New functions for querying the FIFO caused delay on both TX and RX path. On TX path the return value shows the number of used locations in the FIFO. On RX papth it returns the number of locations to be filled to reach the threshold value (DMA will be triggered to read the data out from the FIFO).
Signed-off-by: Peter Ujfalusi peter.ujfalusi@nokia.com --- arch/arm/plat-omap/include/plat/mcbsp.h | 6 +++ arch/arm/plat-omap/mcbsp.c | 55 +++++++++++++++++++++++++++++++ 2 files changed, 61 insertions(+), 0 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 3974835..1bd7021 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -149,6 +149,8 @@ #define OMAP_MCBSP_REG_WAKEUPEN 0xA8 #define OMAP_MCBSP_REG_XCCR 0xAC #define OMAP_MCBSP_REG_RCCR 0xB0 +#define OMAP_MCBSP_REG_XBUFFSTAT 0xB4 +#define OMAP_MCBSP_REG_RBUFFSTAT 0xB8 #define OMAP_MCBSP_REG_SSELCR 0xBC
#define OMAP_ST_REG_REV 0x00 @@ -471,6 +473,8 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); u16 omap_mcbsp_get_max_rx_threshold(unsigned int id); +u16 omap_mcbsp_get_tx_delay(unsigned int id); +u16 omap_mcbsp_get_rx_delay(unsigned int id); int omap_mcbsp_get_dma_op_mode(unsigned int id); #else static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) @@ -479,6 +483,8 @@ static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) { } static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; } static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; } +static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; } +static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; } static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; } #endif int omap_mcbsp_request(unsigned int id); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e47686e..5e6d309 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -561,6 +561,61 @@ u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) } EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
+#define MCBSP2_FIFO_SIZE 0x500 /* 1024 + 256 locations */ +#define MCBSP1345_FIFO_SIZE 0x80 /* 128 locations */ +/* + * omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO + */ +u16 omap_mcbsp_get_tx_delay(unsigned int id) +{ + struct omap_mcbsp *mcbsp; + u16 buffstat; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return -ENODEV; + } + mcbsp = id_to_mcbsp_ptr(id); + + /* Returns the number of free locations in the buffer */ + buffstat = MCBSP_READ(mcbsp, XBUFFSTAT); + + /* Number of slots are different in McBSP ports */ + if (mcbsp->id == 2) + return MCBSP2_FIFO_SIZE - buffstat; + else + return MCBSP1345_FIFO_SIZE - buffstat; +} +EXPORT_SYMBOL(omap_mcbsp_get_tx_delay); + +/* + * omap_mcbsp_get_rx_delay returns the number of free slots in the McBSP FIFO + * to reach the threshold value (when the DMA will be triggered to read it) + */ +u16 omap_mcbsp_get_rx_delay(unsigned int id) +{ + struct omap_mcbsp *mcbsp; + u16 buffstat, threshold; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return -ENODEV; + } + mcbsp = id_to_mcbsp_ptr(id); + + /* Returns the number of used locations in the buffer */ + buffstat = MCBSP_READ(mcbsp, RBUFFSTAT); + /* RX threshold */ + threshold = MCBSP_READ(mcbsp, THRSH1); + + /* Return the number of location till we reach the threshold limit */ + if (threshold <= buffstat) + return 0; + else + return threshold - buffstat; +} +EXPORT_SYMBOL(omap_mcbsp_get_rx_delay); + /* * omap_mcbsp_get_dma_op_mode just return the current configured * operating mode for the mcbsp channel