd_bebob_rate_spec *spec = bebob->spec->rate; - unsigned int sampling_rate; + struct amdtp_domain *d = &bebob->domain; enum snd_bebob_clock_type src; int err;
err = snd_bebob_stream_lock_try(bebob); if (err < 0) - goto end; + return err;
err = pcm_init_hw_params(bebob, substream); if (err < 0) @@ -150,15 +149,19 @@ pcm_open(struct snd_pcm_substream *substream) if (err < 0) goto err_locked;
- /* - * When source of clock is internal or any PCM stream are running, - * the available sampling rate is limited at current sampling rate. - */ + mutex_lock(&bebob->mutex); + + // When source of clock is not internal or any stream is reserved for + // transmission of PCM frames, the available sampling rate is limited + // at current one. if (src == SND_BEBOB_CLOCK_TYPE_EXTERNAL || - amdtp_stream_pcm_running(&bebob->tx_stream) || - amdtp_stream_pcm_running(&bebob->rx_stream)) { + (bebob->substreams_counter > 0 && d->events_per_period > 0)) { + unsigned int frames_per_period = d->events_per_period; + unsigned int sampling_rate; + err = spec->get(bebob, &sampling_rate); if (err < 0) { + mutex_unlock(&bebob->mutex); dev_err(&bebob->unit->device, "fail to get sampling rate: %d\n", err); goto err_locked; @@ -166,11 +169,23 @@ pcm_open(struct snd_pcm_substream *substream)
substream->runtime->hw.rate_min = sampling_rate; substream->runtime->hw.rate_max = sampling_rate; + + if (frames_per_period > 0) { + err = snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_PERIOD_SIZE, + frames_per_period, frames_per_period); + if (err < 0) { + mutex_unlock(&bebob->mutex); + goto err_locked; + } + } }
+ mutex_unlock(&bebob->mutex); + snd_pcm_set_sync(substream); -end: - return err; + + return 0; err_locked: snd_bebob_stream_lock_release(bebob); return err;