Convert the PM8916 analog WCD codec bindings to YAML.
Signed-off-by: Konrad Dybcio konrad.dybcio@linaro.org --- .../bindings/sound/qcom,msm8916-wcd-analog.txt | 101 ------------- .../sound/qcom,pm8916-wcd-analog-codec.yaml | 160 +++++++++++++++++++++ 2 files changed, 160 insertions(+), 101 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt deleted file mode 100644 index e7d17dda55db..000000000000 --- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt +++ /dev/null @@ -1,101 +0,0 @@ -msm8916 analog audio CODEC - -Bindings for codec Analog IP which is integrated in pmic pm8916, - -## Bindings for codec core on pmic: - -Required properties - - compatible = "qcom,pm8916-wcd-analog-codec"; - - reg: represents the slave base address provided to the peripheral. - - interrupts: List of interrupts in given SPMI peripheral. - - interrupt-names: Names specified to above list of interrupts in same - order. List of supported interrupt names are: - "cdc_spk_cnp_int" - Speaker click and pop interrupt. - "cdc_spk_clip_int" - Speaker clip interrupt. - "cdc_spk_ocp_int" - Speaker over current protect interrupt. - "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1. - "mbhc_but_rel_det" - button release interrupt. - "mbhc_but_press_det" - button press event - "mbhc_ins_rem_det" - jack insert removal detect interrupt. - "mbhc_switch_int" - multi button headset interrupt. - "cdc_ear_ocp_int" - Earphone over current protect interrupt. - "cdc_hphr_ocp_int" - Headphone R over current protect interrupt. - "cdc_hphl_ocp_det" - Headphone L over current protect interrupt. - "cdc_ear_cnp_int" - earphone cnp interrupt. - "cdc_hphr_cnp_int" - hphr click and pop interrupt. - "cdc_hphl_cnp_int" - hphl click and pop interrupt. - - - clocks: Handle to mclk. - - clock-names: should be "mclk" - - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node. - - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node. - - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node. - -Optional Properties: - - qcom,mbhc-vthreshold-low: Array of 5 threshold voltages in mV for 5 buttons - detection on headset when the mbhc is powered up - by internal current source, this is a low power. - - qcom,mbhc-vthreshold-high: Array of 5 thresold voltages in mV for 5 buttons - detection on headset when mbhc is powered up - from micbias. -- qcom,micbias-lvl: Voltage (mV) for Mic Bias -- qcom,hphl-jack-type-normally-open: boolean, present if hphl pin on jack is a - NO (Normally Open). If not specified, then - its assumed that hphl pin on jack is NC - (Normally Closed). -- qcom,gnd-jack-type-normally-open: boolean, present if gnd pin on jack is - NO (Normally Open). If not specified, then - its assumed that gnd pin on jack is NC - (Normally Closed). -- qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor - connected. -- qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor - connected. - -Example: - -spmi_bus { - ... - audio-codec@f000{ - compatible = "qcom,pm8916-wcd-analog-codec"; - reg = <0xf000 0x200>; - reg-names = "pmic-codec-core"; - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; - interrupt-parent = <&spmi_bus>; - interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, - <0x1 0xf0 0x1 IRQ_TYPE_NONE>, - <0x1 0xf0 0x2 IRQ_TYPE_NONE>, - <0x1 0xf0 0x3 IRQ_TYPE_NONE>, - <0x1 0xf0 0x4 IRQ_TYPE_NONE>, - <0x1 0xf0 0x5 IRQ_TYPE_NONE>, - <0x1 0xf0 0x6 IRQ_TYPE_NONE>, - <0x1 0xf0 0x7 IRQ_TYPE_NONE>, - <0x1 0xf1 0x0 IRQ_TYPE_NONE>, - <0x1 0xf1 0x1 IRQ_TYPE_NONE>, - <0x1 0xf1 0x2 IRQ_TYPE_NONE>, - <0x1 0xf1 0x3 IRQ_TYPE_NONE>, - <0x1 0xf1 0x4 IRQ_TYPE_NONE>, - <0x1 0xf1 0x5 IRQ_TYPE_NONE>; - interrupt-names = "cdc_spk_cnp_int", - "cdc_spk_clip_int", - "cdc_spk_ocp_int", - "mbhc_ins_rem_det1", - "mbhc_but_rel_det", - "mbhc_but_press_det", - "mbhc_ins_rem_det", - "mbhc_switch_int", - "cdc_ear_ocp_int", - "cdc_hphr_ocp_int", - "cdc_hphl_ocp_det", - "cdc_ear_cnp_int", - "cdc_hphr_cnp_int", - "cdc_hphl_cnp_int"; - vdd-cdc-io-supply = <&pm8916_l5>; - vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; - vdd-micbias-supply = <&pm8916_l13>; - #sound-dai-cells = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml b/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml new file mode 100644 index 000000000000..c385028c4296 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,pm8916-wcd-analog-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8916 WCD Analog Audio Codec + +maintainers: + - Konrad Dybcio konradybcio@kernel.org + +description: + The analog WCD audio codec found on Qualcomm PM8916 PMIC. + +properties: + compatible: + const: qcom,pm8916-wcd-analog-codec + + reg: + maxItems: 1 + + reg-names: + items: + - const: pmic-codec-core + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mclk + + interrupts: + maxItems: 14 + + interrupt-names: + items: + - const: cdc_spk_cnp_int + - const: cdc_spk_clip_int + - const: cdc_spk_ocp_int + - const: mbhc_ins_rem_det1 + - const: mbhc_but_rel_det + - const: mbhc_but_press_det + - const: mbhc_ins_rem_det + - const: mbhc_switch_int + - const: cdc_ear_ocp_int + - const: cdc_hphr_ocp_int + - const: cdc_hphl_ocp_det + - const: cdc_ear_cnp_int + - const: cdc_hphr_cnp_int + - const: cdc_hphl_cnp_int + + vdd-cdc-io-supply: + description: 1.8V buck supply + + vdd-cdc-tx-rx-cx-supply: + description: 1.8V SIDO buck supply + + vdd-micbias-supply: + description: micbias supply + + qcom,mbhc-vthreshold-low: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Array of 5 threshold voltages in mV for 5-button detection on + headset when MBHC is powered by an internal current source. + minItems: 5 + maxItems: 5 + + qcom,mbhc-vthreshold-high: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Array of 5 threshold voltages in mV for 5-button detection on + headset when MBHC is powered from micbias. + minItems: 5 + maxItems: 5 + + qcom,micbias-lvl: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Voltage (mV) for Mic Bias + + qcom,hphl-jack-type-normally-open: + type: boolean + description: + True if the HPHL pin on the jack is NO (Normally Open), false if it's + NC (Normally Closed). + + qcom,gnd-jack-type-normally-open: + type: boolean + description: + True if the GND pin on the jack is NO (Normally Open), false if it's + NC (Normally Closed). + + qcom,micbias1-ext-cap: + type: boolean + description: + True if micbias1 has an external capacitor. + + qcom,micbias2-ext-cap: + type: boolean + description: + True if micbias2 has an external capacitor. + + "#sound-dai-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + #include <dt-bindings/interrupt-controller/irq.h> + + audio-codec@f000{ + compatible = "qcom,pm8916-wcd-analog-codec"; + reg = <0xf000 0x200>; + reg-names = "pmic-codec-core"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, + <0x1 0xf0 0x1 IRQ_TYPE_NONE>, + <0x1 0xf0 0x2 IRQ_TYPE_NONE>, + <0x1 0xf0 0x3 IRQ_TYPE_NONE>, + <0x1 0xf0 0x4 IRQ_TYPE_NONE>, + <0x1 0xf0 0x5 IRQ_TYPE_NONE>, + <0x1 0xf0 0x6 IRQ_TYPE_NONE>, + <0x1 0xf0 0x7 IRQ_TYPE_NONE>, + <0x1 0xf1 0x0 IRQ_TYPE_NONE>, + <0x1 0xf1 0x1 IRQ_TYPE_NONE>, + <0x1 0xf1 0x2 IRQ_TYPE_NONE>, + <0x1 0xf1 0x3 IRQ_TYPE_NONE>, + <0x1 0xf1 0x4 IRQ_TYPE_NONE>, + <0x1 0xf1 0x5 IRQ_TYPE_NONE>; + interrupt-names = "cdc_spk_cnp_int", + "cdc_spk_clip_int", + "cdc_spk_ocp_int", + "mbhc_ins_rem_det1", + "mbhc_but_rel_det", + "mbhc_but_press_det", + "mbhc_ins_rem_det", + "mbhc_switch_int", + "cdc_ear_ocp_int", + "cdc_hphr_ocp_int", + "cdc_hphl_ocp_det", + "cdc_ear_cnp_int", + "cdc_hphr_cnp_int", + "cdc_hphl_cnp_int"; + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; + #sound-dai-cells = <1>; + };