This patch series is to add audio support based on saif for mxs platform. The driver only supports playback currently. For capturing, due to hardware limitation that we have to use two saif instances to implement full duplex (playback & recording), we need to figure out a good design to fit in ASoC as the following work.
In addition, we simply just support master mode since saif tx can only work as a master due to hw limitation(rx can work in both master & slave mode).
Code is written based on the branch imx-for-3.1 in sascha's tree http://git.pengutronix.de/git/imx/linux-2.6.git
Tested on MX28EVK.
For the ASoC-patches (1-4): Tested-by: Wolfram Sang w.sang@pengutronix.de For the mach-mxs-Patches (5-10): Reviewed-by: Wolfram Sang w.sang@pengutronix.de
Changes since v3: This version only has one patch changed with another two for rebase the changed one. * [PATCH v4 06/10] ARM: mxs: add saif device Drop DIGCTRL-handling based on Wolfram's comment * [PATCH v4 07/10] ARM: mxs: add sgtl5000 i2c device Resend for rebase [PATCH v4 06/10] ARM: mxs: add saif device * [PATCH v4 08/10] ARM: mxs: add mxs-sgtl5000 device Resend for rebase [PATCH v4 06/10] ARM: mxs: add saif device
changes since v2: * mxs-pcm - fix wrong periods_max. - For robustness replace the channels_min check with a check for the relevant substream being present * mxs-saif - Add IRQ_NONE handle - improve mxs_saif_set_clk to make it more easy to read - correct return value - request_irq sequence changed to after ioremap * mxs-sgtl5000 - clean up a few unused code * Kconfig&Makefile - SND_SOC_MXS_SGTL5000 should depend on I2C in Kconfig * mxs - Select MXS_I2C in kconfig for mxs-sgtl5000
changes since v1: * export saif mclk control interface to machine driver. Machine driver can decide whether it needs to use mclk supplied by saif according to its requirement. * error checking improvement * remove a few unneccesary code
Dong Aisheng (10): ASoc: mxs: add mxs-pcm driver ASoc: mxs: add mxs-saif driver ASoc: mxs: add mxs-sgtl5000 machine driver ASoc: mxs: add asoc configuration files ARM: mxs: add saif clock ARM: mxs: add saif device ARM: mxs: add sgtl5000 i2c device ARM: mxs: add mxs-sgtl5000 device ARM: mxs: correct the using of frac div for saif ARM: mxs-dma: include <linux/dmaengine.h>
arch/arm/mach-mxs/Kconfig | 2 + arch/arm/mach-mxs/clock-mx28.c | 8 +- arch/arm/mach-mxs/devices-mx28.h | 3 + arch/arm/mach-mxs/devices/Kconfig | 3 + arch/arm/mach-mxs/devices/Makefile | 1 + arch/arm/mach-mxs/devices/platform-mxs-saif.c | 60 ++ arch/arm/mach-mxs/include/mach/devices-common.h | 12 + arch/arm/mach-mxs/include/mach/dma.h | 2 + arch/arm/mach-mxs/mach-mx28evk.c | 35 ++ sound/soc/Kconfig | 1 + sound/soc/Makefile | 1 + sound/soc/mxs/Kconfig | 20 + sound/soc/mxs/Makefile | 10 + sound/soc/mxs/mxs-pcm.c | 359 ++++++++++++ sound/soc/mxs/mxs-pcm.h | 43 ++ sound/soc/mxs/mxs-saif.c | 677 +++++++++++++++++++++++ sound/soc/mxs/mxs-saif.h | 130 +++++ sound/soc/mxs/mxs-sgtl5000.c | 165 ++++++ 18 files changed, 1530 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-mxs/devices/platform-mxs-saif.c create mode 100644 sound/soc/mxs/Kconfig create mode 100644 sound/soc/mxs/Makefile create mode 100644 sound/soc/mxs/mxs-pcm.c create mode 100644 sound/soc/mxs/mxs-pcm.h create mode 100644 sound/soc/mxs/mxs-saif.c create mode 100644 sound/soc/mxs/mxs-saif.h create mode 100644 sound/soc/mxs/mxs-sgtl5000.c