On Tue, Oct 7, 2008 at 7:44 AM, Takashi Iwai tiwai@suse.de wrote:
At Mon, 6 Oct 2008 19:10:14 +0200, Klaas De Craemer wrote:
On Mon, Oct 6, 2008 at 12:57 PM, Takashi Iwai tiwai@suse.de wrote:
[please don't drop Cc to alsa-devel ML]
At Mon, 6 Oct 2008 12:48:43 +0200, Klaas De Craemer wrote:
Hello,
I'm sure that the audioquality will degrade somewhat because of the additional amplification, but before, the HP-out was not usable at all. I had to use an external ampli just to use my headphones, even after turning all volume sliders to 100%. Then again, when removing the HP, the volume though the internal speakers was way too loud...
I'm not sure what you mean with the output pin and headphone control, but I have uploaded the output of the codegraph tool before and after my modification here: http://users.vtk.be/~s0159120/codec_original.svg http://users.vtk.be/~s0159120/codec_final.svg
Below is the output of alsa-info with the patched module Klaas
Thanks.
So, if I understand correctly, when the pin 0x0a is connected directly from DAC0 0x10, the output level is too low even if you set the all volumes maximal.
That is correct.
In the alsa-info.sh output, I see the following:
Node 0x10 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0x5e 0x5e]
which means that you decrease the output level intentionally. Is the HP output still too low even if you set to the higher value?
No, after the patch I don't need 100% anymore.
Of course not :)
The HP output is fine now, and I can tune it up and down a bit. Before using the mixer-amp, going from 90 to 100 resulted in going from no sound to little sound. Now the range is more useful.
Could you check the raw value of the widget 0x10 without your patch? The percent doesn't tell you exactly what you changed.
Takashi
I have pasted the output of /proc/asound/card0/codec#0 below, without the patch. However, I'm not sure what you're exactly looking for? I'm quite new to all this stuff , but I'd be more than happy to help out more, so feel free to ask anything.
Also related, in windows (yeah i know), using the IDT drivers, the volume is extremely high :) So I went searching in the driver files and it seems that the widget configuration is specified there in an ini file. As far as I can see, the mixer is not configured, but an external amp is mentioned. Could it be that the external amp of 0x0A is not used in snd-hda-intel? Or maybe it refers to the "+3dBV output option on headphone capable ports" as mentioned in the datasheet... But I'm just guessing now.
Klaas
--------------- 92HDM4-1.INI --------------- [HKLM\SOFTWARE\IDT\Config\EventExpressions\JackPresensea] 110="if(JackState(10) == 1 || JackState(15) == 1,(BypassSystemEq(1)),(BypassSystemEq(0)))" 120="if(JackState(10) == 1 || JackState(15) == 1,(BypassSystemComp(1)),(BypassSystemComp(0)))" [HKLM\SOFTWARE\IDT\Config\EventExpressions\JackPresensef] 110="if(JackState(10) == 1 || JackState(15) == 1,(BypassSystemEq(1)),(BypassSystemEq(0)))" 120="if(JackState(10) == 1 || JackState(15) == 1,(BypassSystemComp(1)),(BypassSystemComp(0)))" [HKR] CodecName = "92HD71B8x" [HKR\Settings] InitVerbs = hex: TraceFlags = dword: 0x89B3 Biostype1 = hex: 1 EnablePcBeepAtCd = hex: 1 AllowHpOnNonSupportingPin = hex: 0 CPL_SaveExtraPower = hex: 1 CPL_MaySwitchExtAmpPowerState = hex: 1 CPL_SecondsAfter = dword: 30 EnableDLCDWA = hex: 1 PmEnabledWidget = hex: 0A,0B,0C,0D,0E,0F ShareSystemMicJackAsLine = hex: 1 AfgPowerStatePolicy = hex: 2 CPL_ControlAfgPowerState = hex: 0x1 KeepAnalogLoopbackAlwaysOn = hex: 0 DelayInMsAfterPortDisabling = dword: 0x40 SAEN = dword: 0x08 [HKR\Settings\pin] [HKR\Settings\Pin\0A] CfgDflt = dword: 0x0421101F Action = hex: 81,0D, 81,0F ExtAmpCtrl = hex: 00,05,02 [HKR\Settings\Pin\0B] [HKR\Settings\Pin\0C] CfgDflt = dword: 0x400003F0 [HKR\Settings\Pin\0D] CfgDflt = dword: 0x90170010 [HKR\Settings\Pin\0E] [HKR\Settings\Pin\0F] CfgDflt = dword: 0x2301401F Action = hex: 81,0D [HKR\Settings\Pin\14] CfgDflt = dword: 0x400003F0 [HKR\Settings\Pin\18] [HKR\Settings\Pin\19] CfgDflt = dword: 0x400003F0 [HKR\Settings\Pin\1E] [HKR\Settings\Pin\1F] CfgDflt = dword: 0x400000F0 [HKR\Settings\Pin\20] CfgDflt = dword: 0x400000F0 [HKR\Settings\Pin\27] CfgDflt = dword: 0x90300022 [HKR\Settings\GPIO] 00 = hex: 82
--------------- codecoutput_nonpatched --------------- Codec: IDT 92HD71B7X Address: 0 Vendor Id: 0x111d76b2 Subsystem Id: 0x1028024f Revision Id: 0x100302 No Modem Function Group found Default PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 GPIO: io=8, o=0, i=0, unsolicited=1, wake=1 IO[0]: enable=1, dir=1, wake=0, sticky=0, data=1 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0 Node 0x0a [Pin Complex] wcaps 0x400181: Stereo Pincap 0x081c: OUT HP Detect Pin Default 0x0421101f: [Jack] HP Out at Ext Right Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=30, enabled=1 Connection: 3 0x10 0x11* 0x17 Node 0x0b [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081724: IN Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x04a11221: [Jack] Mic at Ext Right Conn = 1/8, Color = Black DefAssociation = 0x2, Sequence = 0x1 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Node 0x0c [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081724: IN Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: VREF_HIZ Unsolicited: tag=00, enabled=0 Node 0x0d [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0814: OUT Detect Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 3 0x10 0x11 0x17* Node 0x0e [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081724: IN Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x23a1902e: [Jack] Mic at Sep Left Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0xe Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Node 0x0f [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0814: OUT Detect Pin Default 0x23014250: [Jack] Line Out at Sep Left Conn = 1/8, Color = Green DefAssociation = 0x5, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 3 0x10 0x11 0x17* Node 0x10 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0x72 0x72] Converter: stream=5, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x11 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0x65 0x65] Converter: stream=5, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x12 [Audio Input] wcaps 0x1d0541: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x1c Processing caps: benign=0, ncoeff=0 Node 0x13 [Audio Input] wcaps 0x1d0541: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x1d Processing caps: benign=0, ncoeff=0 Node 0x14 [Pin Complex] wcaps 0x400100: Mono Pincap 0x0810: OUT Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Connection: 1 0x16 Node 0x15 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x10* 0x11 0x17 Node 0x16 [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x15 Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x1f 0x1f] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] Connection: 5 0x10 0x11 0x27 0x1a 0x1b Node 0x18 [Pin Complex] wcaps 0x40000d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Pincap 0x0820: IN Pin Default 0x90a000f0: [Fixed] Mic at Int N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Node 0x19 [Pin Complex] wcaps 0x40000d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Pincap 0x0820: IN Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x01 0x01] Connection: 3 0x0b* 0x0c 0x0e Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 3 0x0b* 0x0c 0x0e Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x00 0x00] Connection: 4 0x1a* 0x17 0x18 0x19 Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 4 0x1b* 0x17 0x18 0x19 Node 0x1e [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x4f0000f0: [N/A] Line Out at Ext UNKNOWN Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Connection: 1 0x24 Node 0x1f [Pin Complex] wcaps 0x400701: Stereo Digital Pincap 0x0810010: OUT EAPD EAPD 0x0: Pin Default 0x40f000f6: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x6 Pin-ctls: 0x00: Power: setting=D0, actual=D0 Connection: 2 0x24* 0x25 Node 0x20 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x40f000f7: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x7 Pin-ctls: 0x00: Connection: 1 0x25 Node 0x21 [Audio Output] wcaps 0x40211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 4 samples Node 0x22 [Audio Output] wcaps 0x40211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 4 samples Node 0x23 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x24 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x21* 0x1c 0x1d Node 0x25 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x22* 0x1c 0x1d Node 0x26 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1 Amp-Out vals: [0x00] Node 0x27 [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Node 0x28 [Volume Knob Widget] wcaps 0x600000: Mono Volume-Knob: delta=1, steps=127, direct=1, val=127 Connection: 2 0x10* 0x11