In case of capture we should not use rotation. The reverse and mask is enough to get the data align correctly from the bus to MCU: Format data from bus after reverse (XRBUF) S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB| S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB|
With this patch all supported formats will work for playback and capture.
Reported-by: Jyri Sarha jsarha@ti.com (broken S24_3LE capture) Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- sound/soc/davinci/davinci-mcasp.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 6a6b2ff7d7d7..68347b55f6e1 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -467,8 +467,17 @@ static int davinci_config_channel_size(struct davinci_mcasp *mcasp, { u32 fmt; u32 tx_rotate = (word_length / 4) & 0x7; - u32 rx_rotate = (32 - word_length) / 4; u32 mask = (1ULL << word_length) - 1; + /* + * For captured data we should not rotate, inversion and masking is + * enoguh to get the data to the right position: + * Format data from bus after reverse (XRBUF) + * S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB| + * S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| + * S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| + * S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB| + */ + u32 rx_rotate = 0;
/* * if s BCLK-to-LRCLK ratio has been configured via the set_clkdiv()