This removes the SoC-specific dependencies on the platform drivers, as well as SoC-specific selections of platform drivers for the machine drivers. The rationale behind this change is that the dependencies are not actual build dependencies but run-time ones.
The previously listed SoCs were also incomplete: for instance, tegra124 uses the tegra30 platform drivers, which could not be built without ARCH_TEGRA_3x_SOC set.
Descriptions of the tristates are also added to allow these options to be set via defconfig/menuconfig.
Signed-off-by: Paul Kocialkowski contact@paulk.fr --- sound/soc/tegra/Kconfig | 42 ++++++++++++++---------------------------- 1 file changed, 14 insertions(+), 28 deletions(-)
diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig index efbe8d4c019e..6875fc39a575 100644 --- a/sound/soc/tegra/Kconfig +++ b/sound/soc/tegra/Kconfig @@ -9,8 +9,8 @@ config SND_SOC_TEGRA Say Y or M here if you want support for SoC audio on Tegra.
config SND_SOC_TEGRA20_AC97 - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + tristate "Tegra20 AC97 interface" + depends on SND_SOC_TEGRA select SND_SOC_AC97_BUS select SND_SOC_TEGRA20_DAS help @@ -19,16 +19,16 @@ config SND_SOC_TEGRA20_AC97 machine drivers to support below.
config SND_SOC_TEGRA20_DAS - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + tristate "Tegra20 DAS module" + depends on SND_SOC_TEGRA help Say Y or M if you want to add support for the Tegra20 DAS module. You will also need to select the individual machine drivers to support below.
config SND_SOC_TEGRA20_I2S - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + tristate "Tegra20 I2S interface" + depends on SND_SOC_TEGRA select SND_SOC_TEGRA20_DAS help Say Y or M if you want to add support for codecs attached to the @@ -36,8 +36,8 @@ config SND_SOC_TEGRA20_I2S machine drivers to support below.
config SND_SOC_TEGRA20_SPDIF - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + tristate "Tegra20 SPDIF interface" + depends on SND_SOC_TEGRA default m help Say Y or M if you want to add support for the Tegra20 SPDIF interface. @@ -45,16 +45,16 @@ config SND_SOC_TEGRA20_SPDIF below.
config SND_SOC_TEGRA30_AHUB - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC + tristate "Tegra30 AHUB module" + depends on SND_SOC_TEGRA help - Say Y or M if you want to add support for the Tegra20 AHUB module. + Say Y or M if you want to add support for the Tegra30 AHUB module. You will also need to select the individual machine drivers to support below.
config SND_SOC_TEGRA30_I2S - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC + tristate "Tegra30 I2S interface" + depends on SND_SOC_TEGRA select SND_SOC_TEGRA30_AHUB help Say Y or M if you want to add support for codecs attached to the @@ -64,8 +64,6 @@ config SND_SOC_TEGRA30_I2S config SND_SOC_TEGRA_RT5640 tristate "SoC Audio support for Tegra boards using an RT5640 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_RT5640 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -74,8 +72,6 @@ config SND_SOC_TEGRA_RT5640 config SND_SOC_TEGRA_WM8753 tristate "SoC Audio support for Tegra boards using a WM8753 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_WM8753 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -84,8 +80,6 @@ config SND_SOC_TEGRA_WM8753 config SND_SOC_TEGRA_WM8903 tristate "SoC Audio support for Tegra boards using a WM8903 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_WM8903 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -94,7 +88,7 @@ config SND_SOC_TEGRA_WM8903
config SND_SOC_TEGRA_WM9712 tristate "SoC Audio support for Tegra boards using a WM9712 codec" - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC && GPIOLIB + depends on SND_SOC_TEGRA && GPIOLIB select SND_SOC_TEGRA20_AC97 select SND_SOC_WM9712 help @@ -104,7 +98,6 @@ config SND_SOC_TEGRA_WM9712 config SND_SOC_TEGRA_TRIMSLICE tristate "SoC Audio support for TrimSlice board" depends on SND_SOC_TEGRA && I2C - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TLV320AIC23_I2C help Say Y or M here if you want to add support for SoC audio on the @@ -113,7 +106,6 @@ config SND_SOC_TEGRA_TRIMSLICE config SND_SOC_TEGRA_ALC5632 tristate "SoC Audio support for Tegra boards using an ALC5632 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_ALC5632 help Say Y or M here if you want to add support for SoC audio on the @@ -122,8 +114,6 @@ config SND_SOC_TEGRA_ALC5632 config SND_SOC_TEGRA_MAX98090 tristate "SoC Audio support for Tegra boards using a MAX98090 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_MAX98090 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -132,8 +122,6 @@ config SND_SOC_TEGRA_MAX98090 config SND_SOC_TEGRA_RT5677 tristate "SoC Audio support for Tegra boards using a RT5677 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_RT5677 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -142,8 +130,6 @@ config SND_SOC_TEGRA_RT5677 config SND_SOC_TEGRA_SGTL5000 tristate "SoC Audio support for Tegra boards using a SGTL5000 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_SGTL5000 help Say Y or M here if you want to add support for SoC audio on Tegra