17.10.2019 19:23, Ben Dooks пишет:
On 08/10/2019 16:29, Dmitry Osipenko wrote:
Hello Ben,
07.10.2019 18:31, Ben Dooks пишет:
From: Edward Cragg edward.cragg@codethink.co.uk
The CIF configuration and clock setting is currently hard coded for 2 channels. Since the hardware is capable of supporting 1-8 channels add support for reading the channel count from the supplied parameters to allow for better TDM support. It seems the original implementation of this driver was fixed at 2 channels for simplicity, and not implementing TDM.
Signed-off-by: Edward Cragg edward.cragg@codethink.co.uk [ben.dooks@codethink.co.uk: added is_tdm and channel nr check] [ben.dooks@codethink.co.uk: merge edge control into set-format] [ben.dooks@codethink.co.uk: removed is_tdm and moved edge to hw_params] Signed-off-by: Ben Dooks ben.dooks@codethink.co.uk
sound/soc/tegra/tegra30_i2s.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c index 063f34c882af..7382f7949bf4 100644 --- a/sound/soc/tegra/tegra30_i2s.c +++ b/sound/soc/tegra/tegra30_i2s.c @@ -67,6 +67,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai, { struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai); unsigned int mask = 0, val = 0; + unsigned int ch_mask, ch_val = 0; switch (fmt & SND_SOC_DAIFMT_INV_MASK) { case SND_SOC_DAIFMT_NB_NF: @@ -75,6 +76,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai, return -EINVAL; } + ch_mask = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_MASK; mask |= TEGRA30_I2S_CTRL_MASTER_ENABLE; switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBS_CFS: @@ -90,10 +92,12 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai, TEGRA30_I2S_CTRL_LRCK_MASK; switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_DSP_A: + ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE; val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_FSYNC; val |= TEGRA30_I2S_CTRL_LRCK_L_LOW; break; case SND_SOC_DAIFMT_DSP_B: + ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
Downstream code sets DSP_B to POS_EDGE, looks like you have a typo here. Or does DSP_B happen to work with the NEG_EDGE?
ok, will change, we've only been using SND_SOC_DAIFMT_DSP_A
For reference, is there a git repo with this version of tegra tdm support?
Looks like all downstream kernels that supported T30 are doing the same thing.
Take a look here for example:
https://nv-tegra.nvidia.com/gitweb/?p=linux-3.10.git;a=commit;h=49834eef9d51...