Hi Marc,
On 03/10/2013 01:19 PM, Marc Schultz wrote:
Hey ALSA-Devel community,
I'm successfully booting a Buildroot made Linux image on my board. This board has an Cirrus Logic CS4270 sound chip and now I want to activate the specific sound card driver for it. Is there a good way to put the CS4270 driver files into the Linux Kernel folders of Buildroot to get them compressed into the Linux image or do I have to go one of the following ways after booting the image on my target hardware?
http://www.alsa-project.org/main/index.php/Matrix:Module-cs4270
http://www.alsa-project.org/main/index.php/Driver_Compilation)
Do you have a good workflow for me to get this thing working?
Long story short... making this work is /very/ board-specific. If someone hasn't already done the work for your specific board -- doing the work isn't trivial. It's not like PC's where the sound card is on the PCI bus and you simply have to load the driver module. Someone experienced in ASoC and board bring-up would spend anywhere from 2 days to a week to do this board-specific integration work.
If you're starting from less, then the lower estimate is "weeks."
So, if you're up for the journey... here's some starting points...
Start here: Documentation/sound/alsa/soc/*
One example of this kind of integration can be found for the BeagleBoard:
arch/arm/mach-omap2/board-omap3beagle.c (board file) sound/soc/omap/omap-twl4030.c (ASoC machine driver)
Each component will need board-specific platform data added to the board file (or device tree), and a machine driver will be needed to glue together the audio components (CPU platform + CPU Driver + Audio Codec) into a "sound card".
-gabriel